Sillyvain Posted April 25, 2020 Share Posted April 25, 2020 (edited) I have been having an issue with Unraid on my server. If I start a fresh install of Unraid and I setup the network and the arrays of 2 drives for now after a couple of reboots I am unable to connect the my network. it's intermittent. So what I do is I stop my server and pull out the usb thumb drive and wipe the content of network.cfg and insert these into the file. USE_DHCP=no IPADDR=192.168.1.230 NETMASK=255.255.255.0 GATEWAY=192.168.1.1 Then the system will be fine for a while until I go into the App section and I see that I get an error that it cannot connect to the Community Applications app and it gives a few pointers to try to enter a set of dns's. Then again I pull the usb thumb drive out and wipe the content of network.cfg all of again. I also downloaded Notepad ++ and save the file in Linux file system so I don't mess up the file Also I also tried 2 usb keys a Kingston 2.0 and brand new Sandisk USB 2.0 and same issues. I switched Network cards also with the same model same issue. I did pay for a basic license for now and I was looking forward to get another 7 licenses since I own 8 servers. Edited April 25, 2020 by Sillyvain typos Quote Link to comment
bonienl Posted April 25, 2020 Share Posted April 25, 2020 You are missing DNS entries. Please use the GUI to configure your network and add DNS. Quote Link to comment
Sillyvain Posted April 25, 2020 Author Share Posted April 25, 2020 (edited) After I re-created the network.cfg file I boot into Unraid and configure the network settings all over again . I tried my ISP dns and also 8.8.8.8 8.8.4.4. same issue. I should of added that part in my original post.. sorry I use the gui to configure everything which I was doing originally.. I was entering the ip , subnet and gateway and slap in the pc and then configure the rest in the gui Edited April 25, 2020 by Sillyvain typos Quote Link to comment
bonienl Posted April 25, 2020 Share Posted April 25, 2020 Please post your diagnostics file, see Tools -> Diagnostics Quote Link to comment
Sillyvain Posted April 25, 2020 Author Share Posted April 25, 2020 (edited) Here you go sulaco-diagnostics-20200425-0508.zip Edited April 25, 2020 by Sillyvain Quote Link to comment
bonienl Posted April 25, 2020 Share Posted April 25, 2020 Everything looks alright, I don't see issues and configuration is correct. Have you changed some interface settings using the "Tips and Tweaks" plugin? When the problem re-occurs, please post diagnostics again. Quote Link to comment
Sillyvain Posted April 26, 2020 Author Share Posted April 26, 2020 (edited) The only thing I change in Tips and Tweaks was maximum CPU profile.. that's it. It fine if I don't reboot Edited April 26, 2020 by Sillyvain Quote Link to comment
Sillyvain Posted May 1, 2020 Author Share Posted May 1, 2020 (edited) I just re I just rebooted another UnRaid Server that was running great for a week and when it came back on it lost the network connectivity. My server has an option for an micro sd card and I will try to see if I boot from it would resolves the issue. Edited May 1, 2020 by Sillyvain Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.