CrunchyToast Posted June 26, 2020 Share Posted June 26, 2020 (edited) Hello, I'm having an issue with VLANs on unRAID. On my network I have VLAN 3 setup. Anything I plug directly into the switch ports functions as it should with the VLAN. If I try and use the VLAN on unRAID, it won't work (no network connection). I tried with a VM as well and had the same result. Docker and VMs work just fine if I use br0. On unRAID I created the VLAN on my eth0 connection. VLAN Number: 3 Connection: br0.3 Protocol: IPv4 Address Assignment: None Docker: IPv4 custom network on interface br0.3: Subnet: 192.168.3.0/24 Gateway: 192.168.3.1 DHCP pool: not set If I configure a VM to use br0.3, it does not pull an IP from DHCP. There is no connection even if I assign one manually. Let me know if you need additional info. Any ideas as to what could be going on? Resolution: I was overthinking the issue. Recently I swapped out my gateway for a new one. During configuration, I tagged the eth0 port on the switch to use only LAN instead of All Networks. A switch of that setting resolved it. I'm going to leave this post so others also remember the more simple things. Edited June 26, 2020 by CrunchyToast Added Resolution 4 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.