David Dernovoj Posted July 3, 2020 Share Posted July 3, 2020 (edited) Hi, I just received my new server which consists of: Supermicro H11-SSLi Epyc 7702P 8x64GB 2933MHz RAM 8x 14 TB HDD 4x4TB NVMe SSD and tried to boot unraid from two different USB devices. However, when I'm in the boot menu and select the device to boot from, it just prompts me back to the boot menu. I don't believe it is a boot configuration problem in the BIOS because I can boot to a different USB stick I had ESXi on. I used the unraid installer tool to create my bootable USB device for unraid 6.8.3 stable. Any help would be much appreciated, please let me know if I need to provide more info. Edited July 3, 2020 by David Dernovoj Quote Link to comment
JorgeB Posted July 3, 2020 Share Posted July 3, 2020 Try booting in UEFI mode, you need to enable it when creating the boot device, or go to the flash drive and rename EFI- to EFI. Quote Link to comment
rachid596 Posted July 3, 2020 Share Posted July 3, 2020 Try to enable csm support in the bios. Quote Link to comment
rachid596 Posted July 3, 2020 Share Posted July 3, 2020 Try to change Peer type of access. Quote Link to comment
David Dernovoj Posted July 3, 2020 Author Share Posted July 3, 2020 (edited) 8 minutes ago, johnnie.black said: Try booting in UEFI mode, you need to enable it when creating the boot device, or go to the flash drive and rename EFI- to EFI. Wow, if I had known it could be so easy... I thought it was something about UEFI but I wasn't sure what to do Renaming did the trick, but how would I enable it in the flash creator? Customize -> Allow UEFI Boot? Thank you rachid for your suggestions, too. Looks like it was as simple as getting the EFI boot to work. Now I just need to get it up and running, but that's for me to play around with again. Edit: I'm new here as you can probably tell, can I somehow mark this as resolved? Edited July 3, 2020 by David Dernovoj Quote Link to comment
JorgeB Posted July 3, 2020 Share Posted July 3, 2020 30 minutes ago, David Dernovoj said: Customize -> Allow UEFI Boot? Yep. Quote Link to comment
WolfgangM Posted August 17, 2020 Share Posted August 17, 2020 Hallo David, I am about to order a System with the AMD EPYC 7232P on the H11SSL-i (Rev. 2.0) board. Are you confident with the compatibility and stability of the EPYC 2 platform running the actual stable release? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.