BastiArts Posted July 27, 2020 Share Posted July 27, 2020 Hey guys, Yesterday I built my new machine with an AMD Ryzen7 CPU and a ROG Strix B550 -F Mainboard. I configured the BIOS as written in the Unraid-Manual, but when I boot up Unraid it says: IPv4 address: not set IPv6 address: not set (Unraid Version 6.8.3) Setting bonding to "no" gives me an IP with 169.xxx.xxxx.xxx, which means that the machine can't connect to my router/DHCP server. So I tried setting a static IP, which I couldn't reach via Browser. Also pinging e.g. the router fails in both cases. I also made diagnostics, which are attached below. P.S The Intel LAN Controller in BIOS settings is enabled (by default) if this matters. Is it possible that my router (Asus RT-AC58U) has troubles with the 2.5Gbit Ethernet Port on my mobo? Or maybe Unraid doesn't support the Ethernet drivers? I hope you guys can help me fixing this problem. Thanks in advance :) tower-diagnostics-20200727-1507.zip Quote Link to comment
BastiArts Posted July 28, 2020 Author Share Posted July 28, 2020 Thanks for your reply, but unfortunately it still doesn't work. (even with the 6.9.0-beta25) I tried it once again with DHCP and with a static IP. In both cases it can't connect. On the router Dashboard under "Connected Devices" my machine also doesn't show up. Diagnostics attached below. I have no clue tower-diagnostics-20200728-0148.zip Quote Link to comment
BastiArts Posted July 28, 2020 Author Share Posted July 28, 2020 I can finally access the WebGUI. The solution was: I switched to Unraid OS version 6.9.0-beta25 (It only works with this version in my case) I reset my router and tweaked some settings I switched to another RJ-45 cable and I used a static IP address Thank you @jonathanm for the tip with the beta version Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.