Hard Drive Report Review

[jsmontague]

UnRaid sent an alert yesterday that one of my hard drives pending sector count increased so after reviewing some notes and posts I wanted to make sure my understanding was right. It has a "PASS" for health but if I look at a few areas I think this disk might finally need replaced. 

 

SMART extended results attached. The values "raw_read_error_rate" and "multi_zone_error_rate" are not incrementing but they are high and now a pending sector this guy should go right?

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    547

197 Current_Pending_Sector  -O--CK   200   200   000    -    1

200 Multi_Zone_Error_Rate   ---R--   200   200   000    -    12

 

 

alexandria-smart-20200731-0705.zip

[JorgeB]

11 minutes ago, jsmontague said:

It has a "PASS" for health

That is mostly useless, it only changes if there's failing now attribute.

 

Disk passed a recent extended SMART test, so it's fine for now (or it was at that time) and the pending sector is a "false positive", but SMART is showing some issues, likely will have more problems in the near future.

[jsmontague]

Thanks for checking! I just ran an extended smart test yesterday after the UnRaid alert. So this drive is still "on its way out" then vs on the edge of death?

[JorgeB]

5 minutes ago, jsmontague said:

So this drive is still "on its way out" then vs on the edge of death?

It's difficult to say, it can be good for weeks or months to come, or it can give more issues tomorrow.

[jsmontague]

I have a drive on standby as I have a couple of these guys with high counters but are running fine for last few months in unRaid and years prior in my windows server. Might just bight the bullet and get started swapping them out while they are running I guess. Its only money right 😂

 

Thanks for help!