gadgetzombie Posted August 26, 2020 Share Posted August 26, 2020 Hi all, I have a 6TB drive that unraid has disabled due to read and write errors and is emulating. First thing I did was check the SATA connections and then I ran an extended SMART test which passed (results attached) as it passed is this drive safe to still use? If that is the case then to get up and running again I should unassign/reassign the drive and start rebuild? I didn't catch the drive being disabled for a day while my dockers were still running - should I be worried about recent writes being corrupted? Diagnostics attached - looks like the read/write errors started at "Aug 24 20:56" Thanks in advance tower-smart-20200826-1034.zip tower-diagnostics-20200825-1746.zip Quote Link to comment
JorgeB Posted August 26, 2020 Share Posted August 26, 2020 Disk is showing some issues on SMART, and it did fail a recent extended test, but since it passed the last one it should be OK for now, you can rebuild on top but any more read errors/failed tests in the near future best to replace it. 10 minutes ago, gadgetzombie said: I didn't catch the drive being disabled for a day while my dockers were still running - should I be worried about recent writes being corrupted? Since it was disabled Unraid emulates the disk, and any writes to that disk still go there, and will be on the rebuilt disk. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.