iwearshoes Posted October 1, 2020 Share Posted October 1, 2020 (edited) Hello, I have a new Unraid instance I have setup on a Dell r620 (10x 1TB drives). I find all the drives fine, however it will not find the network. The server has both a IPMI Motherboard port as well as a 4 port 10Gb card - I am assuming the issue is with the Port bonding settings, however - being new to unraid, I am not familiar with how I should properly configure it. Any advice would be appreciated. Fix: for r620 servers - make sure you are running bios 2.9.0, also depending on the riser card installed, disable port bonding. Edited October 1, 2020 by iwearshoes Quote Link to comment
JorgeB Posted October 1, 2020 Share Posted October 1, 2020 Please post the diagnostics, you can get them by typing "diagnostics" on the console. Quote Link to comment
iwearshoes Posted October 1, 2020 Author Share Posted October 1, 2020 (edited) I actually figured out the fix, had to update the bios and it worked on the riser card ports. I am having some other issues, but I will start a new thread for those. Thank you for your reply! Edited October 1, 2020 by iwearshoes Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.