Banana Posted October 18, 2020 Share Posted October 18, 2020 (edited) I hit did a disk clear that added my 8tb replacement for a 4tb failed drive (Disk 10) as 'Disk 11' - How can I remove drive 11, and make it a replacement for the failed drive 10 without getting a "too many wrong and/or missing disks!" - Drive 10 has failed - 'x' - Drive 11 is 'Unmountable,- "Unsported partition layout" and pending me clicking the format button. - Drive 11 needs to replace drive 10 - Unraid says "too many wrongs and/or missing disks!" when I try to unmount Disk 11 for replacement of disk 10 because disk 10 has already failed My array is at 99% filled. Do y'all know how I can fix this? Edited October 18, 2020 by Banana spelling Quote Link to comment
JorgeB Posted October 18, 2020 Share Posted October 18, 2020 If you didn't format disk11 parity is still valid without it, so you can use the invalid slot command, but since you didn't post the diags more info is needed, what Unraid release are you using and does it have single or dual parity? Quote Link to comment
Banana Posted October 18, 2020 Author Share Posted October 18, 2020 Single parity, 6.8.3. I've seen your prior quote: " Follow the instructions below carefully and ask if there's any doubt. -Tools -> New Config -> Retain current configuration: All -> Apply -Check all assignments and assign any missing disk(s) if needed, like old disk1 -Important - After checking the assignments leave the browser on that page, the "Main" page. -Open an SSH session/use the console and type (don't copy/paste directly from the forum, as sometimes it can insert extra characters): ``` mdcmd set invalidslot 1 29 ``` -Back on the GUI and without refreshing the page, just start the array, do not check the "parity is already valid" box (GUI will still show that data on parity disk(s) will be overwritten, this is normal as it doesn't account for the invalid slot command, but they won't be as long as the procedure was correctly done), disk1 will start rebuilding, disk should mount immediately (probably not in this case) but if it's unmountable don't format, wait for the rebuild to finish (or cancel it) and then run a filesystem check. " Quote Link to comment
JorgeB Posted October 19, 2020 Share Posted October 19, 2020 12 hours ago, Banana said: I've seen your prior quote: Yes, that's it, just replace 1 with the number of the disk you want to rebuild, 29 is for parity2 which also needs to be used when there isn't one. Quote Link to comment
Banana Posted October 20, 2020 Author Share Posted October 20, 2020 Posting this for the next person to find this thread: https://wiki.unraid.net/index.php/Replacing_Multiple_Data_Drives_with_a_Single_Larger_Drive Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.