NLDer Posted December 5, 2020 Share Posted December 5, 2020 Morning fellow unRaiders! Wondering about my hard drives and if they need replacement. I am attaching log files, and asking for help as I am not in tune with hard drive diagnostics these days. My parity check identified some read issues, and then I performed the SMART tests on both drives. Should I replace these before they die? or are these errors that can be ignored? Any help / insight is greatly appreciated. Disk4.txt Disk3.txt Quote Link to comment
JorgeB Posted December 6, 2020 Share Posted December 6, 2020 Both failed the SMART test so they should be replaced. 1 Quote Link to comment
NLDer Posted December 10, 2020 Author Share Posted December 10, 2020 Thanks JorgeB! Just picked myself up 2 new WD RED's at 6TB each. Quote Link to comment
NLDer Posted December 11, 2020 Author Share Posted December 11, 2020 (edited) I am running in to PreClear errors... without any actual errors showing, except a warning? In the MAIN tab I see an error stating: "Error encountered, please verify the log" The log: Dec 10 08:15:08 Tower kernel: sd 1:0:0:0: [sdb] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB) Dec 10 08:15:08 Tower kernel: sd 1:0:0:0: [sdb] 4096-byte physical blocks Dec 10 08:15:08 Tower kernel: sd 1:0:0:0: [sdb] Write Protect is off Dec 10 08:15:08 Tower kernel: sd 1:0:0:0: [sdb] Mode Sense: 7f 00 10 08 Dec 10 08:15:08 Tower kernel: sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA Dec 10 08:15:08 Tower kernel: sd 1:0:0:0: [sdb] Attached SCSI disk Dec 10 08:15:32 Tower emhttpd: WD-XXXXXXX Dec 10 08:25:18 Tower preclear_disk_WD-XXXXXXX: Command: /usr/local/emhttp/plugins/preclear.disk/script/preclear_disk.sh --notify 2 --frequency 1 --cycles 1 --no-prompt /dev/sdb Dec 10 08:25:23 Tower preclear_disk_WD-XXXXXXX: Pre-Read: dd if=/dev/sdb of=/dev/null bs=2097152 skip=0 count=6001175126016 conv=notrunc,noerror iflag=nocache,count_bytes,skip_bytes Dec 10 08:30:31 Tower preclear.disk: Pausing preclear of disk 'sdb' Dec 10 08:30:51 Tower preclear.disk: Resuming preclear of disk 'sdb' Dec 10 12:40:07 Tower preclear_disk_WD-XXXXXXX: Zeroing: dd if=/dev/zero of=/dev/sdb bs=2097152 seek=2097152 count=6001173028864 conv=notrunc iflag=count_bytes,nocache,fullblock oflag=seek_bytes and the Preview sits here: unRAID Server Preclear of disk WD-XXXXXXX Cycle 1 of 1, partition start on sector 64. Step 1 of 5 - Pre-read verification: [4:14:25 @ 393 MB/s] SUCCESS Step 2 of 5 - Zeroing in progress: (99% Done) Time elapsed: 11:22:38 | Write speed: 86 MB/s | Average speed: 146 MB/s Cycle elapsed time: 15:37:07 | Total elapsed time: 15:37:08 ##### # # # S.M.A.R.T. Status (device type: default) ATTRIBUTE INITIAL STATUS 5-Reallocated_Sector_Ct 0 - 9-Power_On_Hours 0 - 194-Temperature_Celsius 25 - 196-Reallocated_Event_Count 0 - 197-Current_Pending_Sector 0 - 198-Offline_Uncorrectable 0 - 199-UDMA_CRC_Error_Count 0 - SMART overall-health self-assessment test result: PASSED It looks to be running, but no time indicator anymore. I still have the red X option to "Stop Preclear" Anyone have any thoughts on this before I hit the X in error when I should be letting it do it's thing? At the bottom of my window it does state: "Read Check 46%" but I don't know if that is to do with the Preclear. Edited December 11, 2020 by NLDer Quote Link to comment
JorgeB Posted December 11, 2020 Share Posted December 11, 2020 You'd need to ask in the plugin support thread. 1 Quote Link to comment
NLDer Posted December 11, 2020 Author Share Posted December 11, 2020 2 minutes ago, JorgeB said: You'd need to ask in the plugin support thread. Will do Thanks Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.