Jump to content

  • xhci_hcd IO page fault when attempting to update

    Ryokurin

    By Ryokurin

      • Solved Urgent

    I've found the following error when I attempt to update to the latest RC

     

    xhci_hcd 000:03:00.0: AMD-vi: Event logged [IO_PAGE_FAULT domain=0x000 address=0x00000000fff96000 flags=0x000]

    dev/disk/by-label: 248 files, 11633/978499 clusters

    xhci_hcd 0000:03:00.0: Timeout while waiting for setup device command

     

    After this there's basically "usb11-1: device not responding to setup address" errors until the login prompt appears.  The server does not pull an IP address and unfortunately, because I've only been using unraid for about a month I'm not familiar with how to pull the logs from the drive.  

    System specs are as follows:  

    M/B: MSI - A88X-G45 GAMING (MS-7900)

    CPU: AMD A10 PRO-7850B R7, 12 Compute Cores 4C+8G @ 3700

    HVM: Enabled

    IOMMU: Enabled

    Cache: 256 kB, 4096 kB

    Memory: 24 GB (max. installable capacity 24 GB)

    Network: eth0: 1000 Mb/s, full duplex, mtu 1500

    Go to reports Prereleases

    User Feedback

    Recommended Comments

    Taddeusz

    Your Unraid flash drive should be plugged into a USB 2.0 port. If it's plugged into USB 3.0 you should shut down Unraid, move it, and boot back up.

    Link to comment
    itimpi
    4 hours ago, Ryokurin said:

    That was it.  I didn't realize the 2.0 port requirement.  Thank you!

    Technically USB 2.0 is not an absolute requirement.    It is just that experience has shown that USB 2.0 seems to be far less likely to drop the flash drive offline unexpectedly.

    Link to comment


    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Restore formatting

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

    ×

  • Status Definitions

     

    Open = Under consideration.

     

    Solved = The issue has been resolved.

     

    Solved version = The issue has been resolved in the indicated release version.

     

    Closed = Feedback or opinion better posted on our forum for discussion. Also for reports we cannot reproduce or need more information. In this case just add a comment and we will review it again.

     

    Retest = Please retest in latest release.

    Priority Definitions

     

    Minor = Something not working correctly.

     

    Urgent = Server crash, data loss, or other showstopper.

     

    Annoyance = Doesn't affect functionality but should be fixed.

     

    Other = Announcement or other non-issue.

×
×
  • Create New...