Jump to content

darksupernova

Members
 View Profile  See their activity

  • Posts

    21

  • Joined

  • Last visited

 Content Type 

Posts posted by darksupernova

    Drive failures, SMART passing - can you confirm I'm doing the right thing?

    in Storage Devices and Controllers

    Posted

    Afternoon all,

     

    I have had a really good browse around on the forums to come to a conclusion of what to do but wanted to check with you first.

     

    Recently I got a warning regarding errors on my parity drive. There are three errors recorded with the "read failure" status, please note that these errors occurred during extended offline self-tests

     

    I don't want to replace the drive sooner than is required. It's just below 20k hours and I've read on here that people run drives to 50k so it feels early.

     

    SMART is passing but I'm concerned about these errors.

     

    Do you have any advice? My conclusion from reading is that its safer to replace the drive and just live with the fact it was half the life I was expecting. If its not required, then I'd rather spend elsewhere. 

     

    Thanks,

     

    Max

    tower-diagnostics-20230720-1541.zip tower-smart-20230720-1533.zip

    Docker unresponsive - autostart toggle constantly changing, unraid logo appearing

    in Docker Engine

    Posted

    Morning all,

     

    I tried to update my containers using docker compose (this is how all containers have been created) and the afterwards and I'm getting some weird behaviour. 

     

    On the docker ui in unraid web ui the unraid logo keeps flashing up and disappearing. The containers themselves are all toggling between autostart on and off. The page is unresponsive. The docker cli is also unresponsive. A restart hasn't helped. 

     

    I'm not sure what else to try!

     

    Any help greatly appreciated. Video and logs attached.

    tower-diagnostics-20220720-1119.zip

    Server unreachable randomly - new router

    in General Support

    Posted

    Hey there,

     

    Virgin Media came and replaced their old router with a new one. The server plugs directly into this router. It boots normally and can be accessed remotely but then at some point in time (10 mins to an hour or so later) suddenly becomes unreachable. 

     

    The problem must be the new router because nothing else has changed but I cannot see any settings that would cause this intermittent access. Interestingly earlier I was pinging the server and had a 25% ish response rate, so some messages are getting through.

     

    I wondered if anyone else had experienced this behaviour and might have some advice?

     

    Diags attached for reference.

     

    Cheers :)

    tower-diagnostics-20220618-0943.zip

    Failing drive - format before replacing?

    in General Support

    Posted

    Hi there,

     

    I'm sure this has been answered before. I apologise if I missed something, the topics I found had just enough nuance to dissuade me from trying just in case it went wrong. 

     

    I have a drive that is failing and I would like to replace it with a new drive. I want to format the old drive before it goes in the bin. I don't have enough cabling to plug in any additional drives (therefore cannot have the old drive and new drive both connected). I am aware that I can simply unplug it and plug in a new drive to rebuild it (from parity). Question is, can I format the old drive before taking it out without losing the data on the parity disks or effecting the rebuild process for the new drive in anyway?

     

    What do you recommend?

     

    Thanks,

     

    Max

    Help diagnosing hard disk errors

    in General Support

    Posted

    Evening @JorgeB, I have completed both extended smart reports, please see these attached. To assist with my learning, what are we looking for here? I note that disk 2 shows errors but I'm not sure I understand how to solve. 

     

    Interestingly disk 1 says it completed the report without errors but still has 168 errors logged against it in the main array.

     

    Any help appreciated.

     

    All the best

    disk2-tower-smart-20220414-1123.zip disk1-tower-smart-20220414-1123.zip

    Help diagnosing hard disk errors

    in General Support

    Posted

    Hi there,

     

    I'm very new to unraid but have been taking the time to read through the docs to try and diagnose this problem. I _think_ I understand but wanted to confirm with you first before shelling out for new drives.

     

    History:

    • Moved two drives from Synology NAS into new unraid system (formatted them)
    • Drives reported as healthy with no errors in Synology but I'm getting over 9000 errors in unraid
    • Have tried new cables and reseating the plugs etc

     

    Please see attached SMART reports. The results look pretty bad, and I think it's due to their age. Is there any way to recover these ones? I'm happy to reformat them if needed.

     

    Thanks in advance for your help :)

    disk1-tower-smart-20220414-1123.zip disk2-tower-smart-20220414-1123.zip

    [Support] binhex - DelugeVPN

    in Docker Containers

    Posted · Edited by darksupernova
    solved

    Hey @binhex thank you for the ongoing support of this container, it's excellent.

     

    I recently switched to using Prowlarr and have it set to use Deluge's VPN connection. I have followed the FAQs to add the ports to `VPN_INPUT_PORTS` so that I can access it via its web UI. I have added the ports for Sonarr and Radarr to `VPN_OUTPUT_PORTS` but I cannot seem to get Prowlarr to connect. Radarr / Sonarr can connect successfully to prowlarr but not the other way around.

    I have tried using radarr's container ip address (eg 172.18.0.5) and I have also tried with the docker gateway (172.17.0.1) without luck.

     

    I've read though many pages of comments on here but still can't figure it out.

    Any advice very welcome!

     

    SOLVED:

    I had to use http://172.18.0.1:7878/radarr as the ip address for Radar. I'm not sure what network that is or why it needs /radarr at the end but it works now. Spotted this address in the graphs section.

    [Support] binhex - DelugeVPN

    in Docker Containers

    Posted

    Hello,

     

    I am having trouble getting this to work when ZeroTier is installed - it seems the container stops working. Running in docker on a synology NAS.

     

    The error I'm getting is:

     

    2020-01-05 15:09:06,973 DEBG 'start-script' stderr output:

    Error: error sending query: Could not send or receive, because of network error

     

    I've checked the config and been through the FAQ, everything was working perfectly before zerotier was installed. Deluge is not running on the Zerotier network (LAN_Network) nor do I need it to.

     

    Please can you advise some things for me to try?

    Thanks!

×
×
  • Create New...