dja
-
Posts
198 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by dja
-
-
1 hour ago, ich777 said:
Please turn off your server entirely, pull the power cord from the wall, press the on/off button and the reset button a few times (to empty the caps), wait for 30 seconds, plug the power cord back in the wall and boot the server again.
Sounds stupid but please try this.
Well darn. Still no luck. Powered off like you said and mashed the power/reset buttons with cable out. Even removed the card and tried power with that out. No dice.
-
17 minutes ago, ich777 said:
Please try to roll back to rc4 or the last version that you where on and please see if it's the same there too.
Reverted to RC4, same thing...although I didn't remove, reboot, install, reboot the driver. I can do that if you think it makes a difference?
-
1 hour ago, ich777 said:
Please remove the plugin entirely, reboot, pull a fresh copy from the CA App, reboot again and see if the issue persists or if it fixes it.
No dice. Dang. I was really hoping that was it.
New diags attached.
-
I seem to have lost my DVB card after the last Unraid update and the update yesterday didn't help. (6.11.0-rc5) It was working previously. I don't know that it is related, but the timing is suspect?
I have a Hauppauge WinTV-quadHD PCI Express TV Tuner Card 1609 and was using the LibreELEC driver. I have powered off, checked connections. I'm seeing some related logging but I'm not sure what to make of it. I received an automated email with this message-
/boot/config/plugins/dvb-driver/packages/Prevent/: Is a directory
/boot/config/plugins/nvidia-driver/packages/Prevent/: Is a directoryDiagnostics attached. Any help would be greatly appreciated!
Sep 14 09:42:38 ZEUS root: Executing hook script: post_plugin_checks Sep 14 09:42:38 ZEUS root: plugin: installing: dvb-driver.plg Sep 14 09:42:38 ZEUS root: Executing hook script: pre_plugin_checks Sep 14 09:42:38 ZEUS root: plugin: running: anonymous Sep 14 09:42:38 ZEUS root: plugin: checking: /boot/config/plugins/dvb-driver/dvb-driver-2022.07.20.txz - MD5 Sep 14 09:42:38 ZEUS root: plugin: skipping: /boot/config/plugins/dvb-driver/dvb-driver-2022.07.20.txz already exists Sep 14 09:42:38 ZEUS root: plugin: running: /boot/config/plugins/dvb-driver/dvb-driver-2022.07.20.txz Sep 14 09:42:38 ZEUS root: Sep 14 09:42:38 ZEUS root: +============================================================================== Sep 14 09:42:38 ZEUS root: | Installing new package /boot/config/plugins/dvb-driver/dvb-driver-2022.07.20.txz Sep 14 09:42:38 ZEUS root: +============================================================================== Sep 14 09:42:38 ZEUS root: Sep 14 09:42:38 ZEUS root: Verifying package dvb-driver-2022.07.20.txz. Sep 14 09:42:38 ZEUS root: Installing package dvb-driver-2022.07.20.txz: Sep 14 09:42:38 ZEUS root: PACKAGE DESCRIPTION: Sep 14 09:42:38 ZEUS root: Package dvb-driver-2022.07.20.txz installed. Sep 14 09:42:38 ZEUS root: plugin: creating: /usr/local/emhttp/plugins/dvb-driver/README.md - from INLINE content Sep 14 09:42:38 ZEUS root: plugin: running: anonymous Sep 14 09:42:38 ZEUS root: Sep 14 09:42:38 ZEUS root: -----------------Downloading libreelec-DVB-Driver-Package------------------- Sep 14 09:42:38 ZEUS root: ---------This could take some time, please don't close this window!--------- Sep 14 09:42:39 ZEUS root: Sep 14 09:42:39 ZEUS root: -----------Successfully downloaded libreelec-DVB-Driver-Package------------ Sep 14 09:42:39 ZEUS root: ------------------------Please wait, installing...!------------------------- Sep 14 09:42:44 ZEUS ntpd[1752]: receive: Unexpected origin timestamp 0xe6cc58d4.d0c2c422 does not match aorg 0000000000.00000000 from [email protected] xmt 0xe6cc58d4.901a8b6f Sep 14 09:42:45 ZEUS root: Sep 14 09:42:45 ZEUS root: ---------------Installation of DVB-Driver-Package successful---------------- Sep 14 09:42:45 ZEUS root: Sep 14 09:42:45 ZEUS elogind-daemon[1719]: Watching system buttons on /dev/input/event6 (Power Button) Sep 14 09:42:45 ZEUS elogind-daemon[1719]: Watching system buttons on /dev/input/event5 (Power Button) Sep 14 09:42:45 ZEUS elogind-daemon[1719]: Watching system buttons on /dev/input/event2 (Dell KB216 Wired Keyboard) Sep 14 09:42:45 ZEUS elogind-daemon[1719]: Watching system buttons on /dev/input/event3 (Dell KB216 Wired Keyboard System Control) Sep 14 09:42:45 ZEUS root: plugin: dvb-driver.plg installed ### [PREVIOUS LINE REPEATED 1 TIMES] ### -
On 7/3/2022 at 7:41 AM, Chunks said:
The plugin works ok for me if I disable snapshots. They used to work with snapshots as well until "recently"? I'm not sure what happened.
2022-07-03 02:00:01 information: able to perform snapshot for disk /mnt/user/domains/vmname/vdisk1.img on vmname. use_snapshots is 1. vm_state is running. vdisk_type is raw 2022-07-03 02:00:01 information: qemu agent found. enabling quiesce on snapshot. 2022-07-03 02:00:01 failure: snapshot command failed on vdisk1.snap for vmname. 2022-07-03 02:00:13 failure: snapshot_fallback is 0. skipping backup for vmname to prevent data loss. no cleanup will be performed for this vm. 2022-07-03 02:00:17 information: finished attempt to backup vmname to /mnt/disks/ssd1tb/vm_backups.
Not sure what happened.
I forgot to add the error from the actual logs. I'll attach them here since they're kinda long.
vmerror.txt 6.84 kB · 0 downloads
It seems like this is the issue,
error: unsupported configuration: external snapshot file for disk hdc already exists and is not a block device: /mnt/user/domains/vmname/vdisk1.snap
I'm not sure what exactly is causing this, but I wonder if you have tried to update VirtIO drivers? Also- how many backups do you have allowed for the VM? If it is only 1 backup- can you try 2?
-
On 5/25/2022 at 3:45 PM, PeteAsking said:
To convert a raw disk you just use the qemu-img command on a linux box eg:
qemu-img convert -p -c -O qcow2 originaldisk.qcow2 newdisk.qcow2
Resulting newdisk.qcow2 is in qcow format.
You can check with qemu-img info newdisk.qcow2
To build on this, you can also convert to and from RAW, VMDK/VHD/VHDX (HyperV), and VDI (Oracle Virtual Box).
Windows has a version of qemu-img as well. FYI, you may run into issues with boot partitions and other boot related items, these can be resolved obviously.
LOTS of qemu info at this link--> qemu-img commands and options
Spoiler -
On 11/17/2021 at 10:02 AM, ljm42 said:
Sorry to re-hash this and/or ask a dumb question here, but I'm not able to get this to work. I have 2 Unraid servers, and the one I need access to runs a pfSense VM, so obviously losing DNS causes an issue. I'd really like to keep it using SSL cert. I have tried https://ip but I get a ngix error, page not found after accepting warning.
In the linked info, I see this:
f Use SSL/TLS is set to Yes, then you can access your server using: https://[servername].[localTLD] or https://[servername].[localTLD]:<https_port> (if your https port is not the default of 443)
What exactly is [localTLD] ? Is there another way to access the server without turning off SSL? I have piHole docker(s), can I add my servers hashed address to that with the local IP?
-
On 4/1/2022 at 10:38 AM, writablevulture said:
You can choose specific servers by providing a comma-separated list of server IDs as an environment variable called "SERVERS" - I do this myself. Is that what you mean by locations? The documentation suggests you need to surround the list in parentheses but I find that this causes the container to fail.
Thanks. That's pretty helpful. I didn't see anything about that in the Docker Hub or Github. Maybe I missed it? Do you know where/how I can get a list of sever IDs?
-
On 1/4/2022 at 1:59 PM, bonienl said:
I am using the speedtest-tracker docker. It makes regular tests and keeps an overview of your internet performance.
I just happened to stumble on this post after noticing this plugin doesn't work.
WOW! Thanks for pointing it out! A great docker. I really like that it runs the automated scans. The only thing I could ask for is the ability to pick locations, but heck- it does pretty well as is.
Can this be added as an approved Unraid docker image? I had to add it from docker hub. Not sure what is involved with that, but this is certainly a valuable tool for others. -
4 hours ago, Squid said:
Not currently possible to separate things out, but it's on the drawing board.
By drawing board, do you mean the ability to create different backup configs (jobs)? Such as how the VM backup plugin works? That would seem like an easy approach since you could selectively include what apps you want in one backup vs. another.
I happen to use Plex and see the same huge files. I can pull the info I need when required, but I don't need to back that up as often as my other dockers.. An option for scheduled jobs would be awesome! -
How do you set this up for access to Unraid if you have SSH keys? (IE, remote access to Unraid..)
I'm not understanding what key goes where in the config or if I need a passphrase?Can I find the needed config items in /boot/config/ssh ?
-
Found my own solution...Went to Tools > System Devices
Found my card and bound all items to VFIO. Guess I missed this detail before.
-
17 hours ago, runamuk said:
I was hoping if anyone knew a possible way to have the Vdisk show as an SSD instead of HDD in Windows. With the recent windows update you can now run Android Apps native; however it required to have an SSD. Even though my Vdisk is stored on my cache drive so runs at SSD speeds it however will show as a HDD under windows due to the VirtIO drivers. Any recommendations would be great.
Perhaps this? You can pass a SSD through to the VM. I don't believe you can partition a cache drive in Unraid however.
-
I'm trying to pass an Nvidia NVIDIA GeForce GTX 1660 SUPER to my Windows 10 VM. I have a AMD Ryzen 9 5950X with 128 GB DDR4.
Latest BIOS. Motherboard info:
ASUSTeK COMPUTER INC. ROG STRIX X570-E GAMING WIFI II , Version Rev X.0x American Megatrends Inc., Version 4203 BIOS dated: Tue 08 Feb 2022 12:00:00 AM ESTEvery time I try to start the VM the VM icon starts spinning (red) and eventually crashes the GUI forcing me to do a powerdown command from SSH. Not optimal of course.
I have 2 cards. I am passing the other, a NVIDIA GeForce GTX 1660 Ti to my dockers. I am 1000% positive I am not using the docker graphic card with VM. I have disabled docker just to test that out...issue still happens. I have looked at the suggested AMD tweaks but I have no c-State settings or anything close to that. (From what I can see..) Motherboard manual below:
https://dlcdnets.asus.com/pub/ASUS/mb/SocketAM4/ROG_STRIX_X570-E_GAMING_WIFI_II/E19182_ROG_STRIX_X570-E_GAMING_WIFI_II_V2_UM_WEB.pdf
I have also tried passing the card I use for docker to VM (when docker disabled) and it still crashes Unraid.
Any suggestions? I saw in another video that @SpaceInvaderOne created a video card bios file in order to boot his VM. I hope that isn't the situation, seems like a ton of work to pass GPU.2 Diags from crashes attached.
Any ideas suggestions appreciated!
zeus-diagnostics-20220218-0019.zip zeus-diagnostics-20220218-1613.zip
-
22 minutes ago, Elmojo said:
I'd be happy to, but I have no idea how to access that file.
Do you need have a custom job for your backup? Can you try the default job?
-
35 minutes ago, Elmojo said:
For reference, the "default" job is disabled completely, both by selecting Enable Backups? to 'No' and by setting Backup Frequency to 'Disabled'.
Can you post your custom job file from /boot/config/plugins/vmbackup/Elmojo
-
13 hours ago, Twinkie0101 said:
Do I need to do this through another tool? Thanks for your help as I really want to understand how to handle this manually as you suggested.
I would highly suggest getting familiar with the command line, Unraid will be a much better experience!
You can access this from the top left tool-bar. Be careful! You are root when you do this.
Once you have that open, you can navigate around OR use something called Midnight Commander. You can launch it from the terminal by typing 'mc'. It is standard with Unraid and has a nice simple panel style GUI. Here is a brief guide on its use.
The best option in my opinion, IF you use Windows...is to use WinSCP. That can integrate with Putty, which will give you the same terminal access I explained above, PLUS Midnight Commander! I wouldn't use WinSCP for moving large amounts of data/files (Use MC!!!), but for a quick edit or moving a couple files it works perfectly and gives you the Windows explorer experience. You can assign a master password to WinSCP and save your credentials for any configured site, pretty handy! Doing that lets you save a single password for everything and it can even pass the credentials to your Putty session so you don't have to login (again) when launching that.
On top of all that- WinSCP (SSH really..) can save you if the Unraid gui should be become unavailable, you can still SSH in most times. This would allow you to troubleshoot and do a proper shutdown- possibly saving data loss or a parity re-sync.-
1
-
-
8 hours ago, Twinkie0101 said:
@PaulieORFI just set up the same backup for my HA. Curious on how you executed the restore option. I am curious how you handled the .fd file. Looking at the directions posted above (pinned), I don't see the etc/libvert.... folder (at least on my server). But the libvert entry is in my .xml file from the backup. Appreciate your insights.
You should definitely have that folder, it is in root folder of UNRAID. If you edit your VM config, change to XML view and look for this line-
<nvram>/etc/libvirt/qemu/nvram/*Your_FileName_Here_*VARS-pure-efi.fd></nvram>
You need to grab the VARS-pure-efi.fd file from your backup and place it where the XML has it listed. Don't forget to rename/remove the date/time stamp as noted in directions. There is a script listed above which may help you, but I would suggest understanding how to restore manually before using that just in case.
-
1 hour ago, Tiller said:
The only new error I saw was for trying to add the route with the new IP.
I changed the LAN_NETWORK setting to include both with a comma between them -- "192.168.1.0/24,192.168.4.0/38". The 1.0/24 address gets added as a route without issue, but the error for the 4.0/38 is obviously still there. And with both of them in the LAN_NETWORK setting, or either one individually, it doesn't matter. I still can't access the web UI.
I don't see any other errors that would explain it. There are some other errors/warnings, but they have seemingly always existed as they also show up in older logs when it was previously working.
It looks like you have vpn settings configured without it actually turned on via settings? See key1 in settings.
Are you running more than one network for Unraid? Can you set the docker to custom bridge for networking and manually assign it a static IP on the same network as your Unraid server? Also, try looking if it is http vs. https in the address. I've attached my config so you can see. -
1 minute ago, Tiller said:
I set up a new router and now I can't access the web UI for this Docker. Other containers still work -- Plex, Sonarr, and Radarr. But SABnzbd and qBittorrent are both broken at the moment. While watching Docker logs, it looks like it goes through the whole process and says listening on port 8080 at the end. But trying to connect to the web UI just times out and never loads. The only thing I have tried changing is the LAN_NETWORK setting in the config. My network ID changed from 192.168.1 to 192.168.4, so I changed LAN_NETWORK to 192.168.4.0/38 from 192.168.1.0/24. Is there something else I need to look at or change?
Look at the docker logs, it should be fairly clear what the issue is. Did you place your vpn file where required? (Conf/ovpn)
-
2 hours ago, Rocka374 said:
3. I have set my destination folder to "/mnt/disk1/backup1/" (where I want the backup to be generated).
@itimpi mentioned some important things, but I would also add that you shouldn't back up data to a specific disk, use the /mnt/user/ folder. (Don't use /mnt/user0 )
As always, @SpaceInvaderOne has a good video. It's for an older version of UNRAID, but is still accurate. -
7 hours ago, Elmojo said:
Odd news: it reported the error "cannot run default"
Umm...okay? Default is disabled, it's not supposed to run. Why am I getting this message now? I don't recall ever seeing it previously.
I believe you may be seeing that because you have "Enable Backups" marked as "NO". It looks like you manually ran it however, which is why you see the notification telling you it completed. Think of the warning more as a "Heads up, auto backups won't run".
-
17 minutes ago, Rocka374 said:
Can anyone share a noobie guide how to restore from a successful backup?
I have 3 files and I have no idea what to do with them.
I did a short guide a few posts up...
@mods...can this be pinned / sticky'd to the top of the thread? -
45 minutes ago, Elmojo said:
How do you use the plugin, if it doesn't shut down and restart running VMs?
If you set 'enable snapshots' to yes it will backup your VM after powering down and restore it back to the original state once completed. See the 'danger zone' tab of the plugin, you can see additional options including the 'restore to original state' and other shutdown/restart selections. The problems I have had with it doing the shutdown during backup were resolved by updating the VirtIO drivers. Also, you should find a logging file included in the destination directory even if it fails. Maybe post that so people can review.
Edit- my logs file for VM backup is here-->
/mnt/user/Backups/VM/Windows10/logs
Backup files are (for me) /mnt/user/Backups/VM/Windows10/Windows 10
[Plugin] DVB-Driver
in Plugin Support
Posted
Forgive me...maybe I'm being thick headed, how do I revert to that? I'm not seeing an option. Only stable, 6.11.0-rc4 and next, -rc5?