Dear dmacias
i have Gigabyte H77-DS3H with it8728f
when i write "sensors" i get this
Linux 3.4.26-unRAID.
root@server:~# sensors
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +35.0 C (high = +80.0 C, crit = +99.0 C)
Core 0: +34.0 C (high = +80.0 C, crit = +99.0 C)
Core 1: +34.0 C (high = +80.0 C, crit = +99.0 C)
Core 2: +32.0 C (high = +80.0 C, crit = +99.0 C)
Core 3: +27.0 C (high = +80.0 C, crit = +99.0 C)
it8728-isa-0a30
Adapter: ISA adapter
in0: +1.07 V (min = +0.00 V, max = +3.06 V)
in1: +2.05 V (min = +0.00 V, max = +3.06 V)
in2: +2.05 V (min = +0.00 V, max = +3.06 V)
in3: +2.02 V (min = +0.00 V, max = +3.06 V)
in4: +0.46 V (min = +0.00 V, max = +3.06 V)
in5: +0.88 V (min = +0.00 V, max = +3.06 V)
in6: +1.52 V (min = +0.00 V, max = +3.06 V)
3VSB: +3.36 V (min = +0.00 V, max = +6.12 V)
Vbat: +3.31 V
fan1: 1169 RPM (min = 10 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
temp1: +32.0 C (low = +127.0 C, high = +127.0 C) sensor = thermistor
temp2: +25.0 C (low = +127.0 C, high = +127.0 C) sensor = thermistor
temp3: +26.0 C (low = +0.0 C, high = +70.0 C) sensor = disabled
intrusion0: ALARM
when i write "sensors -u" i get this
root@server:~# sensors -u
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0:
temp1_input: 34.000
temp1_max: 80.000
temp1_crit: 99.000
temp1_crit_alarm: 0.000
Core 0:
temp2_input: 34.000
temp2_max: 80.000
temp2_crit: 99.000
temp2_crit_alarm: 0.000
Core 1:
temp3_input: 32.000
temp3_max: 80.000
temp3_crit: 99.000
temp3_crit_alarm: 0.000
Core 2:
temp4_input: 33.000
temp4_max: 80.000
temp4_crit: 99.000
temp4_crit_alarm: 0.000
Core 3:
temp5_input: 27.000
temp5_max: 80.000
temp5_crit: 99.000
temp5_crit_alarm: 0.000
it8728-isa-0a30
Adapter: ISA adapter
in0:
in0_input: 1.068
in0_min: 0.000
in0_max: 3.060
in0_alarm: 0.000
in0_beep: 0.000
in1:
in1_input: 2.052
in1_min: 0.000
in1_max: 3.060
in1_alarm: 0.000
in1_beep: 0.000
in2:
in2_input: 2.052
in2_min: 0.000
in2_max: 3.060
in2_alarm: 0.000
in2_beep: 0.000
in3:
in3_input: 2.016
in3_min: 0.000
in3_max: 3.060
in3_alarm: 0.000
in3_beep: 0.000
in4:
in4_input: 0.456
in4_min: 0.000
in4_max: 3.060
in4_alarm: 0.000
in4_beep: 0.000
in5:
in5_input: 0.876
in5_min: 0.000
in5_max: 3.060
in5_alarm: 0.000
in5_beep: 0.000
in6:
in6_input: 1.524
in6_min: 0.000
in6_max: 3.060
in6_alarm: 0.000
in6_beep: 0.000
3VSB:
in7_input: 3.360
in7_min: 0.000
in7_max: 6.120
in7_alarm: 0.000
in7_beep: 0.000
Vbat:
in8_input: 3.312
fan1:
fan1_input: 1169.000
fan1_min: 10.000
fan1_alarm: 0.000
fan1_beep: 1.000
fan2:
fan2_input: 0.000
fan2_min: 0.000
fan2_alarm: 0.000
fan2_beep: 1.000
fan3:
fan3_input: 0.000
fan3_min: 0.000
fan3_alarm: 0.000
fan3_beep: 1.000
fan4:
fan4_input: 0.000
fan4_min: 0.000
fan4_alarm: 0.000
fan4_beep: 1.000
fan5:
fan5_input: 0.000
fan5_min: 0.000
fan5_alarm: 0.000
fan5_beep: 1.000
temp1:
temp1_input: 31.000
temp1_max: 127.000
temp1_min: 127.000
temp1_alarm: 0.000
temp1_type: 4.000
temp1_beep: 1.000
temp2:
temp2_input: 25.000
temp2_max: 127.000
temp2_min: 127.000
temp2_alarm: 0.000
temp2_type: 4.000
temp2_beep: 1.000
temp3:
temp3_input: 25.000
temp3_max: 70.000
temp3_min: 0.000
temp3_alarm: 0.000
temp3_type: 0.000
temp3_beep: 1.000
intrusion0:
intrusion0_alarm: 1.000
root@server:~#
i created the folowing folders at the root folder of the flash drive
etc/sensor.d
then i put the sensors.conf in the sensor.d folder
my sensors.conf is
chip "it8728-*"
label in0 "Vtt"
set in0_min 1.02 # I'm liberal with these, 2-3% tops
set in0_max 1.08 # after that, cpu gets very unstable
ignore in1
# label in1 "+3.3V"
# set in1_min 3.14 # Some boards including GA-H67MA-UD2H
# set in1_max 3.47 # don't have 3.3V voltage reading
label in2 "+12V"
set in2_min 11.40 # according to ATX 12V PSU design guide
set in2_max 12.60 #
ignore in3 # reports 3VSB
ignore in4 # really don't know what's this one for
label in5 "Vcore"
set in5_min 0.65
set in5_max 1.50 # heavy o/c
label in6 "Vdram"
set in6_min 1.45 # adjust these, 1.35 for LVDDR3
set in6_max 1.55 # 1.5V is recommended, 1.65 tops
label in7 "3VSB"
set in7_min 3.14
set in7_max 3.47
label in8 "Vbat"
label fan1 "CPU fan"
set fan1_min 700
label fan2 "System fan"
set fan2_min 0
label temp1 "CPU Temp"
set temp1_min 10
set temp1_max 60 # seen those rising to 55C
label temp2 "MB Temp"
set temp2_min 10
set temp2_max 85
ignore temp3
compute in1 1.649*@,@/1.649 # multipliers provided by
compute in2 4.090*@,@/4.090 # Martin Malik author of hwinfo
i added this in my go file
#Update Sensors
cp /boot/custom/etc/sensors.d/sensors.conf /etc/sensors.d
modprobe it87
and still can not see the temp
i will appreciate it if you help me to show my temp in SF
thank you.