daan_SVK

if that's a response to my post then yes, I am aware. I specifically purchased Premiere to get the hardware transcoding working and it does not work on Binex's container. It does work without issues on the official EMBY container so I'm trying to figure out how to migrate the database over with all my watch statuses and user accounts.

Thank you very much, that indeed did the trick. I really appreciate you getting back to me on this one

sure, thank you. Here is the result: Command:root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker create --name='binhex-krusader1' --net='bridge' --privileged=true -e TZ="America/Los_Angeles" -e HOST_OS="Unraid" -e 'TEMP_FOLDER'='/config/krusader/tmp' -e 'WEBPAGE_TITLE'='Tower' -e 'VNC_PASSWORD'='' -e 'UMASK'='000' -e 'PUID'='99' -e 'PGID'='100' -p '6080:6080/tcp' -v '/mnt/':'/UNRAID':'rw' -v '/mnt/user/appdata/binhex-krusader':'/config':'rw' 'binhex/arch-krusader' 4644675e4d15681d5f6b4369181f68901462d46148bb71ee4a00804433b8462c The command finished successfully!

sure, thanks, that's the least I can do. tower-diagnostics-20200513-2043.zip

I did of course try that but Krusader doesn't do anything, no error, no pop up. I hit Delete, the dialog disappears and the folders stay in place.

hi there, so I copied couple of folders with Krusader into the appdata folder when I was troubleshooting a docker and now I can not delete them as I get Access denied. Any idea on how to resolve this? thanks you

hi everyone. what's the fastest way to migrate my setup from the binhex-emby container to the official emby container? I can't get transoding working on the binhex one and it apparently works fine on the official one. thank.

yup, basically followed the Spaceivader's video to the letter but transcoding with the binhex container doesn't seem to be working. No errors on the container log either. I just don't see the card at all.

does transoding work now in this container? I just purchased Emby premiere today and tried to set it up with a P2000 but I can't get the card to show up under 4.4.2.0.

is this just the consumer grade cards or the P series as well?

Ok, so after further research it turns out my UPS being the 120V SMT1500VA does not actually support firmware update with any of the APC tools and thus does not support MODBUS for any of the advanced features. So much for SMART UPS.

thanks for the quick response, that fixed it. I wasted two hours tracing this down last night. On another note, thanks a lot for all the work you're putting in. Can I buy you a beer?

would you mind writing down the steps on how to do this for them noobs like me?

thanks, according to that thread I might need to update firmware on my UPS. I will to that and report back.

Ok, so I finally got to check if it is plug in right and my UPS doesn't have surge protection only outlets. I also have the USB/RJ45, USB/RS232 and USB only cables and can not get the advanced stats from the UPS no matter what combination of settings I use so something else is wrong. Any other ideas anybody?

I will definitely check if this might be the case, I did indeed plug in mine by touch only as I don't have access to the back of the UPS myself. I really hope that's all that's to it. I will report back. Thanks for your reply.

hi guys, i have a smart APC Smart-UPS X 1500VA hooked up to my system and is is not reporting load properly as per below: As far as I know it is hooked up by the origianal USB cable. I did try the RS232 cable as well but would not even get the above info. when i run the apctest command i get this: root@Tower:~# apctest 2020-03-31 23:12:52 apctest 3.14.14 (31 May 2016) slackware Checking configuration ... sharenet.type = Network & ShareUPS Disabled cable.type = USB Cable mode.type = USB UPS Driver apctest FATAL ERROR in apctest.c at line 313 Unable to create UPS lock file. If apcupsd or apctest is already running, please stop it and run this program again. apctest error termination completed I have tried all the cable/protocol combinations i can think of but the best result is with the USB/USB combo which is what give me the above. i'd appreciate any help. thanks in advance

bump

hi there, I am looking for some input on an cache upgrade process. my cache drive is ruining btrfs and NetData started reporting issues with allocation. The server appears to be happy but I don't want to take any chances with attempting to repair the allocation issue so I decided to upgrade the cache drive with a cache pool. is my best option still to follow the wiki thread: https://wiki.unraid.net/index.php/Replace_A_Cache_Drive or should I be able to replace the current drive with a pool by adding second larger ssd, establishing a mirrored pool and then replacing original with another SSD that would be identical to the second one? If so: 1. can I change the filesystem on the second and third drive so I dont have? 2. is the pool going to automatically expand it self once the original drive is removed and replaced with the third (identical to the secon) thanks for your insight!

----------------- RESOLVED ----------------- hi there, I hate to be that guy, but I am really here. I was hoping my card would arrive in IT mode just like what others were lucky to get but no dice. I got SAS9210-8i with v7.39.02.00 BIOS and 20.00.07.00-IR firmware. I wasn't able to get into the UEFI shell on any of the systems that are available to me so I thought I check here before attempting again. is the 9210-8i identical to the 9211-8i? Would someone be able to confirm or point me to the files and steps I need for this card? thanks in advance. ----------------------- all done, this was actually stupid simple, i think i was just being over cautious. -----------------------

Love the ease of setup and how helpful the community is. Would love native sync feature for cloud storage services.

all sorted, thank you so much for your help. I ended up copying the config over to a fresh copy of 5.3, then just upgrading directly to the latest version. I, however don't trust this USB stick, so I'll be migrating the OS to a new one thanks again for all the help, this community truly is awesome!

ok, so I downloaded the latest version and set up the USB key from scratch, only replacing the CONFIG folder. the server now boots up, but I only get the banner from the GUI, nothing else

So do you think it is still worth to try to boot with append initrd=/bzroot root=/dev/sda1

I will do this next as I have 4 clean passes on memtest this morning. I didn't have the latest version running, when redoing the sticks, should I just download the newest version of Unraid? Sent from my ONEPLUS A6003 using Tapatalk