cpu2k6

I'm also interested. I have the USB Adapter QNA-UC5G1T. It shows up in System Devices but is not assigned as a network interface. Unraid 6.9.1

I have the same issue. It doesn't show "Next Page" or "Previous Page" Buttons anymore. Version 2020.08.22a

Hello, I'm new to unraid. I have a test System here, i have unraid 6.8.3 up and running. Hardware: MB: ASRock FM2A85X-ITX CPU: AMD A4-5300 APU with Radeon™ HD Graphics @ 3400 MHz RAM: 2x4GB DDR3 Storage: 3x3TB (one of those as Parity) Cache: 1x 500GB and 1x 256GB SSDs The problems I'm having are as follows: - Wake-On-LAN not working. - Slow Network speed. (about 500-600Mbit) Before Unraid, this system was running on Windows 10 and I had none of those problems. (Wake-On-LAN was working, speed about 850-900 Mbit) I noticed that the LEDs on the Ethernet Port are completely off when the system is turned off. In the Windows Setup, the LEDs kept blinking after shutdown. After a google search, I found out that the Ethernet Chip is an Realtek RTL8111. I found this Guide, how to change out the drive to the official Realtek driver, but apt-get is not used on unraid. The driver r8169 is the open-source one and the driver r8168 is the Realtek one. Using the command lspci -v confirms, that r8169 is used. 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06) Subsystem: ASRock Incorporation Motherboard (one of many) Flags: bus master, fast devsel, latency 0, IRQ 16 I/O ports at e000 [size=256] Memory at d0004000 (64-bit, prefetchable) [size=4K] Memory at d0000000 (64-bit, prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Endpoint, MSI 01 Capabilities: [b0] MSI-X: Enable+ Count=4 Masked- Capabilities: [d0] Vital Product Data Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Capabilities: [160] Device Serial Number Kernel driver in use: r8169 Kernel modules: r8169 So is there a way to change the driver on unraid so it uses the official Realtek driver (r8168)? Or is there an other way to fix the problems? Your help is much appreciated. Thanks, and greetings from Switzerland 🙂 cpu