daveo132
-
Posts
84 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by daveo132
-
-
I have no idea if I'm honest.
I did check it when it was running and the time had fixed itself. Not sure if part of the system is running so it was able to update off a timer server.
-
I just noticed that this thread seems to have a similar issue.
Would it be worth trying to delete the network config? -
townshend-hub-diagnostics-20210626-1707.zip
Ok it was my error. It had ran the diagnostics but for some strange reason the modified time was showing as hours out (like 9am this morning but it's 5pm for me)
Anyway they are now attached.
-
I've just ran the diagnostics again so hopefully it worked this time.
Yes i could see my flash drive as /boot
-
5 minutes ago, itimpi said:
When you log in at the console and use the ‘df’ command do you see the flash drive mounted as /boot ? If not then that would mean that the flash drive is not being found in the latef boot stages, and would also explain why diagnostics were not saved.
I was able to run and save the syslog.
Maybe I didn't run the diagnostics correctly? -
-
Hi all,
Today I made some updates to my server.
I've changed the motherboard / cpu / ram added a HBA and a GPU.
My understanding is that unRaid is hardware agnostic?
When I got the machine up and running again I could no longer access the GUI.
On the local machine I could log in but when the browser opens it just says that its unable to connect. It does have internet access, I was able to open google.
Array was not set to auto start.
I did run the diagnostics but they don't seem to have saved to the flash drive (despite saying the had).
I did have to remove the password (I didn't realise that the UI defaults the US keyboard layout so my UK password wouldn't work)
I deleted the files as show in this post,
On 10/7/2016 at 8:03 PM, limetech said:To reset password completely:
- Power off server.
- Plug flash into PC.
- Remove these files from the flash:
passwd
shadow
smbpasswd
You must delete all three. This will clear all passwords, but will also clear all users.
Any idea what going on?
-
@shiftylilbastrd thanks!
Will try this weekend
-
-
Oh i see!
Thanks, I will try that shortly.
-
Hi guys,
I'm a bit lost on this one.
I've got the docker setup and its report and IP address so all good there.
I've been trying to get my Firefox container to work through it but I can never access it at the ip/port number.
Have I missed something somewhere? It seemed pretty straight forward.
I've also checked "required Yes" to no help.
-
I think what I need to do next is figure out how to setup custom ips for some of my dockers.
Off to do some reading!
Thanks!
-
Sorry I think I removed some of the text I had in there.
I've set everything back to the default gateway (normal web / not VPN)
I can access via my phone.
-
25 minutes ago, ljm42 said:
OK, finally the problem
I see two options:
1) Setup Unraid to use your normal gateway. Then the www.hash.unraid.net DDNS will point at your router and the port forward will send the traffic to your server. This is the option we support.
2) Work with your VPN provider to forward port 4443 to your router. Then convince your router to push incoming VPN traffic on port 4443 to Unraid on port 4443. You might be able to get this working, but it is way out of scope for what I can help with.
Well I like to bury these issues!
I was going to say I didn't think it worked but I think it took a little while for things to update.
Works like a charm now. Thank you and sorry about that.
-
1 minute ago, ljm42 said:
Is this the actual Internet IP address for your router? Or is this this pointing at a VPN IP?
Its the VPN IP
-
Tried turning it off and on again 😆 that didn't work
Check fails as you expected.
Ping: yes this matches (i made sure that I put my laptop on the same gateway)
-
14 minutes ago, ljm42 said:
Sorry, there are a couple of ways to interpret this Can you provide updated screenshots of:
* the Settings -> Management Access page
* the Settings -> Management Access -> My Servers page
* the port forward setup in your router
What works and what doesn't?
* Local access to the webgui via https://hash.unraid.net:4443 ?
* Nextcloud via nextcloud.mysite.etc ?
* Remote Access to the webgui via https://www.hash.unraid.net:[WAN PORT] ?
Note that depending on how your router is setup, the Remote Access url may not work from inside your network (you need a specific feature called "hairpin NAT" for that to work.) So if you are testing Remote Access, try it from your phone when not on wifi.
Sure thing
What works and what doesn't?
* Local access to the webgui via https://hash.unraid.net:4443 ?
* Nextcloud via nextcloud.mysite.etc ?
* Remote Access to the webgui via https://www.hash.unraid.net:[WAN PORT] ?
Local access works fine at https://hash.unraid.net:4443/dasboard
Nextcloud all fine
No remote access, tried on phone on 4G, same result.
-
18 minutes ago, ljm42 said:
Sorry, this is confusing Every time I get close to understanding, I see another detail that doesn't match my mental model of what is going on.
So let's go back to basics: Like you are saying, it sounds like there is a conflict on port 443. You cannot have both Nextcloud and the Unraid webgui running on port 443 on the same IP address.
If Nextcloud is using port 443 on Unraid's main IP... you either need to adjust the Nextcloud docker to use something else or the Unraid webgui to use something else ( Settings -> Management Access -> HTTPS port). This is an internal port so it doesn't need to be obfuscated, something like 2443, 3443, 4443 would work fine.
Make the change, then adjust your port forwarding to match the change. When you are done you should not have port 443 as the destination port for two port forwards:
So....
I made everything 4443.
Both options in management access and the port forward is 4443 to 4443.
The port is open, checked.
Still no joy.
Just says "took too long to respond."
-
Ok,
I think I do have a conflict on 443.
I left everything overnight to ensure what I had working was working correctly (lots of test yesterday and it was late).
When I turned the Port Forward back on for My Server on 443 I could no longer access my nextcloud, turned that rule off and it works again.
-
8 hours ago, ljm42 said:
If there was a conflict on port 443 you probably wouldn't be able to take these screenshots.
What url are you using to generate these screenshots? (feel free to obfuscate your personal hash in the url)
Is Nextcloud working? What url are you using to access it?
I am not sure how to interpret this. For your initial tests you should put the PC and Unraid on the same network (and not directly connected to the Internet) so you can access Unraid and Nextcloud directly, without any kind of VPN software or port forwarding required.
Hi,
Thanks for the reply.
This is the url for the screen shots https://PERSONALHASH.unraid.net/Dashboard
If I type in the IP address of my server, this is where it sends me, note the missing port number.
Nextcloud is working perfectly and I am accessing it using its Web Address (ie. nextcloud.mysite.etc)
Sorry,
What I mean is that I use 2 gateways on my network.
I've set the default as the VPN Gateway and have rules setup that things like my desktop and laptop get routed directly to the WAN Gateway.
It allows me to run NordVPN on those machines (sometimes vpn connections cause more issues etc) so I can choose if I'm on a VPN or not.
Otherwise everything is on the same LAN, I don't use VLANs or multiple LANs at all.
I have tried setting all of that back to default (ie everything using the same Gateway) but it made no difference.
Hope that helps.
-
That being said.
Do I have a conflict here?
Nexcloud also uses these ports and was it just luck that it was working yesterday?
I'm no expert in Networking, learning as I go.
-
Hi,
I'm not sure if this is a bug or an issue on my side.
Yesterday this all worked fine for me but today not so.
Only change on my network was an update to my Pfsense but this was to fix the broken routing issues on the current release.
I can confirm that other forwarded ports (ie Nextcloud) work just fine but My Servers wont.
It is showing as Online in Myservers with Remote Access shown in green but will not connect.
Checking the port from the settings page in unraid also shows that is isn't reachable.
Any ideas?
My server sits behind an Open VPN connection while my PC has direct access to the net if that help?
I have also tried the api restart that has been mentioned to no effect.
and yes, I'm a follower of SpaceInvaderOne
-
that was it!
I didn't quite realize where I needed to add that custom option but I go there in the end.
Fingers crossed thats it now
- 1
-
ok that makes sense.
I tried adding the domain in pfsense but it didn't seem to take.
Disabling rebinding fixed the issue but that isn't a solution of course.
Saying that, I did re-enable the dns rebinding and i could still access the page. Not sure if I was too quick to try accessing the page again or something else.
I will keep playing with this throughout the day but at least I now know where the issue is!
Thanks for the help
[SOLVED] Unable to access GUI over network or at Local Machine
in General Support
Posted
I've not tried that, I don't know why it didn't occur to me.
I will try that in the morning and report back, (1am for me atm)