Claudio C

I create a VM with PopOS and added as Graphics Card the Nvidea as you can see below: But if I connect the monitor to the graphics card notting happen, do I forgot something ?

HI JorgeB, just to confirm that all works now. I created the second pool for the VM. Thank a lot for your help .... you are the best 🙂 Grazie Claudio

done root@Tower:~# btrfs balance start -dusage=90 /mnt/cache Done, had to relocate 42 out of 318 chunks Can I go on with these steps ? next steps are : 1. stop array 2. remove the device 3. Start the array 4. stop array create you pool 5. assign the disk to the new pool tower-diagnostics-20220518-1703.zip

Ok I execute this command Ibtrfs balance start -dusage=75 /mnt/cache outcome: Overall: Device size: 931.52GiB Device allocated: 931.52GiB Device unallocated: 3.02MiB Device missing: 0.00B Used: 593.10GiB Free (estimated): 166.57GiB (min: 166.57GiB) Free (statfs, df): 166.57GiB Data ratio: 2.00 Metadata ratio: 2.00 Global reserve: 154.06MiB (used: 0.00B) Multiple profiles: no Data Metadata System Id Path RAID1 RAID1 RAID1 Unallocated -- -------------- --------- --------- --------- ----------- 1 /dev/sdb1 462.70GiB 3.00GiB 64.00MiB 1.99MiB 2 /dev/nvme0n1p1 462.70GiB 3.00GiB 64.00MiB 1.02MiB -- -------------- --------- --------- --------- ----------- Total 462.70GiB 3.00GiB 64.00MiB 3.02MiB Used 296.12GiB 434.41MiB 112.00KiB next steps are : 1. stop array 2. remove the device 3. Start the array 4. stop array create you pool 5. assign the disk to the new pool is it this way ? attached the diagnostics. tower-diagnostics-20220518-1530.zip

It works :-)))) I'm so happy thanks a lot . now If I want to remove a disk from the pool and use it as dedicated pool for the VM what do I have to do ? tower-diagnostics-20220518-1320.zip

here the files tower-diagnostics-20220518-1121.zip

these are error that I have in log of cache disk: ay 18 06:32:50 Tower kernel: BTRFS error (device sdb1): devid 2 uuid b7a2b6e5-effb-48f3-8fbe-34b212a45d2c is missing May 18 06:32:50 Tower kernel: BTRFS error (device sdb1): failed to read the system array: -2 May 18 06:32:50 Tower kernel: BTRFS error (device sdb1): open_ctree failed May 18 06:32:50 Tower root: mount: /mnt/cache: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error. Do you think that I lost all cache data ?

Hi JorgeB do you have an idea how I can fix the issues ? thanks

here the files tower-diagnostics-20220517-2105.zip

Starting diagnostics collection... sh: -c: line 1: unexpected EOF while looking for matching `'' sh: -c: line 2: syntax error: unexpected end of file sh: -c: line 1: unexpected EOF while looking for matching `'' sh: -c: line 2: syntax error: unexpected end of file done. ZIP file '/boot/logs/tower-diagnostics-20220517-2105.zip' created.

ERROR: cannot access '/mnt/cache': No such file or directory

Now I have this error:

May 17 19:51:29 Tower kernel: BTRFS: error (device sdb1) in do_chunk_alloc:3467: errno=-28 No space left May 17 19:51:29 Tower kernel: BTRFS info (device sdb1): forced readonly

here the file syslog

root@Tower:~# diagnostics Starting diagnostics collection... No data , do you think that I can restart the server ?

My unraind is in this status "Array Starting•Mounting disks..." after that I removed a disk from a pool. I followed this guida https://wiki.unraid.net/Manual/Storage_Management#Removing_disks_from_a_multi-device_pool It is in this status from more than 4 hours. What can I do ? do I have to still waiting ?

I tried also with IP but nothing. This is my configuration

Hi all, I'm using wireguard as VPN service. I'm using Peer type of access: Remote access to LAN It works fine but I don't have access to the share folder (SMB). Could you help me ?

can someone help me with it?

Hi, I'm testing my speed network with libreSpeed and the dowload is worst than the upload as you can see in the print screen Could you help me to investigate ? Is it a problem of the librespeed or of my network ? Thanks

According to fix common problems: "Your server has run out of memory, and processes (potentially required) are being killed off. You should post your diagnostics and ask for assistance on the unRaid forums" Could you help me to identify and fix the issue ? tower-diagnostics-20210108-0534.zip

Hello, My routing table is this one: how can I reset this configuration to the defalt one ? if I tired to add the virbr0 I receive this error:

I did it with ubuntu and it works. One of the different that I found was this one: before: <driver name='qemu' type='raw' cache='writeback'/> after: <driver name='qemu' type='qcow2' cache='writeback'/> Now, I have to do the same with MacOS but in this case, I think that I have to change in the settings -> vm manager the "Default VM storage path:" with the path of my new SSD. Is it in this way ?

I tried to add more CPU but nothing. In the end, I tried creating a new vm using the same vDisk and it works. This sounds strange because the setting of the new vm is the same as the old one.