-
Posts
432 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by flyize
-
-
8 minutes ago, Dreeas said:
I also pulled the plug and built my first server a week ago:
https://pcpartpicker.com/user/dreeas/saved/#view=wkcYdC
I was also afraid I was going overkill as I usually do.
After playing with it for a few days I got a bit carried away and bought a RTX3060TI for the gaming VM I setup, and then the serverbuild wasn't overkill anymore.
Running about 20 dockers including Plex that uses the IGPU for 4K transcoding of very high bitrate files (70gb+), a win10 gaming vm and a Home assistant VM.Good call on not getting an Alder Lake. I'm still sitting here GPU transcoding until Unraid updates the Linux kernel so I can use the iGPU.
-
You've nailed it. That does seem to fix it.
However, you're correct in that I could just use the HDHR directly in Plex and then use xteve for the IPTV. Not sure why I didn't think of that.edit: Oh wait, I need xteve/guide2go for the xml guide for the hdhr. So I do need both in xteve.
-
So I got it all working, sorta. Thanks for your help.
I'm having an odd problem, and I'm wondering if it could be because something is missing from the container. No matter which buffer setting I use, either my IPTV or my HDHomeRun doesn't work. It goes like this:
- None: HDHomeRun works. IPTV does not (obviously no errors in log)
-
xTeVe: HDHomeRun works. IPTV error:
2022-01-31 16:33:13 [xTeVe] [ERROR] Streaming error (Server sends an incompatible content-type) - EC: 4003
-
FFMPEG: HDHomeRun works. IPTV error:
2022-01-31 16:35:04 [xTeVe] [ERROR] FFMPEG error (Streaming was stopped by third party transcoder (FFmpeg / VLC)) - EC: 1204
-
VLC: IPTV works. HDHomeRun error:
2022-01-31 16:36:01 [xTeVe] VLC log: [0000154f983afa30] vlcpulse audio output error: PulseAudio server connection failure: Connection refused
I filed a bug report over at xTeVe, but after thinking about it, I wanted to make sure that something wasn't missing from the container.
-
On 1/18/2022 at 9:34 AM, flyize said:
The sstvproxy docker doesn't seem to work at all. When I hit port 8098 I get an 'internal server error'.
Anyone else using sstvproxy successfully?
-
I added some echos and the errors are when it tries to update xteve. Apologies, are you aware of a good walkthrough on how to set this all up? I appreciate the help, but am probably really missing some basic stuff here.
-
2 minutes ago, alturismo said:
... there is not much todo from here may wrong SD user/pass ?
It appears to be getting data though. The .xml is 32MB.
-
Got it! As expected, this was user error. However, I still get a bit of an error at the end of running the cronjob.
2022/01/31 10:46:55 [G2G ] Deleted Program Informations: 0 Locked [423] Locked [423] <html><head><title>Unauthorized</title></head><body><h1>401 Unauthorized</h1></body></html>/
edit: And another question. When I attempt to setup xTeve its asking for an .m3u. Where does that come from?
-
Same error. I'm guessing it doesn't matter, but I'm actually running the command from inside the container.
/ # guide2go -configure /guide2go/tampa.yaml 2022/01/31 10:35:33 [G2G ] Version: 1.1.3 2022/01/31 10:35:33 [ERROR] open /guide2go/tampa.yaml: no such file or directory
Also, is there a better container to use. I saw the one with Owl doesn't have the Beta tag.
-
8 minutes ago, alturismo said:
may show your cronjob.sh part... looks like you missed something
Gesendet von meinem SM-G981B mit Tapatalk
You're correct. I totally have. Let me back up.
Based on the instructions listed with the container, if I go into the console and type
'guide2go -configure /guide2go/tampa.json' I get an error.
2022/01/31 10:24:55 [ERROR] open /guide2go/tampa.yaml: no such file or directory
Do I need to just create that folder?
-
So I'm trying to setup xteve_guide2go. I've created a config with 'guide2go -configure'. I then added a lineup and created the XMLTV file. I've got two issues:
* My Plex container doesn't see anything
* When I attempt to run './config/cronjob.sh' I get the following errors:
sed: /guide2go/CBLguide.yaml: No such file or directory sed: /guide2go/CBLguide.yaml: No such file or directory 2022/01/31 10:11:03 [G2G ] Version: 1.1.3 2022/01/31 10:11:03 [ERROR] open /guide2go/CBLguide.yaml: no such file or directory sed: /guide2go/SATguide.yaml: No such file or directory sed: /guide2go/SATguide.yaml: No such file or directory 2022/01/31 10:11:03 [G2G ] Version: 1.1.3 2022/01/31 10:11:03 [ERROR] open /guide2go/SATguide.yaml: no such file or directory sed: /guide2go/SATSport.yaml: No such file or directory sed: /guide2go/SATSport.yaml: No such file or directory 2022/01/31 10:11:03 [G2G ] Version: 1.1.3 2022/01/31 10:11:03 [ERROR] open /guide2go/SATSport.yaml: no such file or directory curl: (7) Failed to connect to 192.168.1.2 port 34400 after 3048 ms: Host is unreachable curl: (7) Failed to connect to 192.168.1.2 port 34400 after 2069 ms: Host is unreachable
-
7 minutes ago, ich777 said:
Please post your Diagnostics, what CPU are you using, without that nobody will be able to help.
Don't know if the Integrated Memory Controller Bus Utilization is that important to you... You can also disable it if you want to.
Apologies. I figured the answer would just be, yes.
Attached
-
Hopefully an easy one. Any ideas why my IMC Bus Utilization shows blank? Is that something that requires a discrete GPU?
-
On 1/17/2022 at 9:17 AM, flyize said:
So transcoding seems to be 'soft' crashing my server. It responds to pings but nothing else. syslog shows this:
Jan 16 16:39:12 Truffle kernel: i2c /dev entries driver Jan 16 17:10:06 Truffle kernel: i915 0000:00:02.0: [drm] Resetting vcs0 for preemption time out Jan 16 17:10:06 Truffle kernel: i915 0000:00:02.0: [drm] GPU HANG: ecode 12:4:28fffffd, in Plex Transcoder [8854]
Any ideas?
Anyone even got a guess as to what this could be?
I've recently upgrading the server hardware and am running 6.10.-rc2. Server works perfectly, as long as I don't turn on hardware transcoding in Plex. Also, I can't imagine that it matters, but I'm using binhex-plex.
-
The sstvproxy docker doesn't seem to work at all. When I hit port 8098 I get an 'internal server error'.
-
So transcoding seems to be 'soft' crashing my server. It responds to pings but nothing else. syslog shows this:
Jan 16 16:39:12 Truffle kernel: i2c /dev entries driver Jan 16 17:10:06 Truffle kernel: i915 0000:00:02.0: [drm] Resetting vcs0 for preemption time out Jan 16 17:10:06 Truffle kernel: i915 0000:00:02.0: [drm] GPU HANG: ecode 12:4:28fffffd, in Plex Transcoder [8854]
Any ideas?
-
I just got it all built yesterday. Last night and again this morning, the UI, all docker containers, and all VMs were unavailable. The server still responds to pings and the UI gives an NGINX error. Any ideas?
Running 6.10-rc3
-
2 hours ago, SimonF said:
As you are on rc2.
either add to syslinux
or add to i915.conf in modprobed.
options i915 force_probe=4680
or blacklist i915 and load intel gpu top as per this post.
Got it. Thanks!
I will inevitably forget about making these changes. Will this effect anything in the future?
-
On 11/9/2021 at 7:17 PM, Blobbonator said:
Just fyi - on my 12600k i can see using /dmesg
I will try it out with the suggestions in the message in the coming days but maybe alder lake needs an updated linux kernel we'll see
edit: tried to use "i915.force_probe=4680" but didn't work for me
Any chance you found a solution for this? FWIW, I'm running 6.10-rc2, but still the same issue.
[ 23.505832] i915 0000:00:02.0: Your graphics device 4680 is not properly supported by the driver in this
kernel version. To force driver probe anyway, use i915.force_probe=4680
module parameter or CONFIG_DRM_I915_FORCE_PROBE=4680 configuration option,
or (recommended) check for kernel updates. -
Oh, okay. That's great news. Thanks!
-
-
I recently picked up a new CPU and mobo for my Unraid server. I booted it up and can't connect. I see can't find eth0 in the logs. Is this motherboard actually not supported?
-
I'm reading over an older thread that mentions setting the minimum free space for the Cache in Global Share Settings, like this:
I don't have that UI at all. I'm running 6.10.0-rc2. Has it moved someplace else?
-
On 12/25/2021 at 3:44 PM, stevep94 said:
Hi all, Merry Christmas!
I'm hoping someone might be able to help - I tried to stream a film via Plex from my home unRAID server today and ran into a strange issue.
Basically I was at my parents house and could stream fine to my mobile app but when I logged into my account within the app on their smart TV, I kept getting a message saying my server was not available.
Obviously this was not the case because I could watch on my phone just fine - and it's not like it wasn't seeing the server, it came up with the right name but kept saying it was not online and to check it was connected to the internet and available!?!?
Now I'm home I can't see any settings within the UI that could make a difference - has anyone got any ideas??
I'm getting a few reports of this as well. A friend reported that it worked on one device, but not another. And my mother says she can't connect at all.
Did you ever find a solution?
edit: It's actually a side effect of this.
-
Sonarr is down. Apparently it's certificates are too old?
[v3.0.6.1342] System.Net.WebException: Error: TrustFailure (Authentication failed, see inner exception.): 'https://skyhook.sonarr.tv/v1/tvdb/shows/en/362829' ---> System.Net.WebException: Error: TrustFailure (Authentication failed, see inner exception.) ---> System.Security.Authentication.AuthenticationException: Authentication failed, see inner exception. ---> Mono.Btls.MonoBtlsException: Ssl error:1000007d:SSL routines:OPENSSL_internal:CERTIFICATE_VERIFY_FAILED
Created a github issue here:
[Support] alturismo - Repos
in Docker Containers
Posted
With pulseaudio they both work in VLC.
But what I think you're saying is that I can still get xteve to generate the hdhr xml, use the hdhr directly in Plex, and then point it to the xteve XML for guide data?