BenP511

Hi having successfully moved over to 10gbe network, my speed seems to be dropping from 1.10GBps to around 500-600MBps after a few GB of transfer on large files? cache drive is 500GB 970 EVO and should be more than capable of taking a 28GB file at the full speed. Any ideas? thanks server-diagnostics-20220116-1144.zip

Just as a follow up, incase anyone else has the same issue. In the end I had to dissemble the entire system end remove the wifi card under the IO shield. Most people with gigabyte aorus master z590 boards with this issue, might have todo the same. Let me know if update fixes this. Thanks Again.

Thanks for the speedy response! Tried modprobe -r btusb it removes it but then it emedietly readded it again? Z590 aorus master so no option to disable WiFi/bluetoothn the bios either, do you think removing the WiFi card will help? Last resort as it means disembling the server again!

hi I have just finished switching mother board to one that includes a 10g Eth port however I'm getting the same recurring error? any ideas? I have attach DIAG File Thanks in advance. server-diagnostics-20220113-2319.zip

Currently having the exact same issue thought I had messed up somewhere as I was only trying 4k movies and was only standard transcode no HW but then tried 1080p and thats hw transcoding... running i3 10100.... dont know where to go from here

Thank you! all sorted

Yeah nothing is flushing mover not invoked, cache is empty Thanks for the help

Hi still on trial for unraid all is great apart from transfer speeds to and from pc... which is obviously quite an issue. Both pc and server are wired via realtek 2.5Gbe to Netgear Nighthawk SX-10. Currently running the beta as its the only one to natively support the realtek lan I would expect over 100MBs reads on the network as my previous NAS netgear Readynas 214 handled it just fine and that was 1Gbe? I have attached some pictures and upload the diagnostics file, any help would be apricated before I take the plunge and buy UPDATE: Reading from the Cache is Fine 200+ MBs and little cpu use, but reading from the array spikes all the cores to near full and is slow around 66MBs server-diagnostics-20201031-1133.zip server-syslog-20201031-1200.zip