Leider habe ich das nächste Problem:
Ich habe die neue Festplatte eingebaut und als Parity Disk definiert. Danach die Parity-Synchronisation gestartet und direkt zu Beginn folgende Warnung erhalten:
Nachdem die Synchronisation durch war, kam eine weitere Warnung:
Der Smart Report spruckt folgendes aus:
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.19.107-Unraid] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red
Device Model: WDC WD40EFRX-68WT0N0
Serial Number: WD-WCC4E6YXXXXX
LU WWN Device Id: 5 0014ee 2b7353f9e
Firmware Version: 82.00A82
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Jan 15 05:44:32 2021 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: (52860) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 529) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x703d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 24
3 Spin_Up_Time POS--K 224 178 021 - 5758
4 Start_Stop_Count -O--CK 085 085 000 - 15919
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 100 253 000 - 0
9 Power_On_Hours -O--CK 042 042 000 - 42510
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 30
192 Power-Off_Retract_Count -O--CK 200 200 000 - 24
193 Load_Cycle_Count -O--CK 194 194 000 - 20589
194 Temperature_Celsius -O---K 121 108 000 - 31
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 5
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 11
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb6 GPL,SL VS 1 Device vendor specific log
0xb7 GPL,SL VS 39 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 5
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 5 [4] occurred at disk power-on lifetime: 42510 hours (1771 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 01 d1 1a 1d 78 40 00 Error: UNC at LBA = 0x1d11a1d78 = 7803116920
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 05 40 00 f8 00 01 d1 1a 32 f0 40 08 09:42:15.022 READ FPDMA QUEUED
60 05 40 00 10 00 01 d1 1a 18 30 40 08 09:42:15.022 READ FPDMA QUEUED
60 05 40 00 08 00 01 d1 1a 1d 70 40 08 09:42:15.021 READ FPDMA QUEUED
60 00 10 00 00 00 01 d1 1a 22 b0 40 08 09:42:15.021 READ FPDMA QUEUED
60 00 e8 00 f0 00 01 d1 1a 22 c0 40 08 09:42:15.021 READ FPDMA QUEUED
Error 4 [3] occurred at disk power-on lifetime: 42510 hours (1771 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 01 d1 1a 17 50 40 00 Error: UNC at LBA = 0x1d11a1750 = 7803115344
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 05 40 00 40 00 01 d1 1a 12 f0 40 08 09:42:11.652 READ FPDMA QUEUED
60 02 d0 00 38 00 01 d1 1a 10 20 40 08 09:42:11.641 READ FPDMA QUEUED
60 00 78 00 30 00 01 d1 1a 0f a8 40 08 09:42:11.635 READ FPDMA QUEUED
60 01 30 00 28 00 01 d1 1a 0e 78 40 08 09:42:11.634 READ FPDMA QUEUED
60 01 48 00 20 00 01 d1 1a 0d 30 40 08 09:42:11.632 READ FPDMA QUEUED
Error 3 [2] occurred at disk power-on lifetime: 42500 hours (1770 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 b3 d9 08 40 00 Error: UNC at LBA = 0x00b3d908 = 11786504
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 05 40 00 f0 00 00 00 b3 f4 50 40 08 00:06:45.954 READ FPDMA QUEUED
60 00 80 00 e8 00 00 00 b3 f3 d0 40 08 00:06:44.996 READ FPDMA QUEUED
60 03 d0 00 e0 00 00 00 b3 f0 00 40 08 00:06:44.996 READ FPDMA QUEUED
60 00 f0 00 d8 00 00 00 b3 ef 10 40 08 00:06:43.418 READ FPDMA QUEUED
60 04 50 00 d0 00 00 00 b3 ea c0 40 08 00:06:43.418 READ FPDMA QUEUED
Error 2 [1] occurred at disk power-on lifetime: 42500 hours (1770 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 b3 cb b0 40 00 Error: UNC at LBA = 0x00b3cbb0 = 11783088
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 03 d0 00 10 00 00 00 b3 db f0 40 08 00:06:39.246 READ FPDMA QUEUED
60 01 70 00 08 00 00 00 b3 da 80 40 08 00:06:39.245 READ FPDMA QUEUED
60 05 40 00 80 00 00 00 b3 d5 40 40 08 00:06:39.245 READ FPDMA QUEUED
60 00 80 00 78 00 00 00 b3 bf c0 40 08 00:06:39.245 READ FPDMA QUEUED
60 05 40 00 70 00 00 00 b3 c0 40 40 08 00:06:39.245 READ FPDMA QUEUED
Error 1 [0] occurred at disk power-on lifetime: 42500 hours (1770 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 b3 be 50 40 00 Error: UNC at LBA = 0x00b3be50 = 11779664
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 04 c8 00 f0 00 00 00 b3 d0 78 40 08 00:06:35.703 READ FPDMA QUEUED
60 00 78 00 e8 00 00 00 b3 d0 00 40 08 00:06:35.699 READ FPDMA QUEUED
60 05 40 00 e0 00 00 00 b3 ca c0 40 08 00:06:35.699 READ FPDMA QUEUED
60 03 c0 00 d8 00 00 00 b3 c7 00 40 08 00:06:35.695 READ FPDMA QUEUED
60 00 a0 00 d0 00 00 00 b3 c6 60 40 08 00:06:35.695 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 42510 11783088
# 2 Short offline Completed without error 00% 42510 -
# 3 Short offline Aborted by host 10% 42500 -
# 4 Short offline Completed without error 00% 42313 -
# 5 Short offline Completed without error 00% 42145 -
# 6 Short offline Completed without error 00% 41978 -
# 7 Short offline Completed without error 00% 41810 -
# 8 Extended offline Completed: read failure 10% 41718 7803115344
# 9 Short offline Completed without error 00% 41642 -
#10 Short offline Completed without error 00% 41474 -
#11 Short offline Completed without error 00% 41306 -
#12 Short offline Completed without error 00% 41138 -
#13 Extended offline Completed: read failure 10% 40997 7803115344
#14 Short offline Completed without error 00% 40970 -
#15 Short offline Completed without error 00% 40803 -
#16 Short offline Completed without error 00% 40634 -
#17 Short offline Completed without error 00% 40466 -
#18 Short offline Completed without error 00% 40298 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 31 Celsius
Power Cycle Min/Max Temperature: 29/32 Celsius
Lifetime Min/Max Temperature: 3/44 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (449)
Index Estimated Time Temperature Celsius
450 2021-01-14 21:47 32 *************
... ..( 29 skipped). .. *************
2 2021-01-14 22:17 32 *************
3 2021-01-14 22:18 31 ************
... ..( 5 skipped). .. ************
9 2021-01-14 22:24 31 ************
10 2021-01-14 22:25 32 *************
... ..(438 skipped). .. *************
449 2021-01-15 05:44 32 *************
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 35480 Vendor specific
In den Attributes ist Zeile 197 gelb:
Ist die Festplatte irgendwie zu retten?
Danke vorab!