AmokK

Same here, been using powertop for a month, all good in tunables, I think I checked all possible options in bios, but I still get 0% in every Pkg(Hw) values.

I don't know if it's really the solution, but I switched my cache pool (two NVMe SSDs) from ZFS to btrfs, and it's been rock solid for a week, and going on !

Ok, that's a start, it will be long and painful, but at least I could pinpoint the problem, thanks for your help !

Switched to ipvlan for a few hours, froze again. Last syslog entries : Jul 11 15:25:02 Tower emhttpd: read SMART /dev/sdc Jul 11 15:27:23 Tower kernel: mdcmd (47): set md_write_method 1 Jul 11 15:27:23 Tower kernel: Jul 11 15:40:12 Tower emhttpd: spinning down /dev/sdc Jul 11 15:42:23 Tower kernel: mdcmd (48): set md_write_method 0 Jul 11 15:42:23 Tower kernel:

Ok ! I don't know the difference between macvlan and ipvlan, but I will try this, that's something ! Thanks for your insight

Is it this one, mirrored to flash drive ? syslog

Hi ! My unraid server freezes about every two days (randomly), I can't access web interface, shares or dockers. It won't power down then when I press the physical power button, so I have to shut the power down to power it again. I recently changed motherboard/cpu/ram/ssds, memtest runs all night without error. I mirrored syslog to flash, last time it froze, latest entry was an array spin down (2 HDDs). This morning it seems last entry was dynamix cache dirs plugin execution (I disabled it now). Any help appreciated. Thanks !! tower-diagnostics-20230711-0814.zip

Same kind of errors here on unraid 6.12.1 : root@Tower:~# powertop --quiet --auto-tune powertop: /lib64/libncursesw.so.6: no version information available (required by powertop) powertop: /lib64/libtinfo.so.6: no version information available (required by powertop) Cannot load from file /var/cache/powertop/saved_parameters.powertop File will be loaded after taking minimum number of measurement(s) with battery only Cannot load from file /var/cache/powertop/saved_parameters.powertop File will be loaded after taking minimum number of measurement(s) with battery only root@Tower:~# What's wrong ? Every (many) lines that are reported as "bad" in tunables, turn to "good" when using autotune command, but if I check later, all is back to their original "bad" status.

Hi ! I updated to nextcloud 25.0.3, and I have some new warnings (I already had some for monthes, about security-headers and policies, and also reverse proxy, but don't have the skills yet to fix them) regarding the apps folder permissions, it says that the owner is different from the web server user. I think it could be fixed with a little bit of chmod, but what is the default web server username ? in nextcloud docs, it is often "www-data", is that the case here ?

My database is indeed named "nextclouddb". What command should I use then?

Hi ! I have a big file in the root folder of duplicati, about 7 Gb, what is it ? Is it safe to delete ? https://ibb.co/myqRjFs

@jj9987 Thanks ! I'm not very confident with command lines, sorry if I make beginner mistakes So I tried this : / # pg_dump -U nextcloud -s > /var/lib/postgresql/data/bak.sql pg_dump: error: connection to database "nextcloud" failed: FATAL: database "nextcloud" does not exist I don't know how the command arguments work, but it seems I'm not using it correctly ! "-U" is for username (nextcloud) but the command seems to understand "nextcloud" database, and skips the username part ?

@CryPt00n Thanks for the detailed answer ! First, I was referring to adminer not to use it to backup/migrate, but to point out that database and credentials are valid, as it can be accessed by adminer. I tried your method, but when trying to backup database in source container, i get this error : / # pg_dumpall -U nextcloud -s > /var/lib/postgresql/data/bak.sql pg_dumpall: error: query failed: ERROR: permission denied for table pg_authid pg_dumpall: error: query was: SELECT oid, rolname, rolsuper, rolinherit, rolcreaterole, rolcreatedb, rolcanlogin, rolconnlimit, rolpassword, rolvaliduntil, rolreplication, rolbypassrls, pg_catalog.shobj_description(oid, 'pg_authid') as rolcomment, rolname = current_user AS is_current_user FROM pg_authid WHERE rolname !~ '^pg_' ORDER BY 2 Nextcloud db user is really "nextcloud", no error on that, like I said, database is accessed by the same user by adminer with no problem, and I can see all entries. I don't know what I did wrong in my setup to end up with this result

Currently running PostgresQL 13.9 for nextcloud database, I would like to upgrade to PostgresQL 15.1, but I'm struggling with theses commands, what is the exact syntax to use ? (I'm running command in PostgresQL container console) My database is named "nextclouddb", I can access it using adminer.

Thanks, I know, I messed up my code paste, I only use the standard command

root@Tower:~# docker exec -it nextcloud sudo -u abc php -f /config/www/nextcloud/cron.php root@Tower:~# docker exec -it nextcloud sudo -u abc php -f /config/www/nextcloud/cron.php -vv PHP 7.4.26 (cli) (built: Nov 18 2021 21:39:13) ( NTS ) Copyright (c) The PHP Group Zend Engine v3.4.0, Copyright (c) Zend Technologies with Zend OPcache v7.4.26, Copyright (c), by Zend Technologies No error at least !

So I tried the commands : docker exec -it nextcloud sudo -u abc php -f /config/www/nextcloud/cron.php docker exec -it nextcloud sudo -u abc php -f /config/www/nextcloud/cron.php -vv like @andreidelait advised, and it seems to work fine, no errors, it runs. I created a script to use it regularly. In my nextcloud instance, it still reports no cron jobs have been running for 29 days, is it supposed to be aware an external script is running ?

Thanks for your input. In my case, I never set up anything relative to cron, I even never heard of it before it started to get errors I just thought it was part of the nextcloud container, as an internal routine or so ... I'll try to make it work like you did !

Updated to nextcloud 24.0.6 (both instance and docker container), still having cron jobs not working / something went wrong, for 21 days now. Can someone help me diagnose or fix this ? As nextcloud seems to work fine, is it a serious problem ?

Hi ! I'm having an issue with my Nextcloud 24 instance, I get a "something went wrong" in the background tasks, that is 7 days old. It runs on default setting "Cron", i tried to switch to Webcron, to test if it got better, but it switches back automatically to Cron a few minutes later. What can I do to solve this problem ?

I'm surely missing something, how to switch from old and deprecated scrutiny to analogj image ? Just tried to install a fresh analogj, can't get in webui, template seems way different than the deprecated one ... refers to "influxdb" for example, don't know what it is.

Thanks for the great work, and the guide in OP, manual update let me upgrade from 21.0.5 to 21.0.7, and then 22.2.3

Same problem here, even when choosing script v0.3.4, nothing happens, test is blank with 0 Mb/s results.

Thank you for pointing me in the right direction

Thank you for your answer, I understand now why it can't work automatically, as it is a major postgres update. I will stick to the 13.4 version for the moment, as the database upgrade procedure seems a little bit complicated, but I will study it thoroughly and try it later