Richy1989

A bridge for Signal and Matrix. Requirements Docker A Matrix homeserver that supports application services (e.g. Synapse) You need access to register an appservice, which usually involves editing the homeserver config file. A Signal client that can add linked devices (both official mobile apps and some unofficial clients like signal-cli work). Initial Bridge Config Help: https://docs.mau.fi/bridges/general/initial-config.html Authentication Help: https://docs.mau.fi/bridges/go/signal/authentication.html

Hello, This is the support thread for Matrix Sliding Sync. Run a sliding sync proxy. An implementation of MSC3575. The Github page of Sliding Sync should provide all the information needed to set this up correctly. https://github.com/matrix-org/sliding-sync NOTE: The proxy works fine with Dendrite and Synapse, but it doesn't work well with Conduit due to spec violations in the state of a room in /sync. Running the proxy with Conduit will cause more expired connections (HTTP 400s) when room state changes, and log lines like WRN Accumulator.filterToNewTimelineEvents: seen the same event ID twice, ignoring. NOTE: Requires Postgres 13+.

Can't believe it, the old turn it off and on again Yes this worked. Thanks you very much! You made my day. Have a great weekend!

Hello, i have a cache pool set up with only one device. I use this to send ZFS Snapshots to the Array. At one point I added a mirror device to the pool, mirrored the data and then removed the old device since it was smaller than the new one. This worked pretty well. In the command line everything is ok, it shows me a pool with 1 device: pool: cache state: ONLINE scan: scrub repaired 0B in 00:01:02 with 0 errors on Thu Mar 14 21:02:19 2024 config: NAME STATE READ WRITE CKSUM cache ONLINE 0 0 0 nvme1n1p1 ONLINE 0 0 0 However the Unraid GUI has another opinion. First of all i cannot tell it that it is a 1 device pool, and then it added a 3rd device, see the screenshots below. Why are there 3 devices, and why can't I remove tell the Unraid that only 1 device is in this pool. Can somebody tell me what I am doing wrong? Would really appreciate some help. Thanks so much. Best Regards!

Hey navigat0, did you find a soloution? Do you know what you problem was back then? I seem to have the same problem right now. Thanks for the help! Best Regards

Hey, Does this Plugin still work if all Appdata Folder are ZFS Datasets? Thanks for the Help! BR

Hello, my Unraid System (6.12.0-rc5) freezes randomly. And I am not able to find / fix it. Most likely it happed at that section of the Syslog: May 11 22:07:15 Tower emhttpd: read SMART /dev/sdb May 11 22:10:46 Tower kernel: general protection fault, probably for non-canonical address 0xffff1116aeaf2f90: 0000 [#1] PREEMPT SMP NOPTI May 11 22:10:46 Tower kernel: CPU: 14 PID: 86 Comm: ksoftirqd/14 Tainted: P S W O 6.1.27-Unraid #1 May 11 22:10:46 Tower kernel: Hardware name: To Be Filled By O.E.M. X570 Pro4/X570 Pro4, BIOS P5.01 01/18/2023 May 11 22:10:46 Tower kernel: RIP: 0010:percpu_ref_get_many+0x1f/0x2a May 11 22:10:46 Tower kernel: Code: 0b 48 89 d8 5b 5d c3 cc cc cc cc 55 48 89 fd 53 48 89 f3 e8 10 38 ea ff 48 8b 45 00 a8 03 74 0a 48 8b 45 08 f0 48 01 18 eb 04 <65> 48 01 18 5b 5d e9 07 85 ea ff f6 47 54 01 75 0b 48 83 c7 10 be May 11 22:10:46 Tower kernel: RSP: 0018:ffffc900004afd08 EFLAGS: 00010046 May 11 22:10:46 Tower kernel: RAX: ffff8886b0772f90 RBX: 0000000000000001 RCX: 0000000000000000 May 11 22:10:46 Tower kernel: RDX: ffff888100c33f00 RSI: 0000000000000001 RDI: ffff88817d5bbd88 May 11 22:10:46 Tower kernel: RBP: ffff88817d5bbd88 R08: ffff8887cfa7d8c0 R09: ffffffff810d6f6f May 11 22:10:46 Tower kernel: R10: ffff8887cfa7d8c0 R11: 0000000000032080 R12: ffff88817d5bbd88 May 11 22:10:46 Tower kernel: R13: 0000000000000206 R14: ffff8881865bb500 R15: 00000000fffffff8 May 11 22:10:46 Tower kernel: FS: 0000000000000000(0000) GS:ffff888ffe380000(0000) knlGS:0000000000000000 May 11 22:10:46 Tower kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 May 11 22:14:59 Tower nmbd[1776]: [2023/05/11 22:14:59.083053, 0] ../../source3/nmbd/nmbd_become_lmb.c:398(become_local_master_stage2) May 11 22:14:59 Tower nmbd[1776]: ***** May 11 22:14:59 Tower nmbd[1776]: May 11 22:14:59 Tower nmbd[1776]: Samba name server TOWER is now a local master browser for workgroup WORKGROUP on subnet 192.168.0.246 May 11 22:14:59 Tower nmbd[1776]: May 11 22:14:59 Tower nmbd[1776]: ***** May 11 22:14:59 Tower rsyslogd: action 'action-2-builtin:omfwd' resumed (module 'builtin:omfwd') [v8.2102.0 try https://www.rsyslog.com/e/2359 ] Hardware: ASRock X570 Pro4 (most recent Bios Version) AMD Ryzen 7 5700G with Radeon Graphics @ 3800 MHz NVIDIA GeForce GTX 1070 I have the "/usr/local/sbin/zenstates --c6-disable" in the go file. Maybe somebody has a better understanding of the syslog file as I do. I really would appreciate any kind of help! Thank you very much! Best Regards, Richard

Hello Guys, has anyone ever tried to route Jellyfin (binhex-jellyfin) though binhex-privoxyvpn ? I can't get the web UI working. I set all the setting accordingly. Change Network of Jellyfin to "none", added the Extra Parameter "--net=container:binhex-privoxyvpn" In privoxyvpn I added the port 8096 (Host and Container Port) and added the same port into the "VPN_INPUT_PORTS" list. It won't work. Maybe somebody here has an idea. Thank you very much in advance! Best Regards