joshrp5

So I will be starting from scratch and would like to halfway identify how it happened. I assume my root pw wasn’t strong enough and they ssh into it? also, should I build the array with zfs so I can do snapshots?

Right, like a duplicate, not some sort of snapshot

When you say restoring from a backup, you don’t mean the flash drive backup do you? I am assuming all the data is gone otherwise. Had about 120TB of data

Yes. The server is available from the internet. It is connect to Unraid connect plugin and has ngnix installed for reverse proxy. using unifi network for my firewall, etc. Crafty was installed and ngnix are about the only ports open. my the most I have prior to rebooting is what I posted originally. I wish I didn’t reboot, as I assumed it was being backed up, which is was to the array.

so this is diag as of now, but it shouldn't be much different than before. No xmrig installed or crypto miner, I mean I may have 3 years ago, but I don't think so. Definitely nothing in plugins or dockers or anything as I keep those pretty clean. jpserver-diagnostics-20250103-0133 2.zip

I rebooted in safe mode and xfs_repair on all drives. Still the same issue. what seems odd is from the gui all drives are basically empty. If I open each drive to see contents, they also look empty. A delete would take hours to occur and it’s like I can’t find a trail.

So I was watching a movie, then 1 hour later come back and video was missing. so I logged into unraid and all my drives are basically blank. I think I have 16 with about 8 different shares. Almost all the shares are empty. Appdata mostly empty. So I am wondering where to go from here. No one has access to shares even remotely. The only thing that has changed in the past week was I mounted an external share with plugins, and then had a docker use it. I thought I read somewhere that my shares could have been mounted wrong, like wrong mount point? I have been using unraid for about 5 years or so, I am familiar with it, but not super technical. don't know if this is a hack of some sort or a technical problem. I have rebooted the server but was able to look as some logs prior. I have since ran xfs_repair. kernel: xmrig[63657]: segfault at 1d93c0 ip 000014fbaeb1a266 sp 000014fbb0d68118 error 4 in libc.so.6[14fbaeb09000+15b000] likely on CPU 48 (core 0, socket 1) kernel: xmrig[1269]: segfault at 1d93c0 ip 000014b25ca10266 sp 000014b25ec5e118 error 4 in libc.so.6[14b25c9ff000+15b000] likely on CPU 38 (core 6, socket 0) Jan 2 22:15:37 kernel: XFS (md3p1): Metadata corruption detected at xfs_dinode_verify+0xa0/0x732 [xfs], inode 0x104c17872 dinode Jan 2 22:15:37 kernel: XFS (md3p1): Unmount and run xfs_repair Jan 2 22:15:37 kernel: XFS (md3p1): First 128 bytes of corrupted metadata buffer: Jan 2 22:15:37 kernel: 00000000: 49 4e 41 ff 03 01 00 00 00 00 00 63 00 00 00 64 INA........c...d Jan 2 22:15:37 kernel: 00000010: 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 ................ Jan 2 22:15:37 kernel: 00000020: 61 1d 9d 97 00 74 b7 9a 61 1d e2 15 0f 9d cb 5f a....t..a......_ Jan 2 22:15:37 kernel: 00000030: 64 4e ab 35 2c f4 23 23 00 00 00 00 00 00 00 0a dN.5,.##........ Jan 2 22:15:37 kernel: 00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Jan 2 22:15:37 kernel: 00000050: 00 00 24 01 00 00 00 00 00 00 00 00 4f 40 66 bc ..$.........O@f. Jan 2 22:15:37 kernel: 00000060: ff ff ff ff f2 6b aa 6a 00 00 00 00 00 00 00 10 .....k.j........ Jan 2 22:15:37 kernel: 00000070: 00 00 00 01 00 3d b4 57 00 00 00 00 00 00 00 00 .....=.W........ Jan 2 22:17:35 shfs: /usr/sbin/zfs unmount 'cache/Temp' 2>&1 jpserver-diagnostics-20250103-0133.zip

I now have 3 p440 cards in HBA mode, but the last one’s doesn’t seem to want to show lights, it also has my 2 ssd cache pool and seems to run very slowly.

I have used the suggested /mnt but my two cache pools /mnt/cache & /mnt/ssd both still show the docker mount error. Well one of the 2 from each pool says part of a pool and the other says docker isn't mounted.

I am still running into issues, on 6.11.5. client machine is M1 Max studio (Ventura) with 10gbe to switch to server. I have entered all the smb settings from the two posts and still when I access a folder with lots of files or folders, the Mac basically network stalls.

Is there a way to enable my hdd lights? Because of the onboard raid card not being able to fully go to HBA mode, I have had to use 3 LSI cards for my 24 drives. However, now, there aren't any lights on the front. is there a way to enable them? Also, is there any specific apps that I should use for my specific hardware? thanks