T_Matz

I agree, it think it was a left over setting when i had the system set up as my daily driver and not running as a server.

I believe the bios "AI Optomized" settings were creating an unsafe overclock. I tested the system with the setting off and have had zero issues. It seems the AI setting in the bios were stating my cooling options were more than what i had, and were boosting the CPU frequencies very high and creating unsafe temps.

I am having an issue with the CROWDSEC docker. No matter what I do I can not get into the WEBUI of the docker. I have another docker utilizing 8080 so i changed the port to 8082 and a few other variations and it to open. I currently have a few dockers reverse proxied to a cloudflare domain, and wanted to also install TRAEFIK should I install this before getting CROWDSEC up and working or does it even matter? I appreciate all the help!

I had some spare time and set up NPM and omg that was so much easier! its up and working now thank you for the help getting this up and working!

I will work do these updates this weekend and get back to you if it works. Thank you for the assistance

Quick update, so I went back into the bios after work and went to the EZ mode and noticed "AI overclock" was enabled. I disabled it and the system seemed to run stable but was only at 3600mhz instead of what is normal for 4900-5200mhz. so I decided to triy a photo prisim index and the system did not lock up. So either you were correct that there was a thermal issue and the system froze or the intel turbo was just unstable. I'm still going to repaste and do a prime 95 testing. I will update again later

Sounds good, going to do that over the weekend. Since I'm doing that work I'll repaste the CPU while I'm at it and report back after.

I had to change the ports 80/443 because it was creating a conflict with another device on my network or at least i believe that was the issue. It was also utilizing 80 and 443, when i was doing port forwarding originally to port 80 and 443 it was going to the other device and not to unraid. After i changed the ports to 81 and 443 and updated the port forwarding i was getting the 500 errors and not the other device. I didnt remove the email field i just blacked it out on this docker its labeled CF_user. I will try to set up NGINX proxy manager and get back to you. I appreciate the help!

I dont believe so, but my plan is to plug in an unused hard drive with windows 10 on it and run prime 95 to really test the CPU and cooling to see whats going on with temps and the CPU. It really seem like the only culprit, everything else has been tested and seems to be working correctly. The CPU is a 12700k, cooler is a Noctua NH-U12S. Should i disconnect my other hard drives used for unraid before doing this? I will watch the temps on the CPU and ive never seen it go above 70c even during those max loads. The CPU on the unraid dashboard just shows very unusual behavior during those tasks described above. Normally my cpu sits around 4-8% load with a temp of 28-32c but when i do those tasks all or most of the CPU cores will sit at 80-100% even the ones that I have isolated for VMs. The server becomes sluggish, if you are watching anything on plex at that time will buffer constantly and then the whole server will lock up shortly after.

but if i just let the system run and dont have it do any intensive task and only download 1 movie or show at a time the system will remain stable for days without issue

yes i did this. I booted into safe mode and slowly brought services online. The system will remain stable if i just let it run but if I try to do any intensive task it crashes. For instance i had sonarr que 60 episodes for download and it crashed. I was having photo prisim index photos and the system crashed. had radarr que movies for download and it crashed.

I downloaded MemTest 86 v10.6 and ran my memory through numerous passes and not a single error. I tested all of the hard drives and NVMe drives and they all pass. Unraid crashed again last night. I had Sonarr getting a show had about 60 different episodes and the system crashed again. I can basically repeat this crash now when ever i want. If i have the system moving a lot of data or indexing things the CPU is all over the place and mostly pinged at 100% utilization until it crashes. I have a spare hard drive from a previous build that I will use to load windows onto and run prime95 on the server. Should I disconnect all the other drives that I use for Unraid?

Smart people of UNRAID i need your help! As the title suggest i can not get the Reverse Proxy working. I currently have my own domain (at squarespace) that i want to utilize for the reverse proxy to expose. My OMBI docker to the internet. I have family that I want to have access to request movies, and do not have discord. I followed spaceinvaders video and watch a few other videos but can not get this to function properly. I have my domin being forwarded to duckdns.org and utilizing cloudlfares nameservers, on unriad i have swag, cloudflare, duckdns, and ombi utlizing a proxynet (following spaceinvaders video) Setup below with Photos attached: Unraid -utilizes port 81 for HTTP access and 444 for HTTPs (there are other devices on the network that utilizes 80 and 443 which was creating issues) SWAG Docker - URL: mydomain.net - DNSPLUGIN: cloudflare - port 81 using 180 - port 444 using 1443 - swag defalut config file edited to utilize 81 and 444 - Ombi config file edited to utilize 444 DUCKDNS Docker - subdomain: mysubdomaindomain (same as what is found on duckdns.org) - Token: found on duckdns.org Cloudflare Docker (was using selfhosters docker but it will not stay running not sure why now using this container) - CF Hosts: mydowmain.net - CF APIKEY: global api key from Cloudflare - tried to utilize with and without vpn OMBI Docker - Base URL left blank - In Docker: Application URL: ombi.mydomain.net - In Docker: Base URL blank Router Port Forwarding - Port 81 forwarded to 180 - Port 444 forwarded to 1443 Squarespace DNS - Cname created: OMBI.mydomain.net to www.mysubdomain.duckdns.org Domain forwarding Rule: ombi.mydomain.net to www.mysubdomain.duckdns.org Nameservers: utilizing cloudflares nameserers Cloudflare SSL.TLS - set to full (strict) DNS records same as what's found on Squarespace Cloudflare nameservers- same as what i put into squarespace If I type into a web browser ombi.mydomain.net i receive a 522 error. if i type in www.mysubdomain.duckdns.org i get a 500 internal server error. Any help figuring this out would be greatly appreciated. Im new to this and looking forward to getting this working.

I ran it for 2 hours I'm going to run a test tomorrow for at least 24 hours. I've been able to recreate a crash now a couple of times. Any massive file transfers, or recently I had photo prisim indexing my photos and every time my cpu cores are almost all maxed and it will crash. I want to run prime 95 as well to test the CPU bios settings. I'm going to boot to a windows thumb drive and run it to see how it does as well

Can I stress test my CPU through Unraid? I've noticed that when the server has files written to the disks or larger tasks being done, the CPU cores will show high utilization on all cores, even those passed to VMs. I want to see if the CPU is stable as well as an extended mem test. If there isn't a stress test on Unraid, is it a stupid idea to put Windows on an external hard drive and run prime95 to ensure I don't have issues with the CPU?

I'll run a memory check again. I ran the memory check in the bios and it came up with nothing

Server lasted for some days but it went down unresponsive today. narrowed it down to two plugins: CA Auto Turbo write mode, Dynamix chace directories. Also I had photo prisim indexing my photos. It hung while i did that. syslog tower-diagnostics-20240125-1541.zip

I tried to give the docker a fixed IP and that didnt help either. I can see from the docker page the docker has an IP of 0.0.0.0 and even with the path added there is nothing in the docker path not sure what to do

Ok never mind the docker still stops not sure what is going on with this. Is there anyway to full remove the docker and then do a fresh install?

Well i couldnt remove the email address with out removing the parameter but i gave it a fixed IP address and its staying connected

My cloudflare Docker does not stay running, when i start it it will show its started and 30 seconds later it stops. I did notice that it is not getting a IP address and sits at 0.0.0.0 and there is no volume mappings. Not sure how to fix this. Ive uninstalled the docker a few times and reinstalled, and there is no data in the appdata folder to erase. Ive attached the diagnostics and the config as attachments. Any help to get this up and running would be greatly appreciated. tower-diagnostics-20240124-1417.zip

I added the path and the docker still doesnt stay running. I start the docker and within 30 seconds it stops. Is there anyway to reinstall the docker fresh to fix this issue?

Today was attempting to install another docker and the Webui froze and was unresponsive for 10 mins but unraid connect was available. From unraid connect i stopped the array, and it was able to bring back the webui. tower-diagnostics-20240124-1141.zip

How do i fix this? I removed the docker and reinstalled and it didnt work.

my Cloudflare DDNS docker will not stay running. I will start it and it starts but within 30 seconds it stops running. Any clue on how to correct this issue? tower-diagnostics-20240123-1554.zip