T_Matz

Currently running 6.12.3 and I have a single core always sitting between 80-95% utilization where the rest of the cores sit between 0-6% utilization. It bounces between Core 0 and 12 but one of the cores is always above 80% utilization. Not sure what i should do to correct this. Rig details Intel Core i7-12700K | ASUS ROG Strix Z690-G Gaming WiFi | CORSAIR Vengeance 64GB (2 x 32GB) RAM DDR5 5200 | 5 - Seagate IronWolf Pro 12TB | SAMSUNG 980 PRO M.2 2TB (cache drive) | SAMSUNG 970 EVO PLUS m.2 250GB (VM drive) | MSI 2070 super (VM GPU) | WD Purple Pro 14 TB (VM Passthrough) | Sandisk Ultra Dual -64 GB (boot device)

you can see with the pictures that one of the cores is always over utilized, Ive noticed occasionally it will sit at 100% as well

Currently running 6.12.3 and I have a single core always sitting between 80-95% utilization where the rest of the cores sit between 0-6% utilization. Also upon a full reboot all cores will be above 80% utilization for 15 mins. Not sure what is going on any help to help troubleshoot the issue would be appreciated. Rig details Intel Core i7-12700K | ASUS ROG Strix Z690-G Gaming WiFi | CORSAIR Vengeance 64GB (2 x 32GB) RAM DDR5 5200 | 5 - Seagate IronWolf Pro 12TB | SAMSUNG 980 PRO M.2 2TB (cache drive) | SAMSUNG 970 EVO PLUS m.2 250GB (VM drive) | MSI 2070 super (VM GPU) | WD Purple Pro 14 TB (VM Passthrough) | Sandisk Ultra Dual -64 GB (boot device)

I haven't had any issues either since switching to IPv4. It does suck not having IPv6 capabilities

Switching to just ipv4 fixed my issue

I changed it to ipv4 only. The GUI has been good now for an hour. I will update if it becomes unresponsive again

After updating to 6.12 the web GUI becomes unresponsive after a few minutes. All Dockers and VMs operating normally. If I reboot the system the web GUI is accessible for a few minutes. I am able to ssh into the system but unable to pull diagnostics after webgui becomes unresponsive. Rig details Intel Core i7-12700K | ASUS ROG Strix Z690-G Gaming WiFi | CORSAIR Vengeance 64GB (2 x 32GB) RAM DDR5 5200 | 5 - Seagate IronWolf Pro 12TB | SAMSUNG 980 PRO M.2 2TB (cache drive) | SAMSUNG 970 EVO PLUS m.2 250GB (VM drive) | MSI 2070 super (VM GPU) | WD Purple Pro 14 TB (VM Passthrough) | Sandisk Ultra Dual -64 GB (boot device)

Bump

I was able to get this diagnostics report prior to the WEBGUI becoming unresponsive tower-diagnostics-20230703-1042.zip

Ive tried multiple times, when the WEBGUI stops responding I am able to SSH into my UNRAID server but when I enter the diagnostics command it never completes. It just sits there blinking. under the command. If I reboot the machine i am able to log into the WEBGUI and also SSH into the UNRAID server the diagnostics will complete. with UNRAID 6.11.5 did not give me these issues

Are you asking for the sys log or something else? Rig details Intel Core i7-12700K ASUS ROG Strix Z690-G Gaming WiFi CORSAIR Vengeance 64GB (2 x 32GB) RAM DDR5 5200 5 - Seagate IronWolf Pro 12TB SAMSUNG 980 PRO M.2 2TB (cache drive) SAMSUNG 970 EVO PLUS m.2 250GB (VM drive) MSI 2070 super (VM GPU)

Web GUI becomes unresponsive within 1 hours of a reboot. All Dockers and VMS continue to run but unable to log into unRAID web GUI.

netdata is unable to connect to the netdata cloud. is there a setting i have to change in order for it to get access to the internet?

That worked! Thank you, i did have a back up so the data base was still there and its attempting to repair now. Thank you so much!

I am still unable to get Radarr to open. I am getting an ERR_connection_refused error. Every other docker opens correctly. RADARR was able to open 2 weeks ago with no issues. I am not sure what I should do. Ive attached the logs and a screen shot of my set up. Any help is greatly appreciated. Binhex-radarr log.txt

Radarr is unreachable for me. When i try to connect to the webui i get a refused connection. Sonarr connects just fine with no issues. Doe anyone know what i can do to fix this issue? Binhex-radarr log.txt

Wow you aren't having any issues with your NIC? I think I'll have to just get a new NIC for my server, does anyone know of a list of known working NICs

This did not help and i had to remove the 10G NIC. It was causing issues with even the onboard NIC. Once removed i havent had any issues with the onboard NIC. But that is only 1 gigabit. I havent found anything to get this card to work, does anyone have a suggestion for a card that would work?

Thank you @zoggyI will downgrade my server OS version and see if that helps. I will report back if it does or does not.

Here is what I am looking at. You have the same issue as mine, your eth1 interface is down. I dont know how to change that to up. I went into the ssh and put in ifconfig -eth1 up it didnt give me a error code but if i do a lshw command it states the ports are disabled. if i plug a cable into the disabled prots it spits out a firmware issue in the logs as well.

Im new to unraid, and I am having issues with my 10G NIC. It is generating firmware errors in the logs and I am not sure how to fix the issue. The error is: Feb 27 15:43:01 Tower kernel: ixgbe 0000:03:00.0: Warning firmware error detected FWSM: 0x00000000 ethernet card: Intel E10G42BT X520-T2 MOBO: ASROCK x570 Pro4 CPU: AMD 3900X