Pera78

the nic no longer works on both amd and intel motherboards. it's dead

I move the nic in another pc and the nic don't run. The nic result Power off

Hi, attached is the unraid syslog. Without having to read, just move inside the file to the date of October 29th at 01:31 in which the error occurs. Here is an excerpt from the log As you can see, the cause is due to the mellanox network card syslog-192.168.0.150.log

I followed the guide, but the situation did not change. After 7-8 hours, no access from the LAN to the server. The network card is turned off. Any suggestions?

Hi, after changing hardware from Intel to AMD threadripper, everything works except that after a while I can no longer access unraid from LAN. the PC is turned on and seems to be working. anyone have any ideas?

Hi everyone, I have a healthy HD from which I would like to copy the data into the array. Previously this hd was part of the array and still contains the data. The problem arises from the fact that when I put the new hd in the array putting zfs as system file, the reconstruction started but unraid gave me unmountable unsupported or no file system. I paused the reconstruction, I formatted the new disk in ZFS, the error disappeared and the reconstruction started again. However, in the occupied space bar it only shows me a few kilobytes, so I deduce that at the end of the reconstruction the new HD will be empty. So I ask if by putting the old HD with the data as unassigned devices I can copy the data to the new HD? if so with which docker? Unbalance?

Will this work ? https://www.ebay.it/itm/144475270744 can I connect it to a backplane that has 8087 inputs using appropriate cables or not?

Ok, thank you so much

even if the hard drives are sata?

I need to expand my unraid. I would like to buy a sas/sata lsi controller but I can't figure out what max capacity in tb I can get. I currently have 3 16tb hd's connected to the motherboard controller. If I buy another 16 TB to connect, for example, to an LSI 9208-8i, do you see them or have any limitations? Thank you

thanks for the answer but I have even more doubts than before. The idea is to use copper for the network and the PCs are at most 10 meters away

hi, i am building my first server in a 10 gb network and i would like to install unraid, can you recommend a 10 gb ethernet network card and its 10 gbe switch. Thanks