clusterfreak

Hi Kilrah, thanks for the tip, but docker will not start with the path with complete by-id path like /dev/serial/by-id/usb-Prolific_Technology_Inc._USB-Serial_Controller_AMAAn114J20-if00-port0

Hi, USB device assignement and order changing very often, how ist it possible to assign fixed /dev/ttyUSBx to USB devices ? USB devices are plugged in to same port for month and no chaning, removing or any else dynamic actions with USB. My most important docker for home automations ( SYMCON ) needs license assignmement after hardware changes. Yesterday order was ttyUSB0 an ttyUSB1 and now ttyUSB2 and ttyUSB1 Docker configuration, from yesterday and devices from today root@server:/dev/serial/by-id# ls -l total 0 lrwxrwxrwx 1 root root 13 Feb 12 11:16 usb-Prolific_Technology_Inc._USB-Serial_Controller_AMAAn114J20-if00-port0 -> ../../ttyUSB2 lrwxrwxrwx 1 root root 13 Feb 11 23:54 usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0069-if00-port0 -> ../../ttyUSB1 root@server:/dev/serial/by-id# BTW USB mamanger is installed and with VM´s I have no problems.

Voila, had some trouble with USB today and booted several times, not in case of stability. Reason was a Busch-Jäger KNX usb device. server-diagnostics-20220512-0007.zip

VMs working same way, checked if data only on cache, enable VM, config new W10 VMs, used existing Disk image, need some tries to find out correct disk driver and bios.

From my Symcon docker I had a backup and risked to build new container . Checked if appdata is on cache and not on array, then added new container with the previous Symcon template. it is now working again. Now I will look for data of my VMs

Done, diagnostics attached VM and docker still disabled and I am waiting for your advise. Guido server-diagnostics-20220510-0847.zip

Hi, I replaced my single cache disk with two disks/raid1 and now Docker and VM configuration is missing, no docker and no VM´s. I used the following instruction https://forums.unraid.net/topic/100306-solved-cache-austauschen-vorgehensweise/ Docker data and VM data are available but it seem to be available. Two things which may be reason for this issue. The Array was set to autostart and started after reboot without cache drive active. Any tips what I can do ? Regards, Guido server-diagnostics-20220510-0009.zip