song

Ok, I've uploaded itsong-diagnostics-20220615-1918.zip

Thank you for your answer. I have tried to change the model to Q35, but they are the same, and the graphics card will report error 43. I have tried both models, MAC OS and Ubuntu, and they can drive the output screen normally. This error occurred after the 6.10 upgrade. What do you mean by diagnostic information?

I'm very sorry. I've been asking for help in this post. It seems that I posted on other sub forums, and no one will answer my question. Recently, I encountered a problem, that is, the virtual machine passes through the independent graphics card. I can install "Ubuntu" to pass through the independent graphics card perfectly and output pictures on the display. When I install "windows10", the graphics card can output pictures to the display, but the resolution is very low, I installed the graphics card driver on the graphics card gtx650ti, and the device manager reported an error "-43". I checked the "form view" of the virtual machines "Ubuntu" and "windows" and found that the pass through parameters of the two virtual machines were different. I have taken a screenshot and marked the differences. I tried to apply the parameters of "Ubuntu" to "windows". A warning message appeared. I have taken a screenshot of the warning pop-up window. The configuration of my "unraid" has not been changed. Before I upgraded version 6.10, the "gtx650ti" in version 6.92 can be perfectly directly used by windows. After upgrading to version 6.10, the graphics card will report an error "43" after installing the driver. Please help me, thank you. This problem is similar to that of many users in the "Chinese version"!

我试着重新装了个WIN11和WIN1O，同样的情况，显示器能够显示，分辨率很低的那种，N卡驱动装上显示报错43，但是我在6.92安装的WIN10/11在6.10.2都可以正常运行使用独显

按照版主说的，intel的处理器在pcie aes应该使用下游覆盖，amd应该使用两者，但我的处理器是Intel的，我选择下游会导致直通失效，原因在于我启用了核显和独显一起使用，但我选择两者，核显和独显都能完美使用，这真的很迷

得到解决了吗 你的问题非常简单，上面的步骤没错。但是有一个重点你忽略了😁 GT710 不仅能在WIN下做直通，黑苹果也是免驱的，板载声卡也能一起直通使用。 我的是650TI GK106核心，同型号主板，只是不同品牌 另外机型型号Q35和1440没区别，都可以做独显直通。

So what does this log message remind you of? Why does it mention my iPhone's IP address?

Because the log message mentioned my UPS IP "127.0.0.1"

Jun 8 00:19:33 song nginx: 2022/06/08 00:19:33 [error] 4701#4701: *1779916 recv() failed (104: Connection reset by peer) while reading upstream, client: 192.168.50.12, server: , request: "GET //wsproxy/5701/ HTTP/1.1", upstream: "http://127.0.0.1:5701/", host: "192.168.50.254"

This log information indicates my UPS, may I ask what is the cause

Thank you very much for your test result. I also tested by myself later. The reason is that the new version of EMby has a decline in decoding performance, which has nothing to do with UNRAID

Since I installed the "Theme Engine" plugin, using CSS themes to change my console is so cool that I can't live without it. However, recently I found that sometimes CSS can not be accessed normally, leading to the theme failure, or need to manually change the theme Settings after restarting the UNRAID server, which makes me feel very troublesome, I hope the theme file can be built-in or saved by the user in the local, not affected by the network can normally use it! In addition, the custom icon of the "VMS" VM will be lost every time the VM configuration is changed and needs to be reset. This is very painful. I hope to improve these functions!

Ok, thank you. When I checked the logs recently, I found some warning information related to UPS. For the UPS power supply of BK650 model connected by UNRAID, I used the plug-in "Network UPS Tools" as the UPS server mode. The IP address displayed in the log information of the warning is my iPhone. Why is my iPhone associated with the UPS of UNRAID? The IP address of unRAID is 192.168.50.254. The IP address of iPhone is 192.168.50.12. The following is the unRAID log information "Jun 8 00:19:33 song nginx: 2022/06/08 00:19:33 [error] 4701#4701: *1779916 recv() failed (104: Connection reset by peer) while reading upstream, client: 192.168.50.12, server: , request: "GET //wsproxy/5701/ HTTP/1.1", upstream: "http://127.0.0.1:5701/", host: "192.168.50.254"

But my PC host "192.168.50.11" was powered down at 1:15, why did this message appear at 3:55?

I have uploaded my unRAID log information compression package, and I found that the error started at 3:55 am and continued until 4:09 am. "192.168.50.11" is my PC host, and I have turned off the power of the PC host at 1:15 am. Why does it have such error information at 3:55 am? This error message is reported on average 5-6 times per second

Today, I opened the system log and found thousands of wrong messages. I don't understand what this means. Could you tell me the reason for this?

Yes, I am Chinese and I am translating in Mandarin

I've been testing emby playing 4K video in my browser

I did not change the EMBY Settings, the transcoding Settings in 6.92 and 6.10 are the same, I did not limit the performance of CPU transcoding

My CPU is I5-10500 and the core display model is UHD630. If unRAID does not affect EMBY decoding, why do I roll back to version 6.92 and the decoding frame number is normal without any changes? When I upgrade version 6.10, the frame number immediately decreases?

Thank you, I know this thing, unRAID output display will affect the decoding of EMBY video, I have made a comparison between 6.92 and 6.10, in the same 4K movie, 6.10 is weaker than 6.92 decoding. The number of frames dropped by 6 due to the fact that the core display is working for UNRAID and is still occupying the core display in the background even when the monitor is not connected

If the core display is always occupied by UNRAID, even if the monitor is not connected. The decoding performance of the core display is still weaker than 6.92. Because UNRAID is always taking up the core display

Thank you, I know this thing, unRAID output display will affect the decoding of EMBY video, I have made a comparison between 6.92 and 6.10, in the same 4K movie, 6.10 is weaker than 6.92 decoding. The number of frames dropped by 6 due to the fact that the core display is working for UNRAID and is still occupying the core display in the background even when the monitor is not connected

If I unplug the HDMI video cable, the VGA failure light on the motherboard will stay on the next time I reboot the UNRAID system