dremeier

yes, it pops up right after boot. But I got a new Key file for a new usb drive. Now all seems to be fine.

after a power fail during boot process I got this message in the banner "your flash drive is corrupted or offline". I rebooted several times but still the same. I tried a new usb drive but I can't renew the Licence because I did this already month ago. But with the new usb drive and trial Licence there was no message in the banner, of course the array could not be started. Never the less unraid is running almost fine with this message, just sometimes a reply of a media file freezes, even if the file is in the cache pool. Tested the network with iperf3 and all seems to be fine. Please someone can have a look to the diagnostics? Thanks for all your support! mediatower-diagnostics-20221029-1832.zip

I solved the Problem: Shutting down the unraid server and edit the USB-Stick in a windows machine. Removed the file /config/network-rules.cfg and edit the file /config/network.cfg to default values: # Generated network settings USE_DHCP="yes" IPADDR= NETMASK= GATEWAY= BONDING="yes" BRIDGING="yes" Now the routing of virbr0 is working as it should and noVNC is working as well.

Hello Forum, after adding a 2nd NIC and changing the MAC address of this NIC to eth0, there is no virbr0 mapping to the LAN network. Of course I played a lot with all related network settings and now I´m lost in space. I also tried to change the nic to the default eth0 mac but still the same behavior. Please can someone guide me to solve the problem? Thank´s mediatower-diagnostics-20221009-1442.zip

Thank you, that I didn't know!

due to in the new nerd package for on unraid 6.11 is no mcelog, I need to install mcelog manually. how I can do this?

I´m not sure if the Sundtek driver are 'in tree' or 'out tree' because i'm not so deep in progging, for my understanding it is 'out tree'. For me the Sundtek device where a good choice wenn you have no PCIE slot available. The Support is extremely good, never seen such a good support. And the devices are working well! Why do you need my HW IDs ore Diagnostics???? I'm fine, on my side everything is working well. It was just my thought that others may be interested in, because i've seen a lot of threads asking for help but didn't got it solved with that driver. But of course, if I can help, let's go!

would it be for interest to add the sundtek driver? Sundtek docker WIKI the wiki is not correct, but I got it working. I can tell how I got it working if someone is interested.