xSniper

It will get updated, dont worry ;)

You need to use open source. Otherwise your gpu will not work. At least my 5060 ti didnt want without open source drivers.

Try to change the pcie lanes. go for gen3 for example. See if fix the issue.

Hello lads, I managed to “fix” the issue that I had. Apparently my motherboard is advertised as pcie 5.0 and it have options to set up auto or 5.0 the pcie but when you leave it to auto or 5.0 or even 4.0 is breaking the unraid (when I say that it mean that my pools are not working anymore and I need to redo the unraid usb stick and copy my config again, I dont know why unraid is doing that) and the gpu is not working. But I set up everything on gen 3.0 x8 and everything is working fine, not ideal but for now until I find a new motherboard is fine. Thank you to everyone for all the support. Much appreciated.

So I reseat the gpu, I tried it on an other PC and is working. I even set up every pcie from bios on gen4/5. I am getting output on the gpu but the unraid just don't want to use it, is getting me this error when is starting: Aug 15 17:21:51 nas kernel: NVRM: nvCheckOkFailedNoLog: Check failed: GPU lost from the bus [NV_ERR_GPU_IS_LOST] (0x0000000F) returned from rpcRecvPoll(pGpu, pRpc, NV_VGPU_MSG_EVENT_GSP_INIT_DONE) @ kernel_gsp.c:4744 Aug 15 17:21:51 nas kernel: NVRM: nvAssertOkFailedNoLog: Assertion failed: GPU lost from the bus [NV_ERR_GPU_IS_LOST] (0x0000000F) returned from kgspWaitForRmInitDone(pGpu, pKernelGsp) @ kernel_gsp_gh100.c:928 Aug 15 17:21:51 nas kernel: NVRM: RmInitAdapter: Cannot initialize GSP firmware RM Aug 15 17:21:51 nas emhttpd: shcmd (78): /etc/rc.d/rc.docker start Aug 15 17:21:51 nas rc.docker: Starting Docker daemon... Aug 15 17:21:51 nas kernel: pcieport 0000:00:01.0: AER: Multiple Correctable error message received from 0000:01:00.0 Aug 15 17:21:51 nas kernel: pcieport 0000:00:01.0: AER: Multiple Correctable error message received from 0000:01:00.0 Aug 15 17:21:51 nas kernel: pcieport 0000:00:01.0: AER: Multiple Correctable error message received from 0000:01:00.0 Aug 15 17:21:51 nas kernel: pcieport 0000:00:01.0: AER: Uncorrectable (Non-Fatal) error message received from 0000:01:00.0 Aug 15 17:21:51 nas kernel: pcieport 0000:00:01.0: AER: Multiple Correctable error message received from 0000:00:01.0 Aug 15 17:21:51 nas kernel: pcieport 0000:00:01.0: AER: found no error details for 0000:00:01.0 Aug 15 17:21:51 nas kernel: pcieport 0000:00:01.0: AER: Multiple Uncorrectable (Non-Fatal) error message received from 0000:01:00.0 Aug 15 17:21:51 nas kernel: pcieport 0000:00:01.0: AER: Multiple Correctable error message received from 0000:00:01.0 Aug 15 17:21:51 nas kernel: pcieport 0000:00:01.0: AER: found no error details for 0000:00:01.0 Aug 15 17:21:51 nas kernel: pcieport 0000:00:01.0: AER: Multiple Correctable error message received from 0000:00:01.0 Aug 15 17:21:51 nas kernel: pcieport 0000:00:01.0: AER: found no error details for 0000:00:01.0 Aug 15 17:21:51 nas kernel: pcieport 0000:00:01.0: AER: Multiple Correctable error message received from 0000:00:01.0 Aug 15 17:21:51 nas kernel: pcieport 0000:00:01.0: AER: found no error details for 0000:00:01.0 Aug 15 17:21:51 nas kernel: NVRM: iovaspaceDestruct_IMPL: 1 left-over mappings in IOVAS 0x100 Aug 15 17:21:51 nas kernel: NVRM: GPU 0000:01:00.0: RmInitAdapter failed! (0x62:0xf:1859) Aug 15 17:21:51 nas kernel: NVRM: GPU 0000:01:00.0: rm_init_adapter failed, device minor number 0 Aug 15 17:21:51 nas kernel: NVRM: osInitNvMapping: *** Cannot attach gpu Aug 15 17:21:51 nas kernel: NVRM: RmInitAdapter: osInitNvMapping failed, bailing out of RmInitAdapter Aug 15 17:21:51 nas kernel: NVRM: GPU 0000:01:00.0: RmInitAdapter failed! (0x22:0x56:742) Aug 15 17:21:51 nas kernel: NVRM: GPU 0000:01:00.0: rm_init_adapter failed, device minor number 0 Any other suggestions?

Not yet, I am still at work. Is a 750w or 650w (I don`t remember exactly) power supply from silverstone, about 1 year old. I do not have any riser cable is directly in the pcie slot. I didn't try it yet in an other computer.

Is a brand new card, I received it yesterday. I remove my rtx a2000 and I add this one. Now after I added I didn`t know why is not recognise, so I search on google and I found the forum post where it said to change to open source. So I did that but my card is still not working / recognise by the plugin. Also I just tried now on chatgpt and it say that I should try to remove it and try to reseat the gpu maybe that would work. I am not sure what is the issue.

I dint, but I had an rtx a2000 before puting the 5060 ti and I didnt had any issues. I could try when I arrive home, but I don`t think thats the issues. Also I nuke the drivers because I read on the forum that for 50 series you need open. So I am not sure what is the issue. I read a bit on google and they are saying that it might need to be reseated and plug it again. I will try both of this when I am back home. Maybe I will get other solutions to try by then also :) Thank you for your suggestion.

hope this helps :) thank you mate nas-diagnostics-20250815-1204.zip

Good morning, I have an issue with the driver I believe. Is not recognizing my rtx 5060 ti. I updated the unraid to 7.2 beta, I have nvidia drivers set up on open source but is still saying "Installed GPU(s): No devices were found". Any suggestions what should I try next? Thank you.

Did you guys find a solution??? I have same issue. Motherboard Asus ROG B760I.

Multiple Unraid Array ZFS Intel Arc