Ockingshay

updated to rc3 via the instructions on github, but the gif from a spundown disk isn't showing properly. see attached. bug perhaps?, i'll try redownloading and installing again to see if that clears it, but i can see the .gif file is there and i've tried a couple of browsers (safari latest, firefox latest) EDIT* redownload, reinstall nor reboot has fixed the issue.

have i gone blind, or has the function to schedule a parity check been removed from webgui? i use to have it run once a week. If so, please bring it back That, and system temps.

Please see the Troubleshooting page, Obtaining a SMART report section. Thanks Rob, just what i was looking for, and here it is: root@Ruby:/boot# smartctl -a -A /dev/sdg smartctl 5.40 2010-10-16 r3189 [i486-slackware-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: WDC WD30EFRX-68AX9N0 Serial Number: WD-WMC1T1315735 Firmware Version: 80.00A80 User Capacity: 3,000,592,982,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 9 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Fri Mar 22 08:27:17 2013 GMT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: (39120) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x70bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 192 192 051 Pre-fail Always - 64 3 Spin_Up_Time 0x0027 191 176 021 Pre-fail Always - 5425 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 13 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 209 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 13 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 11 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 1 194 Temperature_Celsius 0x0022 128 118 000 Old_age Always - 22 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 3 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 SMART Error Log Version: 1 ATA Error Count: 2 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2 occurred at disk power-on lifetime: 65 hours (2 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 d0 01 1c e3 Error: UNC at LBA = 0x031c01d0 = 52167120 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 80 01 1c e3 08 2d+17:30:42.860 READ DMA c8 00 00 80 02 1c e3 08 2d+17:30:42.839 READ DMA ec 00 00 00 00 00 a0 08 2d+17:30:42.839 IDENTIFY DEVICE ef 03 46 00 00 00 a0 08 2d+17:30:42.839 SET FEATURES [set transfer mode] Error 1 occurred at disk power-on lifetime: 17 hours (0 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 d0 01 1c e3 Error: UNC at LBA = 0x031c01d0 = 52167120 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 80 01 1c e3 08 17:06:33.759 READ DMA c8 00 00 80 02 1c e3 08 17:06:33.732 READ DMA ec 00 00 00 00 00 a0 08 17:06:31.503 IDENTIFY DEVICE ef 03 46 00 00 00 a0 08 17:06:31.503 SET FEATURES [set transfer mode] SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 90% 209 52130993 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. It doesn't look as though it can complete: Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 90% 209 52130993 stuck like that for hours now.

thanks fore response. How do i run a smart report? i don't see an option in preclear_disk and because the drive isn't part of the array i cannot run a test using the webgui.

Hi, Just attempted to preclear a second wd red 3tb before i went on holiday 5 days ago and i've come back to what appears to be stuck at 0% simplefeatures says: Preclear in progress... Pre-Read. 0% @ 136 MB/s (0:03:13) When i remote into the server the screen shows what is in the attachment, so it's doing something. I don't even know to to begin searching to see if someone has had this before, but i'll have a look now around the forums. is the drive DOA? EDIT* no mention of the drive in /boot/preclear reports. I can see start, report and finish files for the 1st hdd i did, but nothing for this new drive. syslog is massive 2.5GB and states over and over: Mar 21 04:43:45 Ruby kernel: sd 0:0:3:0: [sdg] Result: hostbyte=0x04 driverbyte=0x00 Mar 21 04:43:45 Ruby kernel: sd 0:0:3:0: [sdg] CDB: cdb[0]=0x88: 88 00 00 00 00 01 5d 50 73 30 00 00 00 08 00 00 Mar 21 04:43:45 Ruby kernel: end_request: I/O error, dev sdg, sector 5860520752 Mar 21 04:43:45 Ruby kernel: sd 0:0:3:0: [sdg] Unhandled error code Mar 21 04:43:45 Ruby kernel: sd 0:0:3:0: [sdg] Result: hostbyte=0x04 driverbyte=0x00 Mar 21 04:43:45 Ruby kernel: sd 0:0:3:0: [sdg] CDB: cdb[0]=0x88: 88 00 00 00 00 01 5d 50 73 30 00 00 00 08 00 00 Mar 21 04:43:45 Ruby kernel: end_request: I/O error, dev sdg, sector 5860520752 Mar 21 04:43:45 Ruby kernel: sd 0:0:3:0: [sdg] Unhandled error code Mar 21 04:43:45 Ruby kernel: sd 0:0:3:0: [sdg] Result: hostbyte=0x04 driverbyte=0x00 Mar 21 04:43:45 Ruby kernel: sd 0:0:3:0: [sdg] CDB: cdb[0]=0x88: 88 00 00 00 00 01 5d 50 73 30 00 00 00 08 00 00 Mar 21 04:43:45 Ruby kernel: end_request: I/O error, dev sdg, sector 5860520752 Mar 21 04:43:45 Ruby kernel: sd 0:0:3:0: [sdg] Unhandled error code Mar 21 04:43:45 Ruby kernel: sd 0:0:3:0: [sdg] Result: hostbyte=0x04 driverbyte=0x00 Mar 21 04:43:45 Ruby kernel: sd 0:0:3:0: [sdg] CDB: cdb[0]=0x88: 88 00 00 00 00 01 5d 50 73 30 00 00 00 08 00 00 Mar 21 04:43:45 Ruby kernel: end_request: I/O error, dev sdg, sector 5860520752 Mar 21 04:43:45 Ruby kernel: sd 0:0:3:0: [sdg] Unhandled error code Mar 21 04:43:45 Ruby kernel: sd 0:0:3:0: [sdg] Result: hostbyte=0x04 driverbyte=0x00 Mar 21 04:43:45 Ruby kernel: sd 0:0:3:0: [sdg] CDB: cdb[0]=0x88: 88 00 00 00 00 01 5d 50 73 30 00 00 00 08 00 00 Mar 21 04:43:45 Ruby kernel: end_request: I/O error, dev sdg, sector 5860520752 Mar 21 04:43:45 Ruby kernel: sd 0:0:3:0: [sdg] Unhandled error code Mar 21 04:43:45 Ruby kernel: sd 0:0:3:0: [sdg] Result: hostbyte=0x04 driverbyte=0x00 Mar 21 04:43:45 Ruby kernel: sd 0:0:3:0: [sdg] CDB: cdb[0]=0x88: 88 00 00 00 00 01 5d 50 73 30 00 00 00 08 00 00 Mar 21 04:43:45 Ruby kernel: end_request: I/O error, dev sdg, sector 5860520752 Mar 21 04:43:45 Ruby kernel: sd 0:0:3:0: [sdg] Unhandled error code Mar 21 04:43:45 Ruby kernel: sd 0:0:3:0: [sdg] Result: hostbyte=0x04 driverbyte=0x00 Mar 21 04:43:45 Ruby kernel: sd 0:0:3:0: [sdg] CDB: cdb[0]=0x88: 88 00 00 00 00 01 5d 50 73 30 00 00 00 08 00 00 Mar 21 04:43:45 Ruby kernel: end_request: I/O error, dev sdg, sector 5860520752 Mar 21 04:43:45 Ruby kernel: sd 0:0:3:0: [sdg] Unhandled error code Mar 21 04:43:45 Ruby kernel: sd 0:0:3:0: [sdg] Result: hostbyte=0x04 driverbyte=0x00 Mar 21 04:43:45 Ruby kernel: sd 0:0:3:0: [sdg] CDB: cdb[0]=0x88: 88 00 00 00 00 01 5d 50 73 30 00 00 00 08 00 00 Mar 21 04:43:45 Ruby kernel: end_request: I/O error, dev sdg, sector 5860520752 Mar 21 04:43:45 Ruby kernel: sd 0:0:3:0: [sdg] Unhandled error code Mar 21 04:43:45 Ruby kernel: sd 0:0:3:0: [sdg] Result: hostbyte=0x04 driverbyte=0x00 Mar 21 04:43:45 Ruby kernel: sd 0:0:3:0: [sdg] CDB: cdb[0]=0x88: 88 00 00 00 00 01 5d 50 73 30 00 00 00 08 00 00 Mar 21 04:43:45 Ruby kernel: end_request: I/O error, dev sdg, sector 5860520752 Mar 21 04:43:45 Ruby kernel: sd 0:0:3:0: [sdg] Unhandled error code Mar 21 04:43:45 Ruby kernel: sd 0:0:3:0: [sdg] Result: hostbyte=0x04 driverbyte=0x00 Mar 21 04:43:45 Ruby kernel: sd 0:0:3:0: [sdg] CDB: cdb[0]=0x88: 88 00 00 00 00 01 5d 50 73 30 00 00 00 08 00 00 Mar 21 04:43:45 Ruby kernel: end_request: I/O error, dev sdg, sector 5860520752