rushgunner

Intel-GPU-TOP was installed prior in 6.14, worked fine. still installed and on latest version, only thing changed was going to 7.0 and plex wont start skynet-diagnostics-20250124-1934.zip

So I upgrading to 7.0, everything was fine prior to upgrading.. Once the reboot and switch to 7.0, Plex would not start, and would just say error. I figured out that it was erroring on --device=/dev/dri:/dev/dri being added for extra perimeters to enabled my iGPU hardware transcoding. I have temporarily removed --device=/dev/dri:/dev/dri and plex with start fine. Did 7.0 somehow remove my iGPU options or support now? New user here thanks

Thank you!!!

I have the server stopped and I see the box to put in maintenance mode, but where is the other box I select for sync?

Sorry newb here, so I’ll need to replace the drive then?

Not seeing where the rebuild option is?

It does appear like all the stuff on the emulated drive is there though

I’m confused on how I would rebuild it are you able to let me know what I need to do again I appreciate your time in this

Thanks for taking a look at it. I have the new one attached. As far as the NVMe do you mean to power it down and remove the actual module and clean it off and re-inserting it? skynet-diagnostics-20240913-2121.zip

I ran file system check with these results: xfs_repair status: Phase 1 - find and verify superblock... Phase 2 - using internal log - zero log... - scan filesystem freespace and inode maps... - found root inode chunk Phase 3 - for each AG... - scan (but don't clear) agi unlinked lists... - process known inodes and perform inode discovery... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - agno = 4 - agno = 5 - agno = 6 - agno = 7 - process newly discovered inodes... Phase 4 - check for duplicate blocks... - setting up duplicate extent list... - check for inodes claiming duplicate blocks... - agno = 0 - agno = 4 - agno = 3 - agno = 2 - agno = 5 - agno = 6 - agno = 7 - agno = 1 No modify flag set, skipping phase 5 Phase 6 - check inode connectivity... - traversing filesystem ... - traversal finished ... - moving disconnected inodes to lost+found ... Phase 7 - verify link counts... No modify flag set, skipping filesystem flush and exiting not sure what to do next??

I logged on after my party check showing 1 error on one drive with red X any help? Very new user here and any specific help would greatly be appreciated has been running fine almost 1 year skynet-diagnostics-20240913-1422.zip

well, i hard reboot seemed to fix this, booted up now and array is started and all is working. i think i got lucky?? Any thing i should be checking to make sure im truly ok now?

So....My server has been running flawless for about a year and no very minimal for any of the advanced options. Just a bit ago i went to stop my array, and it hung and hung never to stop. I know the next thing i did was probably a huge no no, but i then rebooted the system via the webUI, it now will not boot into unraid UI. Please help, im lost where to begin and no very minimal on what to do next... Ill be waiting before i attempt anything next. Any help is GREATLY appreciated it!

Hello, new user here to unraid and nextcloud so please be patient and if you can explain fully for me. I have searched all over and just cant locate which/where/what files need to be changed. I am trying to upload via iphone a file larger then 500mb and get file to large error for my nextcloud. I have unraid 6.11.5, the latest nextcloud-linuxserver version docker and also with swag-linuxserver docker versions all at latest. Can someone specifically directing me into locating said files, and where exactly in the file and what needs to be changed? I have spent all day trying to locate and make changes to older results but have not changed. All changes have been reverted back. I have also dont restarts on the dockers each time as well. I have found this to be the most recent info: https://docs.nextcloud.com/server/latest/admin_manual/configuration_files/big_file_upload_configuration.html but can not locate what exactly the files to be changed i assume this is what is needed? Nextcloud comes with its own nextcloud/.htaccess file. Because php-fpm can't read PHP settings in .htaccess these settings must be set in the nextcloud/.user.ini file. Set the following two parameters inside the corresponding php.ini file (see the Loaded Configuration File section of :ref:`label-phpinfo` to find your relevant php.ini files) php_value upload_max_filesize 16G php_value post_max_size 16G Are these the only 2 items that need to be changed? if so, I just can not locate specifically where under my setup of unraid/dockers-nextcloud/swag

Would a 12th gen cpu with a dedicated graphics card, work with plex with HW transcoding and tone mapping?