finchyboyz

That worked a treat thank you. But now i have another issue ive set it up as per the video by SPO and when i open the gui i get the following pslash screen. nextcloud.log

Hi all sorry if this has been asked before but i have decided to setup nextcloud and followed the guide on youtube done by spaceinvaderone. when i setup Mariadb look for the console i dont seem to have the option, any points guys,seen this before? Thanks in advance

Hi trurl, When i click on the Stat setting icon and go to the page i get the following. Placement is greyed out and says header but there isnt anything on the header?

Possibly a corrupt flash drive. Put it in your PC and let it checkdisk. Hi guys OK i can finally get back on to reply i did what was suggested and checked the USB drive no errors were detected, ive tried to install the plugin again and it installs but i just dont have the tab on the ribbon anymore. Am i just having a blond moment? Cheers Bob

Hi Guys have an issue with System.stats, i have tried to install again but i get the following error any ideas whats going wrong? Warning: simplexml_load_file(): I/O warning : failed to load external entity "/boot/config/plugins/dynamix.system.stats.plg" in /usr/local/emhttp/plugins/dynamix.plugin.manager/scripts/plugin on line 193 plugin: xml parse error cheers Bob

Hi aptalca, I have got Zoneminder up and running on my unraid with out a problem, i have 3 IPCC-B15N-w wireless IP CAMs and im trying to configure them. After changing the settings all i can get is a video window with the date and time and the rest is a blue screen. I have come to the following 2 conclusions, 1. i dont know what im doing and im configuring it in correctly or that the Camera isnt supported by Zoneminder. Thanks in advance Bob

I have managed to get it to install but it wont start and gives the error "failed to create PID" i have done the re-boot and stopped everything else but it still wont start.?? I managed capture the error at the bottom of the screen "Stopping Sonarr... Stop OK: Already stopped Starting Sonarr... Start failed: No PID created"

HI All Im just upgrading after a longwait and deciding what to do, i have tried to install Sonarr and get the following error. "2015-12-12 10:40:19 [ERROR] Install failed: Install file missing " i have deleted removed and restarted the server but i still cannot get the plugin to install. cheers

HI Phaze I managed to get up and running again in a sort of fashion, im now running Installed Version: 0.9.12.11.1406-8403350 of Plex but its a little flaky. I have a lot of stops and starts during play back and it goes back to the loading screen, sometimes it will just sit there waiting. I also lost Sonnar but have since recovered that, as i said something funky happened when i updated the plex client. running unraid 5.0.5 with dynamix as per your email. regards Bob

@Switchman Thanks the plugin is back up and running took ages to get to this stage but i cant browse to the GUI i get page unavailable. forgot to add then when i refresh the page the plugin ha stopped

Yes version 5 unraid with dynamix, is there an old version i could reload? two images below detail what i have first one is when i open plex form the setting page the second is if i then click in the plex tag in the top left.

Its just not running what i get when i open setting is a blank screen just with PLex in the top right, when i click on it it goes to the image that i previously attached. The blue box in the centre is animated like its loading something. its like its load but i cant do anything with it. r Bob

Hi Guys I have a PhAze Plex plugin issue any ideas whats not going on i have attached a screen shot i hope cheers

For me it's like once a week or two that it happens. For me it can be every 5 to 10 minutes, thats only because im manually updating at the moment i see it.

Phaze Media server 5.0.5 Its runs sometime but it seems something that turns it off. Been running with this all day and it still turns of at random times

I couldnt see the PID it created so i rebooted and when i open the plugin page its not started? It will no longer start via the plugin page.

Hi Phaze, i get it saying it has stopped on the plugin page, and on the gui it tells me it needs to reloaded. r Bob

HI Guys, I have moved over from Sickbeard to use Sonarr. I have it running and it does what it should but for some reason when i check on it, its in a stopped status in unraid?? I'm not sure what information in relation to logs to present as there are a few. regards Bob

Sort guys Thanks Switchman it worked finally after a few trys.

HI Guys Im still running version 5 of unraid but i have not been able to upgrade my plex from versionx9.9.x.x for months so i have left it. But yesterday when i tried to access plex from my roku they have updated the client and my older version is not longer compatible so i had to up grade to 9.12.x. i diod this from the plex website but it wouldnt start even though unraid said it had started. posted up the problem in another forum and they suggested using the PHAZE plugin which i did, but im still not able to launch plex and view it via the gui. Any ideas guys.

Hi trurl, just tried that and it then downloaded the phaz plugin, i modified the directory to fit my setup and it said it was all running but when i browse to the gui i get This webpage is not available ERR_CONNECTION_REFUSED Ive attached the log file again plexserver.txt

I have put it in the extras folder and re booted no joy, and also used installpkg still nothing?

Hi All, I have not been able to upgrade my plex for months so i have left it at version 9.9.....but when i went to play Plex on my Roku the client has upgraded and the older version of plex inst compatible so it seems. so i tried to upgrade and now PLex isnt working again. Below is the server log can anyone help please? Aug 26, 2015 22:53:54 [0xb39ff750] INFO - Plex Media Server v0.9.12.8.1362-4601e39 - slackware PC i686 - build: linux-slackware-i686 unraid Aug 26, 2015 22:53:54 [0xb39ff750] INFO - SQLITE3:(nil), 283, recovered 371 frames from WAL file /mnt/disk1/apps/plex/Library/Application Support/Plex Media Server/Plug-in Support/Databases/com.plexapp.plugins.library.db-wal Aug 26, 2015 22:53:54 [0xb39ff750] ERROR - SQLITE3:(nil), 1, no such table: synced_metadata_items regards Bob

Great ... good to hear you've got it working ! Bonienl the temp guage seems to be not working

unRAID Version: 5.0-rc11 i guess thats the problem Yes, the official v5.0 release of unRAID has added links, which are used by Dynamix. You can do a quick upgrade by copying the files bzimage and bzroot to your flash drive (overwrite the existing ones) and reboot your system B thanks for the help i'll give it a bash tomorrow time to hit the sack i think Bob Hi Bonienl All working so far thanks so much for all your help, now i can play thanks I notice that the temp gauge on the top right isnt showing am i missing something?