blueink

Thank you for the excellent guide! I followed it and was able to get vaultwarden up and running. I am having trouble with fail2ban. I have gotten my ip banned, or so it seems. I see in the SWAG dashboard that my ip address is in the vaultwarden jail; however, I can access vault warden without any issues. Any idea how I can troubleshoot this? I checked the fail2ban log and there is nothing there beyond the line indicating that the ip address is banned.

Sorry! Removed my question as this isn’t the right place and I don’t want to clutter up the thread. Thank you for this awesome plugin!

Hi, I just precleared my first hard drive and I think everything looks good, but can I get a confirmation? Thank you! ========================================================================1.13 == invoked as: ./preclear_disk.sh -A /dev/sdb == ST4000DX000-1CL160 Z1Z03FXA == Disk /dev/sdb has been successfully precleared == with a starting sector of 1 == Ran 1 cycle == == Using :Read block size = 8225280 Bytes == Last Cycle's Pre Read Time : 10:09:50 (109 MB/s) == Last Cycle's Zeroing time : 9:18:16 (119 MB/s) == Last Cycle's Post Read Time : 23:43:48 (46 MB/s) == Last Cycle's Total Time : 43:12:54 == == Total Elapsed Time 43:12:54 == == Disk Start Temperature: 30C == == Current Disk Temperature: 30C, == ============================================================================ ** Changed attributes in files: /tmp/smart_start_sdb /tmp/smart_finish_sdb ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE Raw_Read_Error_Rate = 115 117 6 ok 94589052 Seek_Error_Rate = 72 66 30 ok 17337159 Spin_Retry_Count = 100 100 97 near_thresh 0 End-to-End_Error = 100 100 99 near_thresh 0 Airflow_Temperature_Cel = 70 70 45 near_thresh 30 Hardware_ECC_Recovered = 34 33 0 ok 94589052 No SMART attributes are FAILING_NOW 0 sectors were pending re-allocation before the start of the preclear. 0 sectors were pending re-allocation after pre-read in cycle 1 of 1. 0 sectors were pending re-allocation after zero of disk in cycle 1 of 1. 0 sectors are pending re-allocation at the end of the preclear, the number of sectors pending re-allocation did not change. 0 sectors had been re-allocated before the start of the preclear. 0 sectors are re-allocated at the end of the preclear, the number of sectors re-allocated did not change. ============================================================================ ============================================================================ == == S.M.A.R.T Initial Report for /dev/sdb == Disk: /dev/sdb smartctl 5.40 2010-10-16 r3189 [i486-slackware-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: ST4000DX000-1CL160 Serial Number: Z1Z03FXA Firmware Version: CC44 User Capacity: 4,000,787,030,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Tue Feb 19 10:02:41 2013 PST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00)^IOffline data collection activity ^I^I^I^I^Iwas never started. ^I^I^I^I^IAuto Offline Data Collection: Disabled. Self-test execution status: ( 0)^IThe previous self-test routine completed ^I^I^I^I^Iwithout error or no self-test has ever ^I^I^I^I^Ibeen run. Total time to complete Offline data collection: ^I^I ( 97) seconds. Offline data collection capabilities: ^I^I^I (0x73) SMART execute Offline immediate. ^I^I^I^I^IAuto Offline data collection on/off support. ^I^I^I^I^ISuspend Offline collection upon new ^I^I^I^I^Icommand. ^I^I^I^I^INo Offline surface scan supported. ^I^I^I^I^ISelf-test supported. ^I^I^I^I^IConveyance Self-test supported. ^I^I^I^I^ISelective Self-test supported. SMART capabilities: (0x0003)^ISaves SMART data before entering ^I^I^I^I^Ipower-saving mode. ^I^I^I^I^ISupports SMART auto save timer. Error logging capability: (0x01)^IError logging supported. ^I^I^I^I^IGeneral Purpose Logging supported. Short self-test routine recommended polling time: ^I ( 1) minutes. Extended self-test routine recommended polling time: ^I ( 255) minutes. Conveyance self-test routine recommended polling time: ^I ( 2) minutes. SCT capabilities: ^I (0x50bf)^ISCT Status supported. ^I^I^I^I^ISCT Error Recovery Control supported. ^I^I^I^I^ISCT Feature Control supported. ^I^I^I^I^ISCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 117 100 006 Pre-fail Always - 158814065 3 Spin_Up_Time 0x0003 092 091 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 16 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 066 060 030 Pre-fail Always - 4185556 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 13 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 16 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 070 061 045 Old_age Always - 30 (Min/Max 29/33) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 11 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 21 194 Temperature_Celsius 0x0022 030 040 000 Old_age Always - 30 (0 21 0 0) 195 Hardware_ECC_Recovered 0x001a 033 015 000 Old_age Always - 158814065 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 109238198206477 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2007430296 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 8206098229 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. == ============================================================================ ============================================================================ == == S.M.A.R.T Final Report for /dev/sdb == Disk: /dev/sdb smartctl 5.40 2010-10-16 r3189 [i486-slackware-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: ST4000DX000-1CL160 Serial Number: Z1Z03FXA Firmware Version: CC44 User Capacity: 4,000,787,030,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Thu Feb 21 05:15:35 2013 PST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00)^IOffline data collection activity ^I^I^I^I^Iwas never started. ^I^I^I^I^IAuto Offline Data Collection: Disabled. Self-test execution status: ( 0)^IThe previous self-test routine completed ^I^I^I^I^Iwithout error or no self-test has ever ^I^I^I^I^Ibeen run. Total time to complete Offline data collection: ^I^I ( 97) seconds. Offline data collection capabilities: ^I^I^I (0x73) SMART execute Offline immediate. ^I^I^I^I^IAuto Offline data collection on/off support. ^I^I^I^I^ISuspend Offline collection upon new ^I^I^I^I^Icommand. ^I^I^I^I^INo Offline surface scan supported. ^I^I^I^I^ISelf-test supported. ^I^I^I^I^IConveyance Self-test supported. ^I^I^I^I^ISelective Self-test supported. SMART capabilities: (0x0003)^ISaves SMART data before entering ^I^I^I^I^Ipower-saving mode. ^I^I^I^I^ISupports SMART auto save timer. Error logging capability: (0x01)^IError logging supported. ^I^I^I^I^IGeneral Purpose Logging supported. Short self-test routine recommended polling time: ^I ( 1) minutes. Extended self-test routine recommended polling time: ^I ( 255) minutes. Conveyance self-test routine recommended polling time: ^I ( 2) minutes. SCT capabilities: ^I (0x50bf)^ISCT Status supported. ^I^I^I^I^ISCT Error Recovery Control supported. ^I^I^I^I^ISCT Feature Control supported. ^I^I^I^I^ISCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 115 100 006 Pre-fail Always - 94589052 3 Spin_Up_Time 0x0003 092 091 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 16 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 17337159 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 56 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 16 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 070 061 045 Old_age Always - 30 (Min/Max 29/33) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 11 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 21 194 Temperature_Celsius 0x0022 030 040 000 Old_age Always - 30 (0 21 0 0) 195 Hardware_ECC_Recovered 0x001a 034 015 000 Old_age Always - 94589052 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 126014340464696 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 9821467512 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 32052284577 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. == ============================================================================