Eisi2005
-
Posts
187 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by Eisi2005
-
-
Hi,
i´m running 6.0.1 and i manually move files from some disks (disc1,2,3,4) to one other disc (disc8). I moved many file from the first 3 disc, during the move process from disc4 , unraid crashed and i must hard reboot the machine. After reboot i could start the array but disc 1-4 show me not the correct free space. i see only the space before i move the files.
On the other side on disc 8 where i mive the files , there show unraid me the correct size. The size after moving the files from disc 1-3. Should i make a parrity check to get the correct free space value from the other discs or what should i do ?
Thanks
-
Thanks for the fast answer.
-
Hi,
today i have installed 6.0.1. all runs fine at the moment, the only thing i´m searching for is the "mover" settings. I could swear that this settings was under settings/Global share settings, where i could say at what time the mover will run.
Where could i find these feature now ?
-
When stuck at the SYSLINUX part, the USB stick is not bootable.
Take it out of unRAID and put in your PC, run "make_bootable".
Perhaps, LimeTech should get the Linux equivalent of make_bootable, include it in the plugin and run it as a part of the upgrade plugin.
Hey that's a good idea I'll look into it.
@limetech will there come a new plugin in the next days ? If yes i wait for the new plugin, if no then i try it with the old one
-
@RobJ
thanks for your answer. I´m running v5 with Dynamix Addon. I think depth parameter will not bring anything for me beacuse the movie structure is server\movie\A-C\Alien\Alien.mkv . All the other dirs called picture, series, mp3 have a smaller deep than the movie dir. and the movie dir is the dir i want to cache.
But when i understand you right with my bad english then i use in v5 only 1 gb for caching from my 8 gb memory ? Was it better for me and the caching to switch to v6 ? But why show me my system stat that from 8 gb there will be used 7 gb for cache ?
-
Hi,
is there any chance to exclude subdirectorys ? My Problem is that i have only one share called "server" under this share i have the folder "movie, picture, mp3 ....." But now cachedirs want to cache all the files. But my memory is with 8 gb to small to cache all these files, so the disks will spun up if i click through my dirs
-
@overbyrn
sorry the installation was fine but when i add a dlc to the webmenu i only see a add_file and this message. "failed'NoneType' object has no attribute 'DLC' 0.00 B DLC" the account for the dlc was a valid premium account. any idea ?
Second Problem is, i could create a user with python pyLoadCore.py -u but i could not login with this user. I could only login with standard user Admin/admin
Edit:
Here something from Logfile
Error importing DLC: No module named Crypto.Cipher
14.04.2015 20:42:06 CRITICAL 'NoneType' object has no attribute 'DLC'
It seems that there is missing a python module called python crypto ?
-
Thanks overbyrn the v5 plugin works perfect !!
-
nice to hear that v5 is still ready, hope to hear from you in next time !!
Thanks
-
@overbyrn
it would be wonderful if you could add a pyload package
Thanks
-
Hi,
is there any working pyload.plg that i could use. All the versions i have found are not working. Thanks
-
Hi,
is there any working pyload.plg that i could use. All the versions i have found are not working. Thanks
-
Hi,
i have the following problem. My isp make a 24h disconnect every day. If the 24h disconnect is during i´m connect to the vpn i could not connect web gui anymore. The share from my server is accessible also the server with telnet is accessible only the webgui i could not connect. I must restart the complete server, then i could connect again to the web gui. Is there anything i could do ?
-
Hi,
ok the vpn client works very good and the installation was perfect with the instructions from here. Thanks for this nice plugin.
I´m using privatinternetaccess as vpn provider. With the windows client i could enable data encryyption and data authentification. I the openvpn forum i found a thread where some told that i must modify the ovpn file with these :
cipher AES-128-CBC
and i must change the remote port for the connection from 1194 to 1196 .
Is this correct ? Must i modify more ? Have anyone experience with this vpn provider ?
-
Hi,
sorry for this stupid question but i dont want to make anything wrong.
I have a router and my unraid server is behind the router. No port is open to the unraid server, so no one from the internet could get to my unraid server only intern access. When i now install the open vpn client and get connected to my vpn provider i have a new external ip adress. Could anyone now get on my unraid server ? And if yes what must i do that i have only internal access to my unraid server when i´m connected to vpn ?
Thanks
-
@bjp
ok so the new disk seems to be defect. I will sent back to seller.
Thanks for your help.
Eisi
-
@bjp
thanks for your answer again. I have started some tests with the 4 tb hdd but they dont finished. I have run as example the long test for 5 hours an he remaining 90 %. Same with smart test. I get only read failure. I put back the 1.5 tb hdd to the slot and here he finished the smart test in 1-2 minutes.
Thanks
eisi
-
@bjp999
thanks for your answer. I have change the sata cable but the same problem. Then i try to start a short smarte report and a large smart report. but i dont kow if it was ok or not. Here is the last result. Hope anyone could say something to this report.
Thanks
-
OK after waiting 18 hours i reboot the server because i could not connect to the webgui and to the share. After reboot i have the same problem. Then after 30 minutes i could connect to the webgui and the share was online.
When i look in the webgui i see that the new 4tb disk have a red ball. I could connect with samba to the new disk and i could see my movies and i could start my movies on that new disk.
In the logfile are errors , but i dont know what i must do ?
Could anyone take a look and give me a hint ?
Thanks
-
Hi,
today i replace a 1,5 TB hdd with a 4tb hdd. After booting the server, unraid told me that disk 3 is wrong. What was the correct hdd i have replace. I select the new hdd for disk 3 and start the array. But then there is nothing. No webgui, no share. If i look through putty on the server i saw under /mnt/ disk 1 and 2 but no more disks.
Is this normal or what can i do ? I dont want to restart the server, because i dont know what happens in the background.
I´m using unraid 5
Could anyone give me a hint ?
-
Hi,
sorry for my noob questions but i´m not a linux and network expert. I want to use this nice plugin with an commercial vpn hoster. I only want to use the vpn client to go to the internet. What must i configure if i want to access the server from my internal ips ? What must i configure so that my server will not reachable from the internet over the ip from the vpn hoster ? I dont want to see my server in the internet only access through internal ip 192.168.x.x from my mediacenter and my home pc ?
Hope you understand what i mean ?
Greet
Eisi
-
Hi,
could anyone give me a hint. I use this nice plugin. In the plugin settings i have the option "run as user" there i could use root or nobody. Because i´m a linux noob i use windows to manage the downloaded files. The download is in a share called download and i want to move the movie from there to my "normal" share but under windows i have no rights. I could only move the movie under putty session with root rights. Is there any option to say "run as user" with the user who have write rights on my normal share ?
-
Perfect thanks for your fast answer
-
Hi,
i use a server with 1,5tb hdd only. Now i exand my server and bought a new 4 tb hdd for the parrity My mainboard is a older mainboard but it should handle 4tb hdd. After switching parrity disc and booting the server, unraid shows me a 4 tb and i assign the hdd to the parrity slot. After starting array unraid told me the a paarity rebuild / sync is starting and the time is 1200 minutes. This is a normal time for my unraid hardware , before with 1,5 tb hdd i have a time of about 600 minutes.
After about 550 minutes unraid spin down all data hdd and after about 900 minutes unraid wrote in log file:
Jan 11 05:35:15 Server kernel: md: sync done. time=50087sec
Jan 11 05:35:15 Server kernel: md: recovery thread sync completion status: 0
Jan 11 05:50:21 Server kernel: mdcmd (62): spindown 0
i dont know now if unraid use the complete 4 tb disc space now or only 2.2tb because the check should have longer ?
I hope you understand want i mean.
A logfile is attached
Unraid os is 5.0
[Solved] After system crash there is missing free space on disks
in General Support
Posted
thanks for your hint. I dont want to make anything wrong. Because i know that there is the wrong free file size. Should i still run first reiserfsck --check /dev/md1 or should i run reiserfsck --fix-fixable /dev/md1 immediately ?
Thanks for your help