Clayto

The UPS was replaced as the battery is not user-replaceable. Ok, Thanks for that. I'll look into the plugin and see if I can get the fix working.

Hi Thanks i will give it a go and see what happens. The server was restarted when swapping the UPS so I thought it may have reset.

Hi I have a APC Back-UPS BX1600MI connected to my UNRAID server via USB. I got an alert and that my Batteries have failed and the ups was beeping. The UPS was under warranty still and I got it replaced and it's now showing online and there are no alerts on the ups. The problem is UNRAID is still sending me alerts "Emergency! Batteries have failed on UPS Tower. Change them NOW" how do I stop this or reset the alerts? UNRAID Version: 6.12.13

I'm kinda new to the unraid scene and this is my first time upgrading my array. Currently rocking a 12TB parity drive in the Parity 1 slot, but I just grabbed myself a shiny new 18TB drive to chuck in the system. I'm keen to keep the system up and running as much as possible, and I reckon I'd like to avoid parity rebuilds if I can swing it. I'm thinkin' about tryin' this out: Pop the new 18TB drive in Parity 2, kick off a rebuild. Once that's done, stop the array, pull out the old Parity 1 drive, and start the array back up. Give the old 12TB Parity 1 drive a preclear. Once that's sorted, stop the array again and add the old 12TB drive to the array. Way down the track, chuck in a new Parity 1 drive. Couple of questions for you experienced folks: Will this plan even work, or am I off my rocker? How many rebuilds am I lookin' at here? I'm guessin' one when I add the 18TB drive. Any dramas runnin' with just Parity 2 for a bit? Should I just ditch this idea and swap the Parity 1 drive with the 18TB one, then preclear the old one and add it to the array? Any advice or help would be greatly appreciated, cheers!

Please to have helped. I use it for appdata and domains. I am looking to add a small zfs pool that I may use it for files I need faster access to.

You need to meet two requirements for the icon / exclusive share. Have Primary storage that is not the array and have no secondary storage. I believe the reason for this is because the Array uses the fuse file system to work. In the screenshot below you can see the only share with the icon is my Cache only share.

Just upgraded from 6.12.1 and haven't had any problem thanks. 12th Gen Intel® Core™ i5-12400 ASRock Z690 Pro RS

Thanks 👍

Hi, I have a question or two about the permit exclusive shares and if I should change my setup now I am on 6.12 I set changed my docker containers to cache only and then pointed the containers to /mnt/cache/appdata/ and also set the Docker directory to /mnt/cache/system/docker/docker/ to bypass FUSE and improve performance. Would it be better with the permit exclusive shares if I tune it on and then point both folders back to /mnt/user/ location is is the other setup best practice? Also how can you tell if a share is a exclusive share and bypassing FUSE?

Thanks you both for you feedback as this my first time upgrading I don't want to make a mistake. 🙂

Hi, I have an array pool of 3 - 12 TB drives with one parity. I have just purchased a 20 TB drive that will need to be the parity drive, and I will use the current 12 TB parity drive as a data disk. I have been looking everywhere and need help finding the correct way to upgrade my array. I have seen many examples and want to confirm the proper process before proceeding. Install and test the new parity drive (optional) Stop the array, place the new drive in the parity slot and start the array. After the rebuild, stop the array and assign the old drive as a data disk. This will trigger a format / clear function. I have a backup of my important data, so keeping parity is not essential, but keeping the array working is. Please let me know if this is correct. If not, what is the proper process? Thanks in advance.

Hi, I have this plugin installed with Automatically protect new and modified files: enabled. but when I check new files with "getfattr -d <file>" the hash information is missing until I go and run the build again manually. Am I doing something wrong or can I check if it's ruining somehow?