breakline

yeah hyper-v always disabled , I've re-installed windows many times on my 660 Ti . what I'm doing now is creating a base image for windows 10 and windows 8 cuz I really don't wanna do the virtio drivers install anymore lol. I decided to simplify things even more so I removed all but one hdmi output from the 970 and I still get the same results. I really don't understand what's happening but after I update the drivers the image gets worse with drivers from Nvidia site or via device manager like it goes from 720p(Microsoft display adapter) to 640x840 or worse. my next step is try a different OS and see what the results are, I saw a lot of arch in the confirmed working doc for 970 but don't know much about it. I have until the 24th to return this card so I'm going to keep trying until the weekend unless I figure out it for sure wont work. and THANKS for the help seriously much appreciated!!!

I tried that today and there were 4 different rom files for my card so I downloaded all of them and renamed them rom1 - rom4 and I tried .bin and .rom and tried again with all steps in my first post. When I add the code to the xml I get no output at all. any other tricks or should I just go back to my 660 Ti ? or maybe a similar card that would work ? I'm just afraid to get another card and go through the same steps again to have it still not work.

So I upgraded from an MSI twin frozr gtx 660 Ti to an asus gtx 970 strix and when I boot into windows with the 970 it only detects 1 of 3 monitors and in device manager it's the dreaded code 43 again. One weird thing I notice is that when I shut down or force stop the VM's with this card is the monitor stays active like it doesn't go to power save mode. everything works great with the 660Ti all 3 monitors & latest drivers and has for months. heres the steps I have tried: and the ONLY difference is the video card. win 8.1 x64 or win 10 x64 new and existing VM's older nvidia drivers . fresh unraid install. with and with out pcie_acs_override=downstream with and without amd_iommu=on iommu=pt iommu=1 vfio_iommu_type1.allow_unsafe_interrupts=1 checked xml's with diff > https://www.diffchecker.com/hdz5w3pz asus bios update checker said up to date for the video card. motherboard bios up to date. q35 and I440fx seabios and ovmf different PCIe slots and 660 Ti works fine in both. with and without the 660 Ti installed. here is my build: motherboard : ASRock Fatal1ty 990FX Killer cpu: fx8350 ram:32GB trident x ddr3 2400 gpu:MSI twin Frozr gtx 660 Ti gpu: ASUS strix gtx970 any help would be appreciated , I'm stuck .

I use deluge vpn docker from binhex and the scheduler seems to work great , I never used it before today but decided to try when I read this post. I have included some screen shots of the different states set in the scheduler and the speeds with each state. I thought I would have to install scheduler but all I had to do was enable it in the preferences . If you don't have a vpn or have other routes set then there is a non vpn one also.

np xxredxpandaxx your noobie docker guide helped me out quite a bit when I started ,its not much but glad to have it come back around a little !

there might be a way to add them after install, but my guess would be time and effort figuring out how might prove more time and effort than just starting freshmy personal opinion anyways, but yeah the screeen where you select browse to find the driver for the virtual disk to show up you just repeat the process for each driver.

When I very first started trying to passthrough my gtx 660 I was having pretty much the same results as you and the ONLY way I found out how to get it to work was adding a 2nd video card for unraid console to latch onto ( no integrated graphics ). I added a cheap gt 210 and unraid console picks that graphics card first so that my 660 is free for the vm's and its working awesome with windows 8.1 and nvidia drivers up to date . granted I have not tried the new steps listed in the wiki ,I'll be doing that here in the next week or 2 so that I can hopefully free that pcie slot for another card/machine. I need a way to tell unraid not to attach the console to the first card or maybe tell unraid that its headless and so I can test it out , but idk if thats possible. anyways if you have another card to test might be worth a shot. my hardware asrock 990fx fatality fx8350 msi gtx660 msi gtx 660TI pe

Did you install the virtio network drivers during windows 8.1 install ? here's the wiki guide : http://lime-technology.com/wiki/index.php/UnRAID_Manual_6#Installing_a_Windows_VM

this might help : jonp ( I think ) has been adding a lot to the wiki lately especially for vm's and passthrough , a lot of good info in here >>> http://lime-technology.com/wiki/index.php/UnRAID_Manual_6#Assigning_Graphics_Devices_to_Virtual_Machines_.28GPU_Pass_Through.29 Warning: Passing through a GPU to a SeaBIOS-based VM will disable console VGA access If you rely upon a locally-attached monitor and keyboard to interact with the unRAID terminal directly, you will lose this ability once you create a SeaBIOS VM with a GPU assigned. This is due to a bug with VGA arbitration and cannot be solved. This does NOT affect your ability to access the console using a telnet or SSH session, but local console access directly will appear to be frozen (blinking cursor, but no visible response to keyboard input). It does not matter if you are using on-board graphics for the console compared to a discrete GPU for the pass through to a VM or not. With OVMF, however, VGA isn't utilized, therefore arbitration isn't needed and therefore your console graphics will remain intact. Note that not all GPUs support OVMF as OVMF requires UEFI support on your GPU.

I already have a synergy license and use it often , for some reason in my brain I was thinking that since I was passing kb and mouse through that I wouldn't be able to do that,momentary lapse of reason i guess , but yes i have it all set up windows 8.1 vm thats always on and set up as the synergy server and then another linux vm as client and my seperate windows 8.1 work machine as client and its working beautifully with all machines and a backup kb and mouse for my work machine in case i need to reboot unraid. Thanks for the reply ghunter . P.S. I'm so psyched about my new setup, I have eliminated 2 machines so far and working on 2 more! unraid + docker + kvm + synergy FTW seriously my vision over the past couple years for what I wanted unraid to become is now a reality - an all in one one super machine ! Thank you limetech!

I totally understand that this may not be possible and I don't really care about the kvm switch , but really just looking for a solution to be able to use only one mouse and keyboard throughout the whole system simultaneously without switching cables or anything. my setup right now for the content of this post is 2 systems #1 is unraid has windows 8.1 passthrough with gtx 660ti 8gb ram and kvm switch passed through (showing as my keyboard model) and keyboard works but have to pass through seperate mouse for mouse functionality, #2 my work system with same keyboard and mouse connected to switch and works flawless,but plan on moving this to unraid as well in the near future. is there a way to get my kvm switch working properly with both mouse and keyboard ? or is there another solution out there that I may not know of that would work better to do what I need to achieve?

Hauppauge WinTV-HVR-2250 Dual TV Tuner 0a:00.0 Multimedia controller: Philips Semiconductors SAA7164 (rev 81)

everything looks right hopefully someone with more experience can chime in ,sorry ajgoyt I got nothing maybe something in this thread will help ? http://lime-technology.com/forum/index.php?topic=38381.0

did you check and make sure the docker img got created? like I have mine set to mnt/cache/docker/docker and so when i go to my network shares and go to Tower2/cache/docker I have the docker img in there.

not sure if this is your issue or not but you need to add the template repositories first before it will show you any templates to choose from and make sure that the repositories actually show in your repository list after you save, and there are many posts and information here on the forums check the stickies first but I hope these help ,some very informative posts to help you from the start. http://lime-technology.com/docker-guide/ and http://lime-technology.com/forum/index.php?topic=37732.0