Everything posted by Tom.KST
-
就是按照下面的方法，在旁路由中添加規則，主路由設置端口映射/轉發指向宿主機（即unraid的ip），內網端口則為docker設置的端口（外網端口看你喜好，可以跟內網端口一致）
-
这个设置比做防火墙nat规则复杂，不建议使用了
-
这时旁路只做nat转发，主路由做映射到docker
-
-
Good to know about this, thanks! As you can see that few of the users still meet the same problem, even he could access GitHub well via V.P.N... is it caused by 'non-global-proxy' V.P.N.?
-
只是提示啟用備用服務器，部分apps / plugins圖標會無法正常顯示，以及可能會影響到部分插件的安裝。 一般都沒有什麼問題，這樣通常是主服務器負載過大，而啟用鏡像服務器提供同樣的apps / plugins下載、安裝服務。
-
W兄的回複正確！ @Lain 1. 先在OP旁路由的"网络>>防火墙>>常规设置>>区域"新建一個"lan => lan"區域，然後在第二個設置頁"网络>>防火墙>>端口转发"添加NAT轉發，外部端口（可與內部端口不同，避免xxxx，你懂的）指向docker容器的內部端口，IP地址為unraid的局域網地址； 2. 主路由設置相應端口轉發指向旁路由IP地址、外部端口（不再指向unraid的局域網地址和內部端口了）
-
@alberttttlin，不知道你的重啟問題解決沒有。。。前幾天剛才一個朋友的PC電腦也出現類似的情況，開機自檢完成後即自動重啟。。。最後檢查結果是內存條接觸不良，將所有內存條拆下用橡皮擦來回清潔了幾次，用軟毛擦清潔了ram slots，重新插上開機就正常了。。。
-
緩存盤只對寫入起作用，目的是解決寫入時校驗降速的雞肋，然後在空閒時間、或定時、或手動對緩存執行mover，但對讀取沒有任何加速作用。
-
上一年舉家搬回國內家中長居，經常因為GFW搞到無法安裝更新，專門找出多年前的Phicomm N1做了ByPass Gateway，只供Unraid使用，一了百了…… 然後將需要爬牆的設備全部改gateway，不需要的設備正常上網
-
@Jeffmiao，可能下面的方法可以幫到你！
-
-
把證書和密钥放入qb根目錄/mnt/user/appdata/qbittorrent 然後去qb webui 指定路徑/config/xxx.crt, /config/xxx.key 重啟qb docker
-
segfault 段錯誤 - segmentation fault（通常簡稱為segfault）或者訪問衝突是由具有內存保護的硬件引發的錯誤，用於通知操作系統 (OS) 內存訪問衝突。 看日誌內容可知，是pgrep讀取libprocps.so進程受限或者出錯導致，也可能是系統分配虛擬內存出錯導致。 可以試試以下方法（不確定能否解決😂😂😂）： 打開TTYD輸入：cat /proc/sys/vm/max_map_count，看看數值是多少？（通常會是65530, 65535或10000） 再輸入：cat /etc/sysctl.conf，找到 'vm.max_map_count=xxx' 看看數值是多少？ 如果 'vm.max_map_count=0' 或者數值很小，那說明虛擬內存設置太小。。。 解決方法：打開TTYD輸入 'echo 10000 > /proc/sys/vm/max_map_count' 回車後再查日誌
-
登記申請KEY時不是有填寫郵箱地址嗎？KEY鏈接會發到你填寫的郵箱地址
-
1. 備份原U盤根目錄下的『config』文件夾後格式化U盤，從官方下載USB Flash Creator重新製作引導，製作完成後把『config』文件夾複製到U盤對應目錄粘貼並覆蓋。 2. 插上U盤引導系統並登入WebUI >> Tools >> Registration >> Install Key，複製購買成功郵件中的密鈅鏈接地址並粘貼到Key file URL後面，然後點擊『INSTALL KEY』。 3. 在Registration下顯示『Thank you for choosing Unraid OS!』即表示激活成功了！
-
應該是2.5G網卡驅動問題，網上查到這款主板的板載網卡資訊極少
-
只有一塊校驗盤並且校驗盤狀態良好，直接替換壞盤重建數據即可
-
Hi @ljm42, Actually I was about to tell that all the URLs in ALLOWED_ORIGINS are working fine, no matter the localhost or self-own domain or [hash].unraid.net, but when I tried tracert unraid.net, the result told there're some of the dns/nat servers return 'timeout' in China Mainland, such as I access GitHub from my country, it's not working quite well sometimes... I just wanna tell that the problem wasn't caused by My-Server service, in fact, the issue was caused by China Government Firewall protocols. Not sure if someone in other places or countries would meet this the same. Hey, I was not reporting service issues. 😂😂😂 And I appreciate for your patience, too.
-
And, when I tried to access my unRaid webui via mobile phone data, it works well, but at the same time, ‘unexpected token’ appeared while I was accessing via home networks, before I reset my network devices. That’s why I was wondering if this issue was caused by the dns cache poisoning.
-
I did run through a reverse proxy before, it’s not working stabling then I removed it. But ‘unexpected token’ appeared after I removed it, when I reset the fiber gateway and router, after the public IP changed, My-Server plugin is working fine again, so I thought it might be caused by the dns cache poisoning issue.
-
Actually all urls be listed in ALLOWED_ORIGINS are correct, dns cache poisoning issues in my country should be one of the reasons...
-
看了你之前的post，似乎是因為你的u盤的guid被列入黑名單了，試試換個新U盤重新做系統並插上啟動服務器，再從你郵箱裡找出購買成功那封電郵，複製註冊密鈅的地址，登入unraid webui 並前往 "tool >> registration >> install key >> key file url" 粘貼密鈅地址，然後點擊右邊的 "install key" 重新激活。（如果一年內沒有更換過U盤，系統會自動把key跟新的guid綁定，並將原guid作廢）
-
Hi @ljm42, I've got this issue yesterday, too... I've tried restarting api for several times, and reboot unraid... but not working, either... Finally, I've reset all devices including fiber gateway, router, switch at the same time, then restart api again, it's back. I believed that should mostly be caused by dns cache poisoning issues in some places or countries (like country R.P.C. where I am living in).
-
Hi @Azir，順便講一句：Unraid 6.10之後版本已經去掉了模板倉庫功能。。。暫時只能手動添加到./template-repos
