pallalino

I found the root cause where I couldn't open it in Firefox.... Under settings - data protection & security - local network Firefox was disabled. I have no glue what/how this was changed.

I reinstalled some dockers and figured the following out: I can access the webui from a Windows system as well as from Mac using Safari but not with Firefox. But laos when I use Safari I can't open e.g. Vaultwarden (database mariadb and Nginx-Proxy are installed). I don't use a proxy and deleted the cache for Firefox. I restored complete config fodler from flash usb now. Access from Mac/Safari is fine, only isse with Firefox now. So, it's a local issue now not related to Unraid. I also removed AVG (anti virus, protection) on the mac, as I thought this might block someting, but it wasn't

Recreated USB Stick is now booting fine into WebUI. do I need to copy plugins one by one now and same for dockers? I assume unsaid must be stopped then…this will take time if I do it one by one… Is there a doc somewhere about all folders etc? thank you

I use port 5000, it was running fine (until last week)

attached nas-diagnostics-20250414-1459.zip

Hi all, when I started to save a new password in my locally hosted bitwarden, I reconized that I can't open Unraid webui. At this point in time I was still connected to shares. I thought it might be related to expired certificates etc. but they are still valid. Then I wnated to connect a monitor and keyboard and by mistake I unplugged the power cable... After root boot, still no webui and also no access to shares anymore. I checked the IP, which is still fine. There are no errors visible to me on the Unraid monitor; when booing to Unraid webui (on the unraid server) I can access the UI. server was shutdown, but also after retsart of unraid the webui from my other Mac is still now showing up. SSH is also not working, but here I'm not sure if it was runnifn before. I have the diagnostic file. What coudl I check / do now? Thank you

👓oh my god... thank you, already read uNmount

unmount command is not available, I rebooted Unraid. It was only for testing, I don't do this typically...

I see many error messages in Unraid log (every seocnd the same...) Mar 12 15:37:14 nas emhttpd: error: malloc_share_locations, 7936: Operation not supported (95): getxattr: /mnt/user/MacMini this is the share I mounted manually. I can't find the unmount command in Unraid... any idea?

Thank you, it's working now! There must have been some changes as I hadn't this setting before.

Hi, I had to setup a new MacMini and need therefore to create a SMB connection again. But I'm not able to get it running. I tried the following where I think in the meantime it's not related to the unassigned devices plugin, but maybe someone has a hint for me: 1. In Unraid: Add remote SMB share (enabled in Unraid). Enter IP address, user name (small and capital letters tried), password, domain empty. Press button „Load shares“: nothing found. I enter name of a shared forder manually (confirmed on MacMini with „sharing -l“ that the folder is shared and name is correct). Success message is shown. Pressing on button „Mount“. Fail. Log: Mar 12 13:18:19 nas kernel: CIFS: Status code returned 0xc000006d STATUS_LOGON_FAILURE Mar 12 13:18:19 nas kernel: CIFS: VFS: \\192.168.178.61 Send error in SessSetup = -13 I found some hints, that it could be related to wrong user/password. Therefore, I wrote user name with capital letters, but result is he same. PW is correct. 2. When I try to mount the folder manually in a Uraid terminal window: mount.smb3 //192.168.178.61/Dokumente /mnt/user/MacMini/ -o user=xxxx (folder MacMini created before in Unraid, SMB enabled), password is requested. After entering PW I get the message „mount error(13): Permission denied“. On MacMini I listen to the log via „sudo log stream --predicate 'process == "smbd"' –info“ in parallel, I get two error messages: smbd: [com.apple.smb:default] transact: gss_accept_sec_context: major_status: 0xd0000, minor_status: 0xa2e9a74a smbd: [com.apple.smb:default] smb2_dispatch_session_setup: session_setup_transact status: 0xc000006d Here I found somewhere that the date/time between Uraid and MacMini could be off. But this isn’t the case. I don't know what to do now... Thank you

I want to remove empty pages when I scan in double-side mode. So far, a script which I took from here is running fine. It works for me with regular white paper. When I scan recycled paper (e.g. german tax letter), it fails as on each page the color code sum is check and interpreted in this case as a page with some content; but this is an exceptional case as most is on regular white sheets. If I want to call it as discussed there as well with the very elegant way to call a pre-consumption.sh file and from there (potentially) more than one other files, is not working. It's also not working for me to call python files (which I would prefer).

Hi all, I'm trying to use the paramter PAPERLESS_PRE_CONSUME_SCRIPT to run a python script. Has someone this up and running? I think the script is called when I created the path in the same manner as above form SOULV1C described. But even a dummy script which just prints something is causing an error: [2023-09-14 21:22:19,269] [INFO] [paperless.consumer] Executing pre-consume script /usr/src/paperless/scripts/info.py [2023-09-14 21:22:19,293] [ERROR] [paperless.consumer] Error while executing pre-consume script: [Errno 8] Exec format error: '/usr/src/paperless/scripts/info.py' Traceback (most recent call last): File "/usr/src/paperless/src/documents/consumer.py", line 214, in run_pre_consume_script completed_proc = run( File "/usr/local/lib/python3.9/subprocess.py", line 505, in run with Popen(*popenargs, **kwargs) as process: File "/usr/local/lib/python3.9/subprocess.py", line 951, in __init__ self._execute_child(args, executable, preexec_fn, close_fds, File "/usr/local/lib/python3.9/subprocess.py", line 1837, in _execute_child raise child_exception_type(errno_num, err_msg, err_filename) OSError: [Errno 8] Exec format error: '/usr/src/paperless/scripts/info.py' Any idea...? Thanks

Hi, this is working fine for me, but I was wondering why not a single path variable for PAPERLESS_TRASH_DIR would be working?

I changed it....it's now working fine. Thank you

Port 443 is not used in another docker. I only find this port for unRAID, but ssl is not enabled, too. Should I still change the ports to 5000/5001? Strange is, that I haven't changed/installed somethign new recently, only updated all dockers etc.

Hi, I've receicently upgraded to Unraid 6.12.0 and now I recognize that my Vaultwarden (only locally) is no longer running. DB docke ris started and I also tried to start Nginx-Proxy-Manager-Official (where I've forgotten that this is needed for Vaultwarden). I upgraded Nginx to the latest version now, too. When I start the docker a popup appears: " Execution error Server error" Afterwards I changed the network type to a different entry and then back to the previous one but in both cases I get the following message: -- Removing container: Nginx-Proxy-Manager-Official Successfully removed container 'Nginx-Proxy-Manager-Official' Command executiondocker run -d --name='Nginx-Proxy-Manager-Official' --net='nasnet' -e TZ="Europe/Berlin" -e HOST_OS="Unraid" -e HOST_HOSTNAME="nas" -e HOST_CONTAINERNAME="Nginx-Proxy-Manager-Official" -e 'DB_SQLITE_FILE'='/data/database.sqlite' -l net.unraid.docker.managed=dockerman -l net.unraid.docker.webui='http://[IP]:[PORT:81]' -l net.unraid.docker.icon='https://nginxproxymanager.com/icon.png' -p '81:81/tcp' -p '1880:80/tcp' -p '443:443/tcp' -p '3000:3000/tcp' -v '/mnt/user/appdata/Nginx-Proxy-Manager-Official/data':'/data':'rw' -v '/mnt/user/appdata/Nginx-Proxy-Manager-Official/letsencrypt':'/etc/letsencrypt':'rw' -v '/tmp/Nginx-Proxy-Manager-Official/var/log':'/var/log':'rw' --memory=1G --no-healthcheck 'jc21/nginx-proxy-manager' WARNING: Your kernel does not support swap limit capabilities or the cgroup is not mounted. Memory limited without swap. c5b435d10b345c7f7c50f0e544899c76432501c76142950a74e49a4efc402a84 docker: Error response from daemon: driver failed programming external connectivity on endpoint Nginx-Proxy-Manager-Official (7dc6fe7dbfef257df73e8e872aa05f22ef768e5a91eb77520dcbf0d7f32ee77c): Error starting userland proxy: listen tcp4 0.0.0.0:443: bind: address already in use. The command failed. --- Any idea what I could do to solve the issue? Thank you

I was able to create the certificate, but I struggle to connect it with vaultwarden. In the video it's working as it's calling the docker manually but I use it in unraid. Do I need to import the certificate into swag? I've imported it in Firefox, but this is not sufficient.

Thank you! German is fine for me I will check it and provide you some feedback.

Hi all, I'm more or less new on unraid. I would like to use vaultwarden initially only with local access in my LAN. I struggle now how to continue to get https enabled. Do I really need to install swag? With cloudfare etc.? Is there somewhere a description how to get vaultwarden up and running locally? thanks & regards Pallalino