rfischer1984

Oh ok, I will. there are no smart errors on it. That would make sense. Not sure why it never messed up on the older version of Unraid. But it makes sense that it writes just fine to the cache drive, but not the array disks. It is probably trying to write to disk 3 maybe.

Around the time of the error these errors occured. Sep 18 20:57:36 FischersMedia kernel: BTRFS warning (device md3): md3 checksum verify failed on 450625536 wanted 39C8DAEA found CF6E462F level 0 Sep 18 21:08:12 FischersMedia kernel: ata10.00: exception Emask 0x10 SAct 0x0 SErr 0x400000 action 0x6 frozen Sep 18 21:08:12 FischersMedia kernel: ata10.00: irq_stat 0x08000000, interface fatal error Sep 18 21:08:12 FischersMedia kernel: ata10: SError: { Handshk } Sep 18 21:08:12 FischersMedia kernel: ata10.00: failed command: WRITE DMA EXT Sep 18 21:08:12 FischersMedia kernel: ata10.00: cmd 35/00:00:30:92:40/00:02:22:00:00/e0 tag 26 dma 262144 out Sep 18 21:08:12 FischersMedia kernel: res 50/00:00:6f:65:db/00:00:21:00:00/e0 Emask 0x10 (ATA bus error) Sep 18 21:08:12 FischersMedia kernel: ata10.00: status: { DRDY } Sep 18 21:08:12 FischersMedia kernel: ata10: hard resetting link Sep 18 21:08:12 FischersMedia kernel: ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Sep 18 21:08:12 FischersMedia kernel: ata10.00: configured for UDMA/133 Sep 18 21:08:12 FischersMedia kernel: ata10: EH complete Sep 18 22:04:25 FischersMedia kernel: BTRFS warning (device md3): md3 checksum verify failed on 22380544 wanted 1D6EB673 found 7DA15F35 level 0 Sep 18 22:04:25 FischersMedia kernel: BTRFS: error (device md3) in btrfs_finish_ordered_io:3088: errno=-5 IO failure I will get the Diagnostic.zip file when it happens again.

Oh ok, I am sorry. I will upgrade again. and do that. Cuz I will get this error again. It seems to happen when something is being transcoded though. I will attach that zip when I have the problem again. I do have a log zip that i downloaded.

lol. well truth is. I followed instructions on flashing it. Thinking that may have worked. but I think i may have bricked it. lol. So I just threw it away lol Thanks for all of the help though.

Well it worked before on my older server. It is old anyways and I didn't give a ton for it. bought it used on ebay. I had it originally for freenas but made the switch to unraid about a couple years ago. It has worked fine with unraid. I am just gonna throw it away and purchase a sata card for additional drives. I only have 6 sata ports on the motherboard but I have 10 drives total. Hopefully that works out for me.

I just upgraded my processor and mb to a ryzen 2500g and ab350 pro4 mother board. I have a dell perc h310 raid card I was using before, and now my drives arent detected in unraid. I changed about everything possible in the bios. It shows the raid card when it boots and even shows 8 drives. When I go into the raid card configuration, it shows all of the drives. So they are detected. But why is unraid not detecting them? It has me a little confused.

well i spoke too soon, it acted up again last night. I think im about to just wipe the drive clean, and start from scratch.

Ok it has been up for 3 days so far. There were errors on the flash drive. I will see how long it will stay up. Seems to have fixed the issue.

Your syslog has: so there is still a file in /boot/plugins. However, it appears to be empty, maybe because your flash drive is not writeable: Put it in your PC and run checkdisk Ok I will try this when i get home from work. It started when I updated crashplan but i have crashplan on another unraid server and its working fine. My plex and everything stops working when this problem happens.

the add on web gui? you mean dynamix? If so, then i have aledy done that and it still messes up.

I am still having issues with this. I attached my syslog. syslog-2014-04-30.txt

oh ok, thanks I never had any issues before until i upgraded to 5.05. Thanks

Yeah I rebooted before i sent that syslog. I did remove a lot of plugins before you replied to this. I will try and see if its still working. Basically all i use it for is crashplan and plex. I did not need most of those plugins to begin with. Thanks for your help. When I get off work, I will send you the information you requested.

here you go. syslog_copy.txt