Szene

Exactly, it was started on Thursday and completed on Saturday. Before I started it on Thursday there was only the one Parity-Sync entry from the 18th. Im running the current latest stable version 6.12.11. But it's a good information that the time beeing displayed in the history should be the finishing time. If we can't find aynthing wrong in the first glance then I think I can wait to see if it also happens to scheduled checks. My next one would be in Oktober. It seemed just really strange to me.

Is it normal that when I have the "Use increments for manual Parity Check:" set to "No" that I still get an log entry in the history? The Parity-Check at the bottom of the screen is the one I had started manually on Thursday which finished today on Saturday, but as you can see I got a second entry from the plugin a few minutes later. Why do I have 2 entrys for the same check? I doubt that 2 checks can run at the same time, or? Speeds at the beginning are around 280MB/s but they drop to 5-90MB/s at around 20TB. parity.check.tuning.progress.save parity-checks_from_config.log parity-checks_from_plugin.log

I would be interessted in an setting to change the export location to another drive then the flash drive as well, as I want to limit the wear of it as much a possible. Can't it just check if the configured location is available or not and just use it if it's existing? So for example if it's not existing it should just treat it as like the automatic report was disabled to doge some potential bugs. On top of that, how does it look regarding a retenetion of the exports? Are they never cleared and just pile up, do we need to create additional scripts that deal with it or how can I understand that? I can't find any mentions regarding this. Do I really need those automatic exports anyway, or are the manuall exports sufficient? I can't rap my head around how critical it is to have the latest export if some files are defective. Do I see all corrupted files if I do a manual export after the plugin reported issues even if the last export was months behind? There is no clear spesification on all of that as far as I understood on basis of my reasearch in this thread. I just don't want to bombard my flash drive with unnecessary data that cause more harm then good over a long time.

Sorry, I didn't knew that. Thanks for the clarification. Sadly my issue still persist. Any idea what could cause the significant speed drop when the drivers are installed? My goal would be for the speed not to drop and to keep the higher C-states. Or is this just not possible? Yeah, Mbit/s With (C8) [ 4] 0.00-1.00 sec 45.6 MBytes 383 Mbits/sec [ 4] 1.00-2.00 sec 46.5 MBytes 390 Mbits/sec [ 4] 2.00-3.00 sec 45.9 MBytes 385 Mbits/sec [ 4] 3.00-4.00 sec 47.8 MBytes 401 Mbits/sec [ 4] 4.00-5.00 sec 49.8 MBytes 417 Mbits/sec [ 4] 5.00-6.00 sec 46.4 MBytes 389 Mbits/sec [ 4] 6.00-7.00 sec 47.4 MBytes 397 Mbits/sec [ 4] 7.00-8.00 sec 47.2 MBytes 396 Mbits/sec [ 4] 8.00-9.00 sec 45.5 MBytes 382 Mbits/sec [ 4] 9.00-10.00 sec 47.8 MBytes 401 Mbits/sec Without (C3) [ 4] 0.00-1.00 sec 269 MBytes 2.26 Gbits/sec [ 4] 1.00-2.00 sec 278 MBytes 2.33 Gbits/sec [ 4] 2.00-3.00 sec 281 MBytes 2.36 Gbits/sec [ 4] 3.00-4.00 sec 280 MBytes 2.35 Gbits/sec [ 4] 4.00-5.00 sec 282 MBytes 2.36 Gbits/sec [ 4] 5.00-6.00 sec 282 MBytes 2.37 Gbits/sec [ 4] 6.00-7.00 sec 281 MBytes 2.36 Gbits/sec [ 4] 7.00-7.71 sec 199 MBytes 2.37 Gbits/sec Same connection, just with and without drivers. Edit: I just saw that 6.12.10 reverted the kernel back to v6.1.79 and the newest release from this plugin was compiled for version v6.8.12. Could that be the issue?

Hi, it there currently an issue with r8125 and 6.12.10? If I install it I'm only seeing half the speed of an GbE connection even if I'm connected to an 2.5GbE connection. It doen't matter if I turn ASPM on or leave it off. When I uninstall the driver it defaults back to the r8169 and I get my 2.5GbE connections speeds just fine, but then I can't enable ASPM. I can see the last version for r8125 is from the 4th of April 2024, is there a potential newer version? Currently I can decide between 2 option: No Plugin: C3 but 2.5GbE speeds With Plugin: C8 but around 300-450Mb/s Both aren't great. I also tried to disable EEE, but that didn't change anything.