phirephoto

Hi, I'm connected via tailscale VPN remotely to my home network . I'm not sure if this ever worked but I have a Pihole IP on a bridge network IP 192.168.1.213. From home, I can ping and connect to it fine. But when I'm remote and connected via tailscale, I cannot ping it or access it. I use my Unraid as a exit node. I've tried with and without use tailscale subnet. Should I be able to access my PiHole bridged IP over tailscale? Any tricks? I do see a option in Docker -> Unbound "Use tailscale - it's defaulted off. Does this need to be on? Will that fix it - but will it cause issues using pihole on my home computers (where I don't use tailscale?) Thanks.

Hi, So wondering why Unraid can't boot from the drives instead of a USB stick? I'm not a programmer so maybe it just won't work, but what I forsee is: Each drive is a boot drive - or at least capable of booting. Any changes are written to each drive. BIOS would be set up to boot from each drive - shouldn't matter what order, but boot from each drive such that if Drive 1 failed, BIOS should boot from drive 2 automatically. Granted there's not a huge disadvantage to using a USB drive (except a few things I've seen where if you want a sort of non official change to be made, you have to do some tinkering since some 'changes' not made to the USB stick will be lost upon reboot). Like for example I wanted to change my prompt to Powerlevel10k - but it's not straightforward on Unraid as it is on any other o/s. Is that on the roadmap? Just curious. Thanks!

I set unraid network settings to be 8.8.8.8 and 4.2.2.2 and still seeing the same symptoms... What I don't get is why unraid starts becoming unresponsive on the LAN IP...?

Hello All. I'm trying to set up pihole and tailscale and get them to play nicely. My Unraid on the lan is 192.168.1.195. My pihole is br:custom 192.168.1.213 . My router is 192.168.1.1 . Ideally I'd like my unraid to use the pihole for DNS - My router is configured to use 192.168.1.213 for DNS So here's where I'm at a loss for settings wise. I have to have something wrong or the wrong combination: Tailscale Outbound Networking: Use Tailscale Subnets & Use Tailscale DNS Settings. Then on the Tailscale Admin: DNS setings: Global NameServers: (Override Local DNS? Use Magic DNS? ) The problem I'm having is with every combination I've tried (I'm hopefully missing one that someone knows and it's sobvious to an expert): DNS won't resolve remotely when connected to tailscale. From a remote machine, Nslookup - <Enter> and searching for DNS doesn't resolve, and shows my name server as 100.100.100.100. When I finally DID get it to resolve - if I recall it waws when I enabled use tailscale subnets and use tailscale DNS Settings (on the Unraid -> Settings -> Tailscale -> Advanced Settings), I 'lost' access to 192.168.1.195 on the LAN - I could then only access my unraid on the LAN if I had tailscale installed and used the 100.x private IP. Any hints MUCH appreciated. Thanks

So now, I reinstalled Tailscale. It comes up and says I need to reauthenticate. I reauthenticate, and close out, and refresh unraid, says I need to reauthenticate. Removed tailscale. Reinstalled tailscale. Same thing. Disabled key expiry, but still it keeps saying I need to reauthetnticate. Attached logs from Unraid / tailscale. Thanks! tailscale.txt

Loaded US drive on alternate PC, removed all folders named Tailscale. Back in business. I am often thou seeing - I want to say "Failed to enumerate USB device" ? Upon boot - after it's run a number of processes but before it's fully loaded. Power cycle generally fixes it? Any ideas?| Thanks!

Not available on unraid connect for some reason

Hi all - So I'm not sure WHAT I did but I was trying to get tailscale to work, and it went downhill. I finally got it to work, but when I got home (I was at work and VPN'd in), I could no longer access my unraid. Could not ping the LAN IP of the Unraid. After trying a few things, I COULD get in to the tailscale IP of the unraid - 100.x.x.x . I went in to tailscale, and found a setting - something along the lines of "Allow unraid access via tailscale IP" or something - I disabled it figuring it would allow me to have back access to unraid via LAN (192.168;.x.x) - but it didn't. It then disabled my access to unraid via the tailscale IP. I can't ping unraid via LAN or tailscale, but near as I can tell, my DHCP server has handed it an IP, and I am getting the Fix Common Problems e-mail when it ran, so it IS online just not pingable, and cannot access via SSH either. It's in a place where it's headless, and the only real monitor is a tiny screen, so ideally, can I pull the USB drive and (I have acess to a MAC or a PC, but prefer PC) can I access the USB boot device and disable tailscale? Or any other suggestions - maybe some how reset most settings but keep all my shares and dockers intact? Or any other suggestions on what to try? Not sure how else to access it. If it matters - I'm running (I believe) the latest Beta but obviously I'm not sure how to tell you what version since I can't access it :-D Thanks

So removing the mover plugin seems to have resolved it...

Here's my logs.. all shares are set as cache -> array DISK2 Ddomains DRIVE DropBox isos system timemachine tower-diagnostics-20241007-1317.zip

tower-diagnostics-20241007-1036.zipBefore I reboot.. do you see what's taking a literal 45 minute startup time? Any time I reboot, it takes 30-45 minutes for the unraid to come back online. Rebooted yesterday at 2 PM, it was 2:45 before it came back online? Hoping to maybe fix that before I do this reboot again. THanks

Yes.. I even just downgraded to beta 2 and ran a manual move, but nothing's moving.. 65 kb free on the cache drive

I tried rm /usr/local/sbin/move ln -s /usr/libexec/unraid/move /usr/local/sbin/move in /boot/config/go and even ran the command manually, but my mover appears broken. My cache drive is 100% full and I cannot write to any shares that are cache -> array ....

Ok it looks to me like data IS stuck on the share... Before I delete it, want to get a input so I don't screw anything up. My computers - I see the cacheshare and I had a folder called ROMS. That folder no longer 'exists' as far as my computers see - ie \\IP\CACHESHARE\roms . BUT /mnt/cache/DRIVE/roms - I see the files. DRIVE is my NAS share (cache -> array). I moved the files from \\IP\cacheshare\roms to \\ip\drive\roms. But in /mnt/cache/drive/roms is 650GB. Can I mv these files manually?