dpc2

That sorted it. Thank you! I deleted the "previous" folder and installed the plugin. This time there was an extra line which hadn't appeared before about the driver being installed, and the process took a few minutes longer. Then the red docker warning box appeared and all was well. Thanks again for troubleshooting. After setting up the driver Plex was still not using HW transcoding. I found in the Plex transcode settings that I had added a transcode directory a few years ago. I think that was to enable RAM transcoding. I deleted that directory reference and the GPU is now doing all transcoding. Noting that here in case anyone else has the same issue.

I'll take another look tonight, but I'm thinking it must be a space issue on the USB Boot Device. It's only 1GB and I've had the same one for years. It's probably near 70-80% full, so that may be preventing the install. I previously tried clicking on Update and trying to Download a new driver, but without success. And I do have a PfSense router with pfBlockerNG installed for adblocking.

Yes, I have waited for the "Done" each time. Don't think I have cut it short. It is not present on the Plugin page and there is no error message. It also doesn't show up as an Installed App in Apps. I reread Page 1 and I don't get the red box regarding the docker restart. So something must be short-circuiting the install, despite the driver showing up in Settings (until I reboot). Attached is what the Driver Package looks like.

Sorry about that! Don't usually use a Mac

tower-diagnostics-20220117-1502.zip

I have just installed a Quadro P400 but can't seem to get it recognized. The Nvidia plugin installs without issue, but the card is not listed in the plugin. It is listed in its own IOMMU group. I've rebooted and reseated the card several times but have not had any change. It's also weird that the Nvidia plugin disappears every time I reboot and I have to reinstall it. I'm running 6.9.2 on a Supermicro motherboard and diagnostics are attached.

A reboot seemed to fix everything up. I also enabled "Host Access to Custom Networks" in the Docker settings, That may have helped, too.

I recently implemented Nginx for the first time and had it working, but have somehow managed to lose the ability to load either the Docker or Plugin tab on the GUI. All other tabs load without issue. I also have issues connecting to terminal, which flickers between connected and connection lost, and with My servers, which also flickers off and on with a connection error. I would play around with Nginx settings, but I can't get to them because I can't load Dockers. The last thing I recall doing was changing Nginx and two other dockers to the same docker network. A reboot might fix it, but thought I'd check here first. Running version 6.9.2 and diagnostics are attached. tower-diagnostics-20211222-0849.zip

And it was! Took a little bit of googling and fiddling with the BIOS settings (turned OPROM for PCIe slots off; had to play with NIC settings), but other than that it was smooth as could be. Up and running on a much improved platform now. Thank you for the vote of confidence!

I haven't done a major hardware upgrade for many years and am just checking in before I get started. I'm currently running: Intel core 2 quad - q9550 Gigabyte G33M-DS2R 8GB DDR2 RAM 17 data disks 2 parity disks 1 SSD cache LSI SAS9201-16e PCI Express to 6Gb/s 16-Port Adapter I'm moving to: 2x XEON E5-2620 V3 SUPERMICRO X10DRL-iT 16GB DDR4 RAM All of the same disks and SAS adapter I don't run any VMs and the primary dockers are Plex, Deluge, Sonarr, Radarr, Lidarr, NZBGET and OpenVPN. I have backed up my flash drive and appdata, printed out the main, dashboard, and docker screens, and made sure everything is currently working as it should be. Will likely be taking the plunge on Wednesday and swapping out the MBD, CPU and RAM. Anything else I need to do or be concerned about before I make the switch? Figured for once in my Unraid life I would ask the question before I have an issue! Thank you! David

Just checked and I have the same issue when trying to copy something to an Unraid share from a Mac as well. Just can't do it! I don't see that any discs or shares have been made read only or anything like that, and I still have full ability to play back content from the server.

I tried moving some files from my Windows 10 PC to my Unraid server, but I don't have an option to "paste" when I right click on an Unraid folder. This kinda came out of nowhere. I as running 6.8.2 and had the issue, then upgraded to 6.8.3, rebooted both the server and the PC, but the problem persists. I have tried both File Explorer and Q-Dir, but can't move or copy files to Unraid using either one. Diagnostics below. Thank you! tower-diagnostics-20200314-1505.zip

Here is the current syslog and the latest status. Server is running and appears from the lights to be doing the monthly parity check. It had been working fine until I went to work yesterday. I came home and the GUI couldn't be accessed, Plex wouldn't connect to Tower, and File Explorer couldn't find the device. I just pulled the Unraid UBS stick and copied the Syslog. I can access the server via a keyboard and monitor. syslog 2-1-2020.txt

Understood. I will seek help there for the Plex issue. I still need help with the original problem, however, which was the server going off line and losing all access via internet or direct.

Okay, syslog is now writing to Flash. Diagnostics attached here. Now I have a new issue -- the Plex Docker is no longer installed. I haven't touched any configurations since these issues began, and I have no idea why it would uninstall. tower-diagnostics-20200118-2026.zip

I have been struggling to keep my server online, and could use help diagnosing the issue. In a nutshell: - It boots up and seems to work fine. I can watch media via Plex, but the one issue has been that large files often time out when I transfer them to the server. - After a few days to a week I can no longer reach the server via the web GUI, File Explorer, Plex, or any other way. The odd thing is that I also lose the video signal to the dedicated monitor, so I truly lose all access. The server is on now, but I can’t access. Is there anyway I can capture the diagnostics for the current situation after I reboot? If not, is there a a command or setting I can use after a reboot to make sure I have the logs after it crashes again? Would really appreciate help figuring this out. Seems like it could be a network or NIC issue, but then why would I lose direct access via the monitor?

Thank you, Johnnie. Running the rebuild now and am confident that all will be good. Will also change out the controller.

I've ordered an LSI and will install it next week. In the meantime, I hadn't powered down the server and my monthly parity check (with corrections on) kicked off overnight. I stopped the check at the 8 hour mark, powered down, checked all cables, and powered up again. Now running an extended SMART test on the disabled drive. My question is, should I try to rebuild the disabled disc, or should I try to re-enable it as is and then check parity? I'm afraid that my parity is no longer valid since it ran with a disc disabled (and had millions of errors). On the other hand, data on the disabled disk may have errors because it was disabled due to a write error. I wonder which path is the lesser of two evils. Seems like I could lose a bit of data either way.

I've been having issues for the last week where I get an error that 5 disks have read errors. I reboot and all is well. Today I got that message plus my Disc 2 has been disabled. This may be a cabling or SASLP problem, but I haven't touched anything or rebooted. What's the best way to proceed from here? Diagnostics attached below. Running 6.7.2 tower-diagnostics-20190627-2100.zip Thank you!

Got it. Thank you!

That worked. I'm all good now.

I want to try adding a Windows VM to my server, but I don't have any of these shares installed: /iso /domain /system I read those are supposed to be installed automatically by Unraid, but I have never had them. Is there anything "special" about the settings for each, or can I just add them myself with default settings. Running 6.7.0

So I should be good to Powerdown, reseat the card and secure all cables, and then restart the server?

I changed out the CPU cooler on my server yesterday, so I was monkeying around inside the case. It booted up and played music over Plex for a couple of hours and I had no issue. Then Plex crashed and I got a notification that 5 discs have read errors. I think it's probably a cable issue with SAS-Sata cabling, but thought I would upload my diagnostics to you kind folks before I touch anything. No red x's yet because I haven't touched a thing, Zip file and screen shot attached. Running UnRaid 6.7.0. Thank you! tower-diagnostics-20190521-1256.zip

An issue has just popped up that I can't figure out. I can't copy files from my Win 10 desktop to my Unraid share using Windows Explorer. I get the error: "The disk is write-protected. Remove the write protection or use another disk." I can however copy directly to a share folder on an Unraid disk. So I can't copy to Hi Def Movies, but I can copy to disk8/Hi Def Movies. Running v. 6.6.7 What has gone wrong?