fonzie

Okay, so if I understand you correctly my process should be: 1. Buy new disk and preclear it 2. rebuild new precleared disk as disk 6 3. try to fix the filesystem with reiserfsck 4. use the old disk 6 which is about to fail as a backup in case some files are lost when repairing the filesystem on the new drive is this correct?

Looking at the SMART report I'm finding these two lines highlighted in yellow which according to my research may mean that my drive is about to or already is failing. Should I even bother with trying to rebuild the file system and likely losing some data while it tries to do so....or should I replace this drive and use my Parity to rebuild the new replacement data drive? # Attribute Name Flag Value Worst Threshold Type Updated Failed Raw Value 187 Reported uncorrect 0x0032 099 099 000 Old age Always Never 1 188 Command timeout 0x0032 100 098 000 Old age Always Never 38655492112

I got this on Disk 6: So I attempted to run the code --rebuild-tree and then I get the following page: reiserfsck 3.6.24 ************************************************************* ** Do not run the program with --rebuild-tree unless ** ** something is broken and MAKE A BACKUP before using it. ** ** If you have bad sectors on a drive it is usually a bad ** ** idea to continue using it. Then you probably should get ** ** a working hard drive, copy the file system from the bad ** ** drive to the good one -- dd_rescue is a good tool for ** ** that -- and only then run this program. ** ************************************************************* Will rebuild the filesystem (/dev/md6) tree Will put log info to 'stdout' Do you want to run this program?[N/Yes] (note need to type Yes if you do): So I type "Yes" without the quotations and select check, but it just kicks me back to the previous page and doesn't seem do much of anything to rebuild the filesystem on it. What am I doing wrong? And according to the writing up there...I should be backing up the harddrive before doing this filesystem restore?

I have attached my full diagnostics zip. It does seem to be experiencing read-only errors. *Also, I have the inability to start up my VM due to it being read-only I think. media-diagnostics-20160111-1619.zip

Yesterday I found I have suddenly been unable to create new folders in my Movies share. I can delete existing files and view the movies but once I try to create a new folder anywhere within that share, I get a "You need permission to perform this action" notification. I haven't changed security settings or added users or anything like that. In fact, when I first got the issue last night, the first thing I did was remove all the users except root (it didn't help). I also tried running the "take ownership" command from within windows with a registry hack I found online. I ran it in the root of the Movie share, but it ran very quickly and I don't think it actually worked. Because I've run it in the past and the process usually take a while to go through all the files. I read quickly in the forums someone who had a similar issue once before, they posted their syslog and were told that it was a reiserfs problem. Most of my drives are in that format and I also have 3 drives in my array that have given me some concerns over their SMART status. Two of them have a command timeout with a number following it. And another has a command timeout in addition to a "reported uncorrect: 1" Not sure what any of this means or how it can affect me. I am planning on running a parity check tonight and hoping this all gets corrected. If anyone has any advice I would greatly appreciate it.

I got it working somehow after removing the docker and reinstalling several times. I think it had something to do with the linuxserver.io yesterday because I noticed a few of their dockers weren't installing properly. They are all good now.

NzbGet had been working properly for a few months now, until today. It just stopped responding and started shutting itself down even though I have it set to autostart. I checked the logs and it was showing an error with the username and password not matching (I have not changed them). So I backed up the config from the appdata directory and uninstalled the container and data thinking I could do a fresh install and re-input my settings. nzbget still won't start though. Here is what the log shows: ----------------------------------- GID/UID ----------------------------------- User uid: 99 User gid: 100 ----------------------------------- Ign http://mirror.cogentco.com/pub/linux/ubuntu/ trusty InRelease Get:1 http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-security InRelease [64.4 kB] Get:2 http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-updates InRelease [64.4 kB] Get:3 http://mirror.cogentco.com/pub/linux/ubuntu/ trusty Release.gpg [933 B] Get:4 http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-security/main Sources [128 kB] Get:5 http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-security/restricted Sources [3,920 B] Get:6 http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-security/universe Sources [36.5 kB] Get:7 http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-security/multiverse Sources [2,165 B] Get:8 http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-security/main amd64 Packages [495 kB] Get:9 http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-security/restricted amd64 Packages [20.2 kB] Get:10 http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-security/universe amd64 Packages [158 kB] Get:11 http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-security/multiverse amd64 Packages [4,642 B] Get:12 http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-updates/main Sources [309 kB] Get:13 http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-updates/restricted Sources [5,219 B] Get:14 http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-updates/universe Sources [183 kB] Get:15 http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-updates/multiverse Sources [5,116 B] Get:16 http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-updates/main amd64 Packages [851 kB] Get:17 http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-updates/restricted amd64 Packages [23.4 kB] Get:18 http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-updates/universe amd64 Packages [431 kB] Get:19 http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-updates/multiverse amd64 Packages [14.1 kB] Get:20 http://mirror.cogentco.com/pub/linux/ubuntu/ trusty Release [58.5 kB] Get:21 http://mirror.cogentco.com/pub/linux/ubuntu/ trusty/main Sources [1,335 kB] Get:22 http://mirror.cogentco.com/pub/linux/ubuntu/ trusty/restricted Sources [5,335 B] Get:23 http://mirror.cogentco.com/pub/linux/ubuntu/ trusty/universe Sources [7,926 kB] Get:24 http://mirror.cogentco.com/pub/linux/ubuntu/ trusty/multiverse Sources [211 kB] Get:25 http://mirror.cogentco.com/pub/linux/ubuntu/ trusty/main amd64 Packages [1,743 kB] Get:26 http://mirror.cogentco.com/pub/linux/ubuntu/ trusty/restricted amd64 Packages [16.0 kB] Get:27 http://mirror.cogentco.com/pub/linux/ubuntu/ trusty/universe amd64 Packages [7,589 kB] Get:28 http://mirror.cogentco.com/pub/linux/ubuntu/ trusty/multiverse amd64 Packages [169 kB] Fetched 21.9 MB in 10s (2,152 kB/s) Reading package lists... ----------------------------------- GID/UID ----------------------------------- User uid: 99 User gid: 100 ----------------------------------- Ign http://mirror.cogentco.com/pub/linux/ubuntu/ trusty InRelease Hit http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-security InRelease Hit http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-updates InRelease Hit http://mirror.cogentco.com/pub/linux/ubuntu/ trusty Release.gpg Hit http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-security/main Sources Hit http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-security/restricted Sources Hit http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-security/universe Sources Hit http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-security/multiverse Sources Hit http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-security/main amd64 Packages Hit http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-security/restricted amd64 Packages Hit http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-security/universe amd64 Packages Hit http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-security/multiverse amd64 Packages Hit http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-updates/main Sources Hit http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-updates/restricted Sources Hit http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-updates/universe Sources Hit http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-updates/multiverse Sources Hit http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-updates/main amd64 Packages Hit http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-updates/restricted amd64 Packages Hit http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-updates/universe amd64 Packages Hit http://mirror.cogentco.com/pub/linux/ubuntu/ trusty-updates/multiverse amd64 Packages Hit http://mirror.cogentco.com/pub/linux/ubuntu/ trusty Release Hit http://mirror.cogentco.com/pub/linux/ubuntu/ trusty/main Sources Hit http://mirror.cogentco.com/pub/linux/ubuntu/ trusty/restricted Sources Hit http://mirror.cogentco.com/pub/linux/ubuntu/ trusty/universe Sources Hit http://mirror.cogentco.com/pub/linux/ubuntu/ trusty/multiverse Sources Hit http://mirror.cogentco.com/pub/linux/ubuntu/ trusty/main amd64 Packages Hit http://mirror.cogentco.com/pub/linux/ubuntu/ trusty/restricted amd64 Packages Hit http://mirror.cogentco.com/pub/linux/ubuntu/ trusty/universe amd64 Packages Hit http://mirror.cogentco.com/pub/linux/ubuntu/ trusty/multiverse amd64 Packages Reading package lists... How can I get it back up and running? and preferably with my old config settings intact. Thanks.

Thanks for your help guys. I FTP'd to the unRAID machine and manually deleted the zoneminder folder after uninstalling the container. I re-installed the docker and re-mapped the port from 80 to 8024 and it installed properly. I have it running now.

In the unraid gui dashboard, click on the container's icon and select logs I even tried removing the container and the data and reinstalling. still didn't work. Log apache.conf already exists zm.conf already exists using existing mysql database using existing data directory using existing perl data directory creating symbolink links setting the correct local time increasing shared memory starting services * Starting MySQL database server mysqld ...done. * Checking for tables which need an upgrade, are corrupt or were not closed cleanly. * Starting web server apache2 * Starting ZoneMinder: failure

How do I check the logs? Oh and another thing. It keeps stopping itself even though I start it and have autostart set to "on"

Edit the container, don't change anything and hit save. It will recreate the container and see if that works I did just that, but it still does not work. The connection is refused. when I click the docker the browser opens the address: UnraidIPaddress:2424/zm/ that's the connection that gets refused. So I tried removing the "/zm/" from the Url and it takes me to the page:

I had Zoneminder installed for quite some time and it worked. But today I was trying to open the webui and I got the error message: "You don't have permission to access /zm on this server." I tried restarting the docker to no avail. any help would be appreciated. thanks.

I tried using IE and it worked. thanks for the tip.

I previously had this docker installed and it was working perfectly. But today I am trying to reinstall the couchpotato docker and it doesn't allow me to tick any of the boxes in the settings. I just noticed this behavior today. I tried needo's docker as well and the same issue came up. Does this have something to do with a couchpotato update and not the docker? I am just trying to get CP up and running again. thanks again for all the hard work and maintenance that goes into this.

Just want to make sure everything is fine and dandy with my new precleared hard drive. eb 25 18:10:22 media preclear_disk-diff[12877]: == invoked as: ./preclear_disk.sh -M 4 /dev/sdb Feb 25 18:10:22 media preclear_disk-diff[12877]: == ST2000DL003-9VT166 6YD1RAS4 Feb 25 18:10:22 media preclear_disk-diff[12877]: == Disk /dev/sdb has been successfully precleared Feb 25 18:10:22 media preclear_disk-diff[12877]: == with a starting sector of 64 Feb 25 18:10:22 media preclear_disk-diff[12877]: == Ran 1 cycle Feb 25 18:10:22 media preclear_disk-diff[12877]: == Feb 25 18:10:22 media preclear_disk-diff[12877]: == Using :Read block size = 8225280 Bytes Feb 25 18:10:22 media preclear_disk-diff[12877]: == Last Cycle's Pre Read Time : 5:55:52 (93 MB/s) Feb 25 18:10:22 media preclear_disk-diff[12877]: == Last Cycle's Zeroing time : 5:10:17 (107 MB/s) Feb 25 18:10:22 media preclear_disk-diff[12877]: == Last Cycle's Post Read Time : 12:40:39 (43 MB/s) Feb 25 18:10:22 media preclear_disk-diff[12877]: == Last Cycle's Total Time : 23:47:55 Feb 25 18:10:22 media preclear_disk-diff[12877]: == Feb 25 18:10:22 media preclear_disk-diff[12877]: == Total Elapsed Time 23:47:55 Feb 25 18:10:22 media preclear_disk-diff[12877]: == Feb 25 18:10:22 media preclear_disk-diff[12877]: == Disk Start Temperature: 28C Feb 25 18:10:22 media preclear_disk-diff[12877]: == Feb 25 18:10:22 media preclear_disk-diff[12877]: == Current Disk Temperature: 31C, Feb 25 18:10:22 media preclear_disk-diff[12877]: == Feb 25 18:10:22 media preclear_disk-diff[12877]: ============================================================================ Feb 25 18:10:22 media preclear_disk-diff[12877]: ** Changed attributes in files: /tmp/smart_start_sdb /tmp/smart_finish_sdb Feb 25 18:10:22 media preclear_disk-diff[12877]: ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE Feb 25 18:10:22 media preclear_disk-diff[12877]: Raw_Read_Error_Rate = 115 100 6 ok 98515096 Feb 25 18:10:22 media preclear_disk-diff[12877]: Spin_Retry_Count = 100 100 97 near_thresh 0 Feb 25 18:10:22 media preclear_disk-diff[12877]: End-to-End_Error = 100 100 99 near_thresh 0 Feb 25 18:10:22 media preclear_disk-diff[12877]: Airflow_Temperature_Cel = 69 72 45 near_thresh 31 Feb 25 18:10:22 media preclear_disk-diff[12877]: Temperature_Celsius = 31 28 0 ok 31 Feb 25 18:10:22 media preclear_disk-diff[12877]: Hardware_ECC_Recovered = 36 100 0 ok 98515096 Feb 25 18:10:22 media preclear_disk-diff[12877]: No SMART attributes are FAILING_NOW Feb 25 18:10:22 media preclear_disk-diff[12877]: Feb 25 18:10:22 media preclear_disk-diff[12877]: 0 sectors were pending re-allocation before the start of the preclear. Feb 25 18:10:22 media preclear_disk-diff[12877]: 0 sectors were pending re-allocation after pre-read in cycle 1 of 1. Feb 25 18:10:22 media preclear_disk-diff[12877]: 0 sectors were pending re-allocation after zero of disk in cycle 1 of 1. Feb 25 18:10:22 media preclear_disk-diff[12877]: 0 sectors are pending re-allocation at the end of the preclear, Feb 25 18:10:22 media preclear_disk-diff[12877]: the number of sectors pending re-allocation did not change. Feb 25 18:10:22 media preclear_disk-diff[12877]: 0 sectors had been re-allocated before the start of the preclear. Feb 25 18:10:22 media preclear_disk-diff[12877]: 0 sectors are re-allocated at the end of the preclear, Feb 25 18:10:22 media preclear_disk-diff[12877]: the number of sectors re-allocated did not change. preclear.results.txt

Awesome. Thanks Joe!

I ran a preclear on my drive and it seems to have passed...I just need someone to verify that all is well. thanks preclear_results.txt

I found the full preclear results thanks to the above post by Joe L. Is everything fine? Disk: /dev/sdg smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: ST2000DL003-9VT166 Serial Number: 5YD69HTY Firmware Version: CC32 User Capacity: 2,000,398,934,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Tue Nov 15 21:57:12 2011 PST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 612) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x30b7) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 114 100 006 Pre-fail Always - 70588808 3 Spin_Up_Time 0x0003 093 093 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 7 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 100 253 030 Pre-fail Always - 193273872698 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 25 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 7 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 058 057 045 Old_age Always - 42 (Lifetime Min/Max 26/43) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 6 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 7 194 Temperature_Celsius 0x0022 042 043 000 Old_age Always - 42 (0 26 0 0) 195 Hardware_ECC_Recovered 0x001a 036 025 000 Old_age Always - 70588808 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 178631984807961 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 3889415671 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 3479408396 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

I just precleared my hard drive through putty with screen. This is what it says: == with a starting sector of 64 ============================================================================ ** Changed attributes in files: /tmp/smart_start_sdg /tmp/smart_finish_sdg ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE Raw_Read_Error_Rate = 114 100 6 ok 70588808 Spin_Retry_Count = 100 100 97 near_thresh 0 End-to-End_Error = 100 100 99 near_thresh 0 Airflow_Temperature_Cel = 58 64 45 near_thresh 42 Temperature_Celsius = 42 36 0 ok 42 Hardware_ECC_Recovered = 36 100 0 ok 70588808 No SMART attributes are FAILING_NOW 0 sectors were pending re-allocation before the start of the preclear. 0 sectors were pending re-allocation after pre-read in cycle 1 of 1. 0 sectors were pending re-allocation after zero of disk in cycle 1 of 1. 0 sectors are pending re-allocation at the end of the preclear, the number of sectors pending re-allocation did not change. 0 sectors had been re-allocated before the start of the preclear. 0 sectors are re-allocated at the end of the preclear, the number of sectors re-allocated did not change. is this enough information to know if the drive is fine or do you require more? thanks in advance.

I'm running unRAID 4.7 and using preclear script v1.8. How do I read the results? I'm using a 2TB Hitachi 5k3000, ran preclear as MBR: unaligned because I read that these drives are NOT advanced format. ar 20 02:06:35 media preclear_disk-diff[4291]: ============================================================================ Mar 20 02:06:35 media preclear_disk-diff[4291]: == Mar 20 02:06:35 media preclear_disk-diff[4291]: == S.M.A.R.T Final Report for /dev/sde Mar 20 02:06:35 media preclear_disk-diff[4291]: == Mar 20 02:06:35 media preclear_disk-diff[4291]: Disk: /dev/sde Mar 20 02:06:35 media preclear_disk-diff[4291]: smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build) Mar 20 02:06:35 media preclear_disk-diff[4291]: Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Mar 20 02:06:35 media preclear_disk-diff[4291]: Mar 20 02:06:35 media preclear_disk-diff[4291]: === START OF INFORMATION SECTION === Mar 20 02:06:35 media preclear_disk-diff[4291]: Device Model: Hitachi HDS5C3020ALA632 Mar 20 02:06:35 media preclear_disk-diff[4291]: Serial Number: ML0220F30PTZND Mar 20 02:06:35 media preclear_disk-diff[4291]: Firmware Version: ML6OA580 Mar 20 02:06:35 media preclear_disk-diff[4291]: User Capacity: 2,000,398,934,016 bytes Mar 20 02:06:35 media preclear_disk-diff[4291]: Device is: Not in smartctl database [for details use: -P showall] Mar 20 02:06:35 media preclear_disk-diff[4291]: ATA Version is: 8 Mar 20 02:06:35 media preclear_disk-diff[4291]: ATA Standard is: ATA-8-ACS revision 4 Mar 20 02:06:35 media preclear_disk-diff[4291]: Local Time is: Sun Mar 20 02:06:33 2011 PDT Mar 20 02:06:35 media preclear_disk-diff[4291]: SMART support is: Available - device has SMART capability. Mar 20 02:06:35 media preclear_disk-diff[4291]: SMART support is: Enabled Mar 20 02:06:35 media preclear_disk-diff[4291]: Mar 20 02:06:35 media preclear_disk-diff[4291]: === START OF READ SMART DATA SECTION === Mar 20 02:06:35 media preclear_disk-diff[4291]: SMART overall-health self-assessment test result: PASSED Mar 20 02:06:35 media preclear_disk-diff[4291]: Mar 20 02:06:35 media preclear_disk-diff[4291]: General SMART Values: Mar 20 02:06:35 media preclear_disk-diff[4291]: Offline data collection status: (0x84)^IOffline data collection activity Mar 20 02:06:35 media preclear_disk-diff[4291]: ^I^I^I^I^Iwas suspended by an interrupting command from host. Mar 20 02:06:35 media preclear_disk-diff[4291]: ^I^I^I^I^IAuto Offline Data Collection: Enabled. Mar 20 02:06:35 media preclear_disk-diff[4291]: Self-test execution status: ( 0)^IThe previous self-test routine completed Mar 20 02:06:35 media preclear_disk-diff[4291]: ^I^I^I^I^Iwithout error or no self-test has ever Mar 20 02:06:35 media preclear_disk-diff[4291]: ^I^I^I^I^Ibeen run. Mar 20 02:06:35 media preclear_disk-diff[4291]: Total time to complete Offline Mar 20 02:06:35 media preclear_disk-diff[4291]: data collection: ^I^I (23475) seconds. Mar 20 02:06:35 media preclear_disk-diff[4291]: Offline data collection Mar 20 02:06:35 media preclear_disk-diff[4291]: capabilities: ^I^I^I (0x5b) SMART execute Offline immediate. Mar 20 02:06:35 media preclear_disk-diff[4291]: ^I^I^I^I^IAuto Offline data collection on/off support. Mar 20 02:06:35 media preclear_disk-diff[4291]: ^I^I^I^I^ISuspend Offline collection upon new Mar 20 02:06:35 media preclear_disk-diff[4291]: ^I^I^I^I^Icommand. Mar 20 02:06:35 media preclear_disk-diff[4291]: ^I^I^I^I^IOffline surface scan supported. Mar 20 02:06:35 media preclear_disk-diff[4291]: ^I^I^I^I^ISelf-test supported. Mar 20 02:06:35 media preclear_disk-diff[4291]: ^I^I^I^I^INo Conveyance Self-test supported. Mar 20 02:06:35 media preclear_disk-diff[4291]: ^I^I^I^I^ISelective Self-test supported. Mar 20 02:06:35 media preclear_disk-diff[4291]: SMART capabilities: (0x0003)^ISaves SMART data before entering Mar 20 02:06:35 media preclear_disk-diff[4291]: ^I^I^I^I^Ipower-saving mode. Mar 20 02:06:35 media preclear_disk-diff[4291]: ^I^I^I^I^ISupports SMART auto save timer. Mar 20 02:06:35 media preclear_disk-diff[4291]: Error logging capability: (0x01)^IError logging supported. Mar 20 02:06:35 media preclear_disk-diff[4291]: ^I^I^I^I^IGeneral Purpose Logging supported. Mar 20 02:06:35 media preclear_disk-diff[4291]: Short self-test routine Mar 20 02:06:35 media preclear_disk-diff[4291]: recommended polling time: ^I ( 1) minutes. Mar 20 02:06:35 media preclear_disk-diff[4291]: Extended self-test routine Mar 20 02:06:35 media preclear_disk-diff[4291]: recommended polling time: ^I ( 255) minutes. Mar 20 02:06:35 media preclear_disk-diff[4291]: SCT capabilities: ^I (0x003d)^ISCT Status supported. Mar 20 02:06:35 media preclear_disk-diff[4291]: ^I^I^I^I^ISCT Feature Control supported. Mar 20 02:06:35 media preclear_disk-diff[4291]: ^I^I^I^I^ISCT Data Table supported. Mar 20 02:06:35 media preclear_disk-diff[4291]: Mar 20 02:06:35 media preclear_disk-diff[4291]: SMART Attributes Data Structure revision number: 16 Mar 20 02:06:35 media preclear_disk-diff[4291]: Vendor Specific SMART Attributes with Thresholds: Mar 20 02:06:35 media preclear_disk-diff[4291]: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE Mar 20 02:06:35 media preclear_disk-diff[4291]: 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 Mar 20 02:06:35 media preclear_disk-diff[4291]: 2 Throughput_Performance 0x0005 100 100 054 Pre-fail Offline - 0 Mar 20 02:06:35 media preclear_disk-diff[4291]: 3 Spin_Up_Time 0x0007 100 100 024 Pre-fail Always - 0 Mar 20 02:06:35 media preclear_disk-diff[4291]: 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 4 Mar 20 02:06:35 media preclear_disk-diff[4291]: 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 Mar 20 02:06:35 media preclear_disk-diff[4291]: 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 Mar 20 02:06:35 media preclear_disk-diff[4291]: 8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0 Mar 20 02:06:35 media preclear_disk-diff[4291]: 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 29 Mar 20 02:06:35 media preclear_disk-diff[4291]: 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 Mar 20 02:06:35 media preclear_disk-diff[4291]: 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 4 Mar 20 02:06:35 media preclear_disk-diff[4291]: 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 4 Mar 20 02:06:35 media preclear_disk-diff[4291]: 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 4 Mar 20 02:06:35 media preclear_disk-diff[4291]: 194 Temperature_Celsius 0x0002 206 206 000 Old_age Always - 29 (Lifetime Min/Max 24/30) Mar 20 02:06:35 media preclear_disk-diff[4291]: 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 Mar 20 02:06:35 media preclear_disk-diff[4291]: 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 Mar 20 02:06:35 media preclear_disk-diff[4291]: 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 Mar 20 02:06:35 media preclear_disk-diff[4291]: 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 Mar 20 02:06:35 media preclear_disk-diff[4291]: Mar 20 02:06:35 media preclear_disk-diff[4291]: SMART Error Log Version: 1 Mar 20 02:06:35 media preclear_disk-diff[4291]: No Errors Logged Mar 20 02:06:35 media preclear_disk-diff[4291]: Mar 20 02:06:35 media preclear_disk-diff[4291]: SMART Self-test log structure revision number 1 Mar 20 02:06:35 media preclear_disk-diff[4291]: No self-tests have been logged. [To run self-tests, use: smartctl -t] Mar 20 02:06:35 media preclear_disk-diff[4291]: Mar 20 02:06:35 media preclear_disk-diff[4291]: Mar 20 02:06:35 media preclear_disk-diff[4291]: SMART Selective self-test log data structure revision number 1 Mar 20 02:06:35 media preclear_disk-diff[4291]: SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS Mar 20 02:06:35 media preclear_disk-diff[4291]: 1 0 0 Not_testing Mar 20 02:06:35 media preclear_disk-diff[4291]: 2 0 0 Not_testing Mar 20 02:06:35 media preclear_disk-diff[4291]: 3 0 0 Not_testing Mar 20 02:06:35 media preclear_disk-diff[4291]: 4 0 0 Not_testing Mar 20 02:06:35 media preclear_disk-diff[4291]: 5 0 0 Not_testing Mar 20 02:06:35 media preclear_disk-diff[4291]: Selective self-test flags (0x0): Mar 20 02:06:35 media preclear_disk-diff[4291]: After scanning selected spans, do NOT read-scan remainder of disk. Mar 20 02:06:35 media preclear_disk-diff[4291]: If Selective self-test is pending on power-up, resume after 0 minute delay. Mar 20 02:06:35 media preclear_disk-diff[4291]: == Mar 20 02:06:35 media preclear_disk-diff[4291]: ============================================================================ Mar 20 02:06:35 media preclear_disk-diff[4291]: I also attached the full results because I wasn't sure if this was enough info. Thanks Results.txt

I used the preclear script right before your latest release. It was the one that supported advanced format drives. I looked in my flash directory but did not find a preclear_reports anywhere on it. When my preclear had finished, I typed: grep preclear /var/log/syslog | todos >> /boot/preclear_results.txt ...so I don't know if that affected the output of the results. What steps must I follow so that I can get the simple-to-read results for my next drive preclearing?

I used the new preclear script. Is this hard drive fine? ============================================================================ Feb 1 23:34:26 media preclear_disk-diff[6205]: == Feb 1 23:34:26 media preclear_disk-diff[6205]: == S.M.A.R.T Initial Report for /dev/sdd Feb 1 23:34:26 media preclear_disk-diff[6205]: == Feb 1 23:34:26 media preclear_disk-diff[6205]: Disk: /dev/sdd Feb 1 23:34:26 media preclear_disk-diff[6205]: smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build) Feb 1 23:34:26 media preclear_disk-diff[6205]: Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Feb 1 23:34:26 media preclear_disk-diff[6205]: Feb 1 23:34:26 media preclear_disk-diff[6205]: === START OF INFORMATION SECTION === Feb 1 23:34:26 media preclear_disk-diff[6205]: Device Model: WDC WD20EARS-00MVWB0 Feb 1 23:34:26 media preclear_disk-diff[6205]: Serial Number: WD-WMAZA2751951 Feb 1 23:34:26 media preclear_disk-diff[6205]: Firmware Version: 51.0AB51 Feb 1 23:34:26 media preclear_disk-diff[6205]: User Capacity: 2,000,398,934,016 bytes Feb 1 23:34:26 media preclear_disk-diff[6205]: Device is: Not in smartctl database [for details use: -P showall] Feb 1 23:34:26 media preclear_disk-diff[6205]: ATA Version is: 8 Feb 1 23:34:26 media preclear_disk-diff[6205]: ATA Standard is: Exact ATA specification draft version not indicated Feb 1 23:34:26 media preclear_disk-diff[6205]: Local Time is: Mon Jan 31 21:19:03 2011 PST Feb 1 23:34:26 media preclear_disk-diff[6205]: SMART support is: Available - device has SMART capability. Feb 1 23:34:26 media preclear_disk-diff[6205]: SMART support is: Enabled Feb 1 23:34:26 media preclear_disk-diff[6205]: Feb 1 23:34:26 media preclear_disk-diff[6205]: === START OF READ SMART DATA SECTION === Feb 1 23:34:26 media preclear_disk-diff[6205]: SMART overall-health self-assessment test result: PASSED Feb 1 23:34:26 media preclear_disk-diff[6205]: Feb 1 23:34:26 media preclear_disk-diff[6205]: General SMART Values: Feb 1 23:34:26 media preclear_disk-diff[6205]: Offline data collection status: (0x80)^IOffline data collection activity Feb 1 23:34:26 media preclear_disk-diff[6205]: ^I^I^I^I^Iwas never started. Feb 1 23:34:26 media preclear_disk-diff[6205]: ^I^I^I^I^IAuto Offline Data Collection: Enabled. Feb 1 23:34:26 media preclear_disk-diff[6205]: Self-test execution status: ( 0)^IThe previous self-test routine completed Feb 1 23:34:26 media preclear_disk-diff[6205]: ^I^I^I^I^Iwithout error or no self-test has ever Feb 1 23:34:26 media preclear_disk-diff[6205]: ^I^I^I^I^Ibeen run. Feb 1 23:34:26 media preclear_disk-diff[6205]: Total time to complete Offline Feb 1 23:34:26 media preclear_disk-diff[6205]: data collection: ^I^I (36480) seconds. Feb 1 23:34:26 media preclear_disk-diff[6205]: Offline data collection Feb 1 23:34:26 media preclear_disk-diff[6205]: capabilities: ^I^I^I (0x7b) SMART execute Offline immediate. Feb 1 23:34:26 media preclear_disk-diff[6205]: ^I^I^I^I^IAuto Offline data collection on/off support. Feb 1 23:34:26 media preclear_disk-diff[6205]: ^I^I^I^I^ISuspend Offline collection upon new Feb 1 23:34:26 media preclear_disk-diff[6205]: ^I^I^I^I^Icommand. Feb 1 23:34:26 media preclear_disk-diff[6205]: ^I^I^I^I^IOffline surface scan supported. Feb 1 23:34:26 media preclear_disk-diff[6205]: ^I^I^I^I^ISelf-test supported. Feb 1 23:34:26 media preclear_disk-diff[6205]: ^I^I^I^I^IConveyance Self-test supported. Feb 1 23:34:26 media preclear_disk-diff[6205]: ^I^I^I^I^ISelective Self-test supported. Feb 1 23:34:26 media preclear_disk-diff[6205]: SMART capabilities: (0x0003)^ISaves SMART data before entering Feb 1 23:34:26 media preclear_disk-diff[6205]: ^I^I^I^I^Ipower-saving mode. Feb 1 23:34:26 media preclear_disk-diff[6205]: ^I^I^I^I^ISupports SMART auto save timer. Feb 1 23:34:26 media preclear_disk-diff[6205]: Error logging capability: (0x01)^IError logging supported. Feb 1 23:34:26 media preclear_disk-diff[6205]: ^I^I^I^I^IGeneral Purpose Logging supported. Feb 1 23:34:26 media preclear_disk-diff[6205]: Short self-test routine Feb 1 23:34:26 media preclear_disk-diff[6205]: recommended polling time: ^I ( 2) minutes. Feb 1 23:34:26 media preclear_disk-diff[6205]: Extended self-test routine Feb 1 23:34:26 media preclear_disk-diff[6205]: recommended polling time: ^I ( 255) minutes. Feb 1 23:34:26 media preclear_disk-diff[6205]: Conveyance self-test routine Feb 1 23:34:26 media preclear_disk-diff[6205]: recommended polling time: ^I ( 5) minutes. Feb 1 23:34:26 media preclear_disk-diff[6205]: SCT capabilities: ^I (0x3035)^ISCT Status supported. Feb 1 23:34:26 media preclear_disk-diff[6205]: ^I^I^I^I^ISCT Feature Control supported. Feb 1 23:34:26 media preclear_disk-diff[6205]: ^I^I^I^I^ISCT Data Table supported. Feb 1 23:34:26 media preclear_disk-diff[6205]: Feb 1 23:34:26 media preclear_disk-diff[6205]: SMART Attributes Data Structure revision number: 16 Feb 1 23:34:26 media preclear_disk-diff[6205]: Vendor Specific SMART Attributes with Thresholds: Feb 1 23:34:26 media preclear_disk-diff[6205]: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE Feb 1 23:34:26 media preclear_disk-diff[6205]: 1 Raw_Read_Error_Rate 0x002f 100 253 051 Pre-fail Always - 0 Feb 1 23:34:26 media preclear_disk-diff[6205]: 3 Spin_Up_Time 0x0027 253 253 021 Pre-fail Always - 1083 Feb 1 23:34:26 media preclear_disk-diff[6205]: 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 15 Feb 1 23:34:26 media preclear_disk-diff[6205]: 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 Feb 1 23:34:26 media preclear_disk-diff[6205]: 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 Feb 1 23:34:26 media preclear_disk-diff[6205]: 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 0 Feb 1 23:34:26 media preclear_disk-diff[6205]: 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 Feb 1 23:34:26 media preclear_disk-diff[6205]: 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 Feb 1 23:34:26 media preclear_disk-diff[6205]: 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 13 Feb 1 23:34:26 media preclear_disk-diff[6205]: 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 11 Feb 1 23:34:26 media preclear_disk-diff[6205]: 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 16 Feb 1 23:34:26 media preclear_disk-diff[6205]: 194 Temperature_Celsius 0x0022 124 120 000 Old_age Always - 26 Feb 1 23:34:26 media preclear_disk-diff[6205]: 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 Feb 1 23:34:26 media preclear_disk-diff[6205]: 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 Feb 1 23:34:26 media preclear_disk-diff[6205]: 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 Feb 1 23:34:26 media preclear_disk-diff[6205]: 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0 Feb 1 23:34:26 media preclear_disk-diff[6205]: 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 Feb 1 23:34:26 media preclear_disk-diff[6205]: Feb 1 23:34:26 media preclear_disk-diff[6205]: SMART Error Log Version: 1 Feb 1 23:34:26 media preclear_disk-diff[6205]: No Errors Logged Feb 1 23:34:26 media preclear_disk-diff[6205]: Feb 1 23:34:26 media preclear_disk-diff[6205]: SMART Self-test log structure revision number 1 Feb 1 23:34:26 media preclear_disk-diff[6205]: No self-tests have been logged. [To run self-tests, use: smartctl -t] Feb 1 23:34:26 media preclear_disk-diff[6205]: Feb 1 23:34:26 media preclear_disk-diff[6205]: Feb 1 23:34:26 media preclear_disk-diff[6205]: SMART Selective self-test log data structure revision number 1 Feb 1 23:34:26 media preclear_disk-diff[6205]: SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS Feb 1 23:34:26 media preclear_disk-diff[6205]: 1 0 0 Not_testing Feb 1 23:34:26 media preclear_disk-diff[6205]: 2 0 0 Not_testing Feb 1 23:34:26 media preclear_disk-diff[6205]: 3 0 0 Not_testing Feb 1 23:34:26 media preclear_disk-diff[6205]: 4 0 0 Not_testing Feb 1 23:34:26 media preclear_disk-diff[6205]: 5 0 0 Not_testing Feb 1 23:34:26 media preclear_disk-diff[6205]: Selective self-test flags (0x0): Feb 1 23:34:26 media preclear_disk-diff[6205]: After scanning selected spans, do NOT read-scan remainder of disk. Feb 1 23:34:26 media preclear_disk-diff[6205]: If Selective self-test is pending on power-up, resume after 0 minute delay. Feb 1 23:34:26 media preclear_disk-diff[6205]: == Feb 1 23:34:26 media preclear_disk-diff[6205]: ============================================================================ Feb 1 23:34:26 media preclear_disk-diff[6205]: Feb 1 23:34:26 media preclear_disk-diff[6205]: ============================================================================ Feb 1 23:34:26 media preclear_disk-diff[6205]: == Feb 1 23:34:26 media preclear_disk-diff[6205]: == S.M.A.R.T Final Report for /dev/sdd Feb 1 23:34:26 media preclear_disk-diff[6205]: == Feb 1 23:34:26 media preclear_disk-diff[6205]: Disk: /dev/sdd Feb 1 23:34:26 media preclear_disk-diff[6205]: smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build) Feb 1 23:34:26 media preclear_disk-diff[6205]: Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Feb 1 23:34:26 media preclear_disk-diff[6205]: Feb 1 23:34:26 media preclear_disk-diff[6205]: === START OF INFORMATION SECTION === Feb 1 23:34:26 media preclear_disk-diff[6205]: Device Model: WDC WD20EARS-00MVWB0 Feb 1 23:34:26 media preclear_disk-diff[6205]: Serial Number: WD-WMAZA2751951 Feb 1 23:34:26 media preclear_disk-diff[6205]: Firmware Version: 51.0AB51 Feb 1 23:34:26 media preclear_disk-diff[6205]: User Capacity: 2,000,398,934,016 bytes Feb 1 23:34:26 media preclear_disk-diff[6205]: Device is: Not in smartctl database [for details use: -P showall] Feb 1 23:34:26 media preclear_disk-diff[6205]: ATA Version is: 8 Feb 1 23:34:26 media preclear_disk-diff[6205]: ATA Standard is: Exact ATA specification draft version not indicated Feb 1 23:34:26 media preclear_disk-diff[6205]: Local Time is: Tue Feb 1 23:34:25 2011 PST Feb 1 23:34:26 media preclear_disk-diff[6205]: SMART support is: Available - device has SMART capability. Feb 1 23:34:26 media preclear_disk-diff[6205]: SMART support is: Enabled Feb 1 23:34:26 media preclear_disk-diff[6205]: Feb 1 23:34:26 media preclear_disk-diff[6205]: === START OF READ SMART DATA SECTION === Feb 1 23:34:26 media preclear_disk-diff[6205]: SMART overall-health self-assessment test result: PASSED Feb 1 23:34:26 media preclear_disk-diff[6205]: Feb 1 23:34:26 media preclear_disk-diff[6205]: General SMART Values: Feb 1 23:34:26 media preclear_disk-diff[6205]: Offline data collection status: (0x84)^IOffline data collection activity Feb 1 23:34:26 media preclear_disk-diff[6205]: ^I^I^I^I^Iwas suspended by an interrupting command from host. Feb 1 23:34:26 media preclear_disk-diff[6205]: ^I^I^I^I^IAuto Offline Data Collection: Enabled. Feb 1 23:34:26 media preclear_disk-diff[6205]: Self-test execution status: ( 0)^IThe previous self-test routine completed Feb 1 23:34:26 media preclear_disk-diff[6205]: ^I^I^I^I^Iwithout error or no self-test has ever Feb 1 23:34:26 media preclear_disk-diff[6205]: ^I^I^I^I^Ibeen run. Feb 1 23:34:26 media preclear_disk-diff[6205]: Total time to complete Offline Feb 1 23:34:26 media preclear_disk-diff[6205]: data collection: ^I^I (36480) seconds. Feb 1 23:34:26 media preclear_disk-diff[6205]: Offline data collection Feb 1 23:34:26 media preclear_disk-diff[6205]: capabilities: ^I^I^I (0x7b) SMART execute Offline immediate. Feb 1 23:34:26 media preclear_disk-diff[6205]: ^I^I^I^I^IAuto Offline data collection on/off support. Feb 1 23:34:26 media preclear_disk-diff[6205]: ^I^I^I^I^ISuspend Offline collection upon new Feb 1 23:34:26 media preclear_disk-diff[6205]: ^I^I^I^I^Icommand. Feb 1 23:34:26 media preclear_disk-diff[6205]: ^I^I^I^I^IOffline surface scan supported. Feb 1 23:34:26 media preclear_disk-diff[6205]: ^I^I^I^I^ISelf-test supported. Feb 1 23:34:26 media preclear_disk-diff[6205]: ^I^I^I^I^IConveyance Self-test supported. Feb 1 23:34:26 media preclear_disk-diff[6205]: ^I^I^I^I^ISelective Self-test supported. Feb 1 23:34:26 media preclear_disk-diff[6205]: SMART capabilities: (0x0003)^ISaves SMART data before entering Feb 1 23:34:26 media preclear_disk-diff[6205]: ^I^I^I^I^Ipower-saving mode. Feb 1 23:34:26 media preclear_disk-diff[6205]: ^I^I^I^I^ISupports SMART auto save timer. Feb 1 23:34:26 media preclear_disk-diff[6205]: Error logging capability: (0x01)^IError logging supported. Feb 1 23:34:26 media preclear_disk-diff[6205]: ^I^I^I^I^IGeneral Purpose Logging supported. Feb 1 23:34:26 media preclear_disk-diff[6205]: Short self-test routine Feb 1 23:34:26 media preclear_disk-diff[6205]: recommended polling time: ^I ( 2) minutes. Feb 1 23:34:26 media preclear_disk-diff[6205]: Extended self-test routine Feb 1 23:34:26 media preclear_disk-diff[6205]: recommended polling time: ^I ( 255) minutes. Feb 1 23:34:26 media preclear_disk-diff[6205]: Conveyance self-test routine Feb 1 23:34:26 media preclear_disk-diff[6205]: recommended polling time: ^I ( 5) minutes. Feb 1 23:34:26 media preclear_disk-diff[6205]: SCT capabilities: ^I (0x3035)^ISCT Status supported. Feb 1 23:34:26 media preclear_disk-diff[6205]: ^I^I^I^I^ISCT Feature Control supported. Feb 1 23:34:26 media preclear_disk-diff[6205]: ^I^I^I^I^ISCT Data Table supported. Feb 1 23:34:26 media preclear_disk-diff[6205]: Feb 1 23:34:26 media preclear_disk-diff[6205]: SMART Attributes Data Structure revision number: 16 Feb 1 23:34:26 media preclear_disk-diff[6205]: Vendor Specific SMART Attributes with Thresholds: Feb 1 23:34:26 media preclear_disk-diff[6205]: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE Feb 1 23:34:26 media preclear_disk-diff[6205]: 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 Feb 1 23:34:26 media preclear_disk-diff[6205]: 3 Spin_Up_Time 0x0027 253 253 021 Pre-fail Always - 1083 Feb 1 23:34:26 media preclear_disk-diff[6205]: 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 15 Feb 1 23:34:26 media preclear_disk-diff[6205]: 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 Feb 1 23:34:26 media preclear_disk-diff[6205]: 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 Feb 1 23:34:26 media preclear_disk-diff[6205]: 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 26 Feb 1 23:34:26 media preclear_disk-diff[6205]: 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 Feb 1 23:34:26 media preclear_disk-diff[6205]: 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 Feb 1 23:34:26 media preclear_disk-diff[6205]: 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 13 Feb 1 23:34:26 media preclear_disk-diff[6205]: 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 11 Feb 1 23:34:26 media preclear_disk-diff[6205]: 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 17 Feb 1 23:34:26 media preclear_disk-diff[6205]: 194 Temperature_Celsius 0x0022 123 120 000 Old_age Always - 27 Feb 1 23:34:26 media preclear_disk-diff[6205]: 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 Feb 1 23:34:26 media preclear_disk-diff[6205]: 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 Feb 1 23:34:26 media preclear_disk-diff[6205]: 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 Feb 1 23:34:26 media preclear_disk-diff[6205]: 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 Feb 1 23:34:26 media preclear_disk-diff[6205]: 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 Feb 1 23:34:26 media preclear_disk-diff[6205]: Feb 1 23:34:26 media preclear_disk-diff[6205]: SMART Error Log Version: 1 Feb 1 23:34:26 media preclear_disk-diff[6205]: No Errors Logged Feb 1 23:34:26 media preclear_disk-diff[6205]: Feb 1 23:34:26 media preclear_disk-diff[6205]: SMART Self-test log structure revision number 1 Feb 1 23:34:26 media preclear_disk-diff[6205]: No self-tests have been logged. [To run self-tests, use: smartctl -t] Feb 1 23:34:26 media preclear_disk-diff[6205]: Feb 1 23:34:26 media preclear_disk-diff[6205]: Feb 1 23:34:26 media preclear_disk-diff[6205]: SMART Selective self-test log data structure revision number 1 Feb 1 23:34:26 media preclear_disk-diff[6205]: SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS Feb 1 23:34:26 media preclear_disk-diff[6205]: 1 0 0 Not_testing Feb 1 23:34:26 media preclear_disk-diff[6205]: 2 0 0 Not_testing Feb 1 23:34:26 media preclear_disk-diff[6205]: 3 0 0 Not_testing Feb 1 23:34:26 media preclear_disk-diff[6205]: 4 0 0 Not_testing Feb 1 23:34:26 media preclear_disk-diff[6205]: 5 0 0 Not_testing Feb 1 23:34:26 media preclear_disk-diff[6205]: Selective self-test flags (0x0): Feb 1 23:34:26 media preclear_disk-diff[6205]: After scanning selected spans, do NOT read-scan remainder of disk. Feb 1 23:34:26 media preclear_disk-diff[6205]: If Selective self-test is pending on power-up, resume after 0 minute delay. Feb 1 23:34:26 media preclear_disk-diff[6205]: == Feb 1 23:34:26 media preclear_disk-diff[6205]: ============================================================================ Feb 1 23:34:26 media preclear_disk-diff[6205]:

My friend asked me to post his pre-clear results here to see if everything came out fine. Let me know if all is well ============================================================================ == == Disk /dev/sdb has been successfully precleared == == Ran 1 preclear-disk cycle == == Using :Read block size = 8225280 Bytes == Last Cycle's Pre Read Time á: 7:29:24 (74 MB/s) == Last Cycle's Zeroing time á : 6:57:27 (79 MB/s) == Last Cycle's Post Read Time : 13:06:15 (42 MB/s) == Last Cycle's Total Time á á : 27:34:13 == == Total Elapsed Time 27:34:13 == == Disk Start Temperature: 22C == == Current Disk Temperature: 24C, == ============================================================================ S.M.A.R.T. error count differences detected after pre-clear note, some 'raw' values may change, but not be an indication of a problem 54c54 < á 1 Raw_Read_Error_Rate á á 0x002f á 100 á 253 á 051 á áPre-fail áAlways á á á - á á á 0 --- > á 1 Raw_Read_Error_Rate á á 0x002f á 200 á 200 á 051 á áPre-fail áAlways á á á - á á á 0 63c63 < 193 Load_Cycle_Count á á á á0x0032 á 200 á 200 á 000 á áOld_age á Always á á á - á á á 24 --- > 193 Load_Cycle_Count á á á á0x0032 á 200 á 200 á 000 á áOld_age á Always á á á - á á á 25 ============================================================================ ============================================================================ == == S.M.A.R.T Initial Report == smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: á á WDC WD20EARS-00MVWB0 Serial Number: á áWD-WMAZA0613742 Firmware Version: 51.0AB51 User Capacity: á á2,000,398,934,016 bytes Device is: á á á áNot in smartctl database [for details use: -P showall] ATA Version is: á 8 ATA Standard is: áExact ATA specification draft version not indicated SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: á(0x80) Offline data collection activity á á á á á á á á á á á á á á á á á á á áwas never started. á á á á á á á á á á á á á á á á á á á áAuto Offline Data Collection: Enabled. Self-test execution status: á á á( á 0) The previous self-test routine completed á á á á á á á á á á á á á á á á á á á áwithout error or no self-test has ever á á á á á á á á á á á á á á á á á á á ábeen run. Total time to complete Offline data collection: á á á á á á á á (37800) seconds. Offline data collection capabilities: á á á á á á á á á á(0x7b) SMART execute Offline immediate. á á á á á á á á á á á á á á á á á á á áAuto Offline data collection on/off support. á á á á á á á á á á á á á á á á á á á áSuspend Offline collection upon new á á á á á á á á á á á á á á á á á á á ácommand. á á á á á á á á á á á á á á á á á á á áOffline surface scan supported. á á á á á á á á á á á á á á á á á á á áSelf-test supported. á á á á á á á á á á á á á á á á á á á áConveyance Self-test supported. á á á á á á á á á á á á á á á á á á á áSelective Self-test supported. SMART capabilities: á á á á á á(0x0003) Saves SMART data before entering á á á á á á á á á á á á á á á á á á á ápower-saving mode. á á á á á á á á á á á á á á á á á á á áSupports SMART auto save timer. Error logging capability: á á á á(0x01) Error logging supported. á á á á á á á á á á á á á á á á á á á áGeneral Purpose Logging supported. Short self-test routine recommended polling time: á á á á( á 2) minutes. Extended self-test routine recommended polling time: á á á á( 255) minutes. Conveyance self-test routine recommended polling time: á á á á( á 5) minutes. SCT capabilities: á á á á á á á(0x3035) SCT Status supported. á á á á á á á á á á á á á á á á á á á áSCT Feature Control supported. á á á á á á á á á á á á á á á á á á á áSCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME á á á á áFLAG á á VALUE WORST THRESH TYPE á á áUPDATED áWHEN_FAILED RAW_VALUE á1 Raw_Read_Error_Rate á á 0x002f á 100 á 253 á 051 á áPre-fail áAlways á á á - á á á 0 á3 Spin_Up_Time á á á á á á0x0027 á 173 á 169 á 021 á áPre-fail áAlways á á á - á á á 6333 á4 Start_Stop_Count á á á á0x0032 á 100 á 100 á 000 á áOld_age á Always á á á - á á á 12 á5 Reallocated_Sector_Ct á 0x0033 á 200 á 200 á 140 á áPre-fail áAlways á á á - á á á 0 á7 Seek_Error_Rate á á á á 0x002e á 100 á 253 á 000 á áOld_age á Always á á á - á á á 0 á10 Spin_Retry_Count á á á á0x0032 á 100 á 253 á 000 á áOld_age á Always á á á - á á á 0 á11 Calibration_Retry_Count 0x0032 á 100 á 253 á 000 á áOld_age á Always á á á - á á á 0 á12 Power_Cycle_Count á á á 0x0032 á 100 á 100 á 000 á áOld_age á Always á á á - á á á 10 192 Power-Off_Retract_Count 0x0032 á 200 á 200 á 000 á áOld_age á Always á á á - á á á 9 193 Load_Cycle_Count á á á á0x0032 á 200 á 200 á 000 á áOld_age á Always á á á - á á á 24 196 Reallocated_Event_Count 0x0032 á 200 á 200 á 000 á áOld_age á Always á á á - á á á 0 197 Current_Pending_Sector á0x0032 á 200 á 200 á 000 á áOld_age á Always á á á - á á á 0 198 Offline_Uncorrectable á 0x0030 á 100 á 253 á 000 á áOld_age á Offline á á á- á á á 0 199 UDMA_CRC_Error_Count á á0x0032 á 200 á 200 á 000 á áOld_age á Always á á á - á á á 0 200 Multi_Zone_Error_Rate á 0x0008 á 100 á 253 á 000 á áOld_age á Offline á á á- á á á 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. á[To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 áSPAN áMIN_LBA áMAX_LBA áCURRENT_TEST_STATUS á á1 á á á á0 á á á á0 áNot_testing á á2 á á á á0 á á á á0 áNot_testing á á3 á á á á0 á á á á0 áNot_testing á á4 á á á á0 á á á á0 áNot_testing á á5 á á á á0 á á á á0 áNot_testing Selective self-test flags (0x0): áAfter scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. == ============================================================================ ============================================================================ == == S.M.A.R.T Final Report == smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: á á WDC WD20EARS-00MVWB0 Serial Number: á áWD-WMAZA0613742 Firmware Version: 51.0AB51 User Capacity: á á2,000,398,934,016 bytes Device is: á á á áNot in smartctl database [for details use: -P showall] ATA Version is: á 8 ATA Standard is: áExact ATA specification draft version not indicated SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: á(0x80) Offline data collection activity á á á á á á á á á á á á á á á á á á á áwas never started. á á á á á á á á á á á á á á á á á á á áAuto Offline Data Collection: Enabled. Self-test execution status: á á á( á 0) The previous self-test routine completed á á á á á á á á á á á á á á á á á á á áwithout error or no self-test has ever á á á á á á á á á á á á á á á á á á á ábeen run. Total time to complete Offline data collection: á á á á á á á á (37800) seconds. Offline data collection capabilities: á á á á á á á á á á(0x7b) SMART execute Offline immediate. á á á á á á á á á á á á á á á á á á á áAuto Offline data collection on/off support. á á á á á á á á á á á á á á á á á á á áSuspend Offline collection upon new á á á á á á á á á á á á á á á á á á á ácommand. á á á á á á á á á á á á á á á á á á á áOffline surface scan supported. á á á á á á á á á á á á á á á á á á á áSelf-test supported. á á á á á á á á á á á á á á á á á á á áConveyance Self-test supported. á á á á á á á á á á á á á á á á á á á áSelective Self-test supported. SMART capabilities: á á á á á á(0x0003) Saves SMART data before entering á á á á á á á á á á á á á á á á á á á ápower-saving mode. á á á á á á á á á á á á á á á á á á á áSupports SMART auto save timer. Error logging capability: á á á á(0x01) Error logging supported. á á á á á á á á á á á á á á á á á á á áGeneral Purpose Logging supported. Short self-test routine recommended polling time: á á á á( á 2) minutes. Extended self-test routine recommended polling time: á á á á( 255) minutes. Conveyance self-test routine recommended polling time: á á á á( á 5) minutes. SCT capabilities: á á á á á á á(0x3035) SCT Status supported. á á á á á á á á á á á á á á á á á á á áSCT Feature Control supported. á á á á á á á á á á á á á á á á á á á áSCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME á á á á áFLAG á á VALUE WORST THRESH TYPE á á áUPDATED áWHEN_FAILED RAW_VALUE á1 Raw_Read_Error_Rate á á 0x002f á 200 á 200 á 051 á áPre-fail áAlways á á á - á á á 0 á3 Spin_Up_Time á á á á á á0x0027 á 173 á 169 á 021 á áPre-fail áAlways á á á - á á á 6333 á4 Start_Stop_Count á á á á0x0032 á 100 á 100 á 000 á áOld_age á Always á á á - á á á 12 á5 Reallocated_Sector_Ct á 0x0033 á 200 á 200 á 140 á áPre-fail áAlways á á á - á á á 0 á7 Seek_Error_Rate á á á á 0x002e á 100 á 253 á 000 á áOld_age á Always á á á - á á á 0 á10 Spin_Retry_Count á á á á0x0032 á 100 á 253 á 000 á áOld_age á Always á á á - á á á 0 á11 Calibration_Retry_Count 0x0032 á 100 á 253 á 000 á áOld_age á Always á á á - á á á 0 á12 Power_Cycle_Count á á á 0x0032 á 100 á 100 á 000 á áOld_age á Always á á á - á á á 10 192 Power-Off_Retract_Count 0x0032 á 200 á 200 á 000 á áOld_age á Always á á á - á á á 9 193 Load_Cycle_Count á á á á0x0032 á 200 á 200 á 000 á áOld_age á Always á á á - á á á 25 196 Reallocated_Event_Count 0x0032 á 200 á 200 á 000 á áOld_age á Always á á á - á á á 0 197 Current_Pending_Sector á0x0032 á 200 á 200 á 000 á áOld_age á Always á á á - á á á 0 198 Offline_Uncorrectable á 0x0030 á 100 á 253 á 000 á áOld_age á Offline á á á- á á á 0 199 UDMA_CRC_Error_Count á á0x0032 á 200 á 200 á 000 á áOld_age á Always á á á - á á á 0 200 Multi_Zone_Error_Rate á 0x0008 á 100 á 253 á 000 á áOld_age á Offline á á á- á á á 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. á[To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 áSPAN áMIN_LBA áMAX_LBA áCURRENT_TEST_STATUS á á1 á á á á0 á á á á0 áNot_testing á á2 á á á á0 á á á á0 áNot_testing á á3 á á á á0 á á á á0 áNot_testing á á4 á á á á0 á á á á0 áNot_testing á á5 á á á á0 á á á á0 áNot_testing Selective self-test flags (0x0): áAfter scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

I just finished preclearing my Black Friday drive Seagate 2TB model: ST32000542AS updated to CC35 firmware I'm still not certain which part of the results should be looked at so I posted an excerpt of what looked to be important. I also am attaching the full results in case I left something out. Please let me know if all is well. Dec 2 23:15:40 media preclear_disk-diff[10348]: == Disk /dev/sdb has been successfully precleared Dec 2 23:15:40 media preclear_disk-diff[10348]: == Dec 2 23:15:40 media preclear_disk-diff[10348]: == Ran 1 preclear-disk cycle Dec 2 23:15:40 media preclear_disk-diff[10348]: == Dec 2 23:15:40 media preclear_disk-diff[10348]: == Using :Read block size = 8225280 Bytes Dec 2 23:15:40 media preclear_disk-diff[10348]: == Last Cycle's Pre Read Time : 6:54:17 (80 MB/s) Dec 2 23:15:40 media preclear_disk-diff[10348]: == Last Cycle's Zeroing time : 6:58:08 (79 MB/s) Dec 2 23:15:40 media preclear_disk-diff[10348]: == Last Cycle's Post Read Time : 14:31:47 (38 MB/s) Dec 2 23:15:40 media preclear_disk-diff[10348]: == Last Cycle's Total Time : 28:25:16 Dec 2 23:15:40 media preclear_disk-diff[10348]: == Dec 2 23:15:40 media preclear_disk-diff[10348]: == Total Elapsed Time 28:25:16 Dec 2 23:15:40 media preclear_disk-diff[10348]: == Dec 2 23:15:40 media preclear_disk-diff[10348]: == Disk Start Temperature: 27C Dec 2 23:15:40 media preclear_disk-diff[10348]: == Dec 2 23:15:40 media preclear_disk-diff[10348]: == Current Disk Temperature: 29C, Dec 2 23:15:40 media preclear_disk-diff[10348]: == Dec 2 23:15:40 media preclear_disk-diff[10348]: ============================================================================ Dec 2 23:15:40 media preclear_disk-diff[10348]: S.M.A.R.T. error count differences detected after pre-clear Dec 2 23:15:40 media preclear_disk-diff[10348]: note, some 'raw' values may change, but not be an indication of a problem Dec 2 23:15:40 media preclear_disk-diff[10348]: 54c54 Dec 2 23:15:40 media preclear_disk-diff[10348]: < 1 Raw_Read_Error_Rate 0x000f 100 100 006 Pre-fail Always - 9935 Dec 2 23:15:40 media preclear_disk-diff[10348]: --- Dec 2 23:15:40 media preclear_disk-diff[10348]: > 1 Raw_Read_Error_Rate 0x000f 119 100 006 Pre-fail Always - 211695025 Dec 2 23:15:40 media preclear_disk-diff[10348]: 58c58 Dec 2 23:15:40 media preclear_disk-diff[10348]: < 7 Seek_Error_Rate 0x000f 100 253 030 Pre-fail Always - 21 Dec 2 23:15:40 media preclear_disk-diff[10348]: --- Dec 2 23:15:40 media preclear_disk-diff[10348]: > 7 Seek_Error_Rate 0x000f 100 253 030 Pre-fail Always - 457994 Dec 2 23:15:40 media preclear_disk-diff[10348]: 64c64 Dec 2 23:15:40 media preclear_disk-diff[10348]: < 188 Unknown_Attribute 0x0032 100 253 000 Old_age Always - 0 Dec 2 23:15:40 media preclear_disk-diff[10348]: --- Dec 2 23:15:40 media preclear_disk-diff[10348]: > 188 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 Dec 2 23:15:40 media preclear_disk-diff[10348]: 66,67c66,67 Dec 2 23:15:40 media preclear_disk-diff[10348]: < 190 Airflow_Temperature_Cel 0x0022 073 071 045 Old_age Always - 27 (Lifetime Min/Max 26/27) Dec 2 23:15:40 media preclear_disk-diff[10348]: < 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always Dec 2 23:15:40 media preclear_disk-diff[10348]: --- Dec 2 23:15:40 media preclear_disk-diff[10348]: > 190 Airflow_Temperature_Cel 0x0022 071 069 045 Old_age Always - 29 (Lifetime Min/Max 26/31) Dec 2 23:15:40 media preclear_disk-diff[10348]: > 195 Hardware_ECC_Recovered 0x001a 051 047 000 Old_age Always Dec 2 23:15:40 media preclear_disk-diff[10348]: 70,73c70,73 Dec 2 23:15:40 media preclear_disk-diff[10348]: < 199 UDMA_CRC_Error_Count 0x003e 200 253 000 Old_age Always - 0 Dec 2 23:15:40 media preclear_disk-diff[10348]: < 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 89073326751757 Dec 2 23:15:40 media preclear_disk-diff[10348]: < 241 Unknown_Attribute 0x0000 100 253 000 Old_age Offline - 0 Dec 2 23:15:40 media preclear_disk-diff[10348]: < 242 Unknown_Attribute 0x0000 100 253 000 Old_age Offline - 923 Dec 2 23:15:40 media preclear_disk-diff[10348]: --- Dec 2 23:15:40 media preclear_disk-diff[10348]: > 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 Dec 2 23:15:40 media preclear_disk-diff[10348]: > 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 169973330739242 Dec 2 23:15:40 media preclear_disk-diff[10348]: > 241 Unknown_Attribute 0x0000 100 253 000 Old_age Offline - 878605953 Dec 2 23:15:40 media preclear_disk-diff[10348]: > 242 Unknown_Attribute 0x0000 100 253 000 Old_age Offline - 3328787425 Dec 2 23:15:40 media preclear_disk-diff[10348]: ============================================================================ Dec 2 23:15:40 media preclear_disk-diff[10348]: Seagate_Results.txt

final part Nov 22 04:20:46 media preclear_disk-diff[14168]: ============================================================================ Nov 22 04:20:46 media preclear_disk-diff[14168]: == Nov 22 04:20:46 media preclear_disk-diff[14168]: == Disk /dev/sdb has been successfully precleared Nov 22 04:20:46 media preclear_disk-diff[14168]: == Nov 22 04:20:46 media preclear_disk-diff[14168]: == Ran 1 preclear-disk cycle Nov 22 04:20:46 media preclear_disk-diff[14168]: == Nov 22 04:20:46 media preclear_disk-diff[14168]: == Using :Read block size = 8225280 Bytes Nov 22 04:20:46 media preclear_disk-diff[14168]: == Last Cycle's Pre Read Time : 7:43:57 (71 MB/s) Nov 22 04:20:46 media preclear_disk-diff[14168]: == Last Cycle's Zeroing time : 7:24:16 (75 MB/s) Nov 22 04:20:46 media preclear_disk-diff[14168]: == Last Cycle's Post Read Time : 14:01:46 (39 MB/s) Nov 22 04:20:46 media preclear_disk-diff[14168]: == Last Cycle's Total Time : 29:11:07 Nov 22 04:20:46 media preclear_disk-diff[14168]: == Nov 22 04:20:46 media preclear_disk-diff[14168]: == Total Elapsed Time 29:11:07 Nov 22 04:20:46 media preclear_disk-diff[14168]: == Nov 22 04:20:46 media preclear_disk-diff[14168]: == Disk Start Temperature: 26C Nov 22 04:20:46 media preclear_disk-diff[14168]: == Nov 22 04:20:46 media preclear_disk-diff[14168]: == Current Disk Temperature: 27C, Nov 22 04:20:46 media preclear_disk-diff[14168]: == Nov 22 04:20:46 media preclear_disk-diff[14168]: ============================================================================ Nov 22 04:20:46 media preclear_disk-diff[14168]: S.M.A.R.T. error count differences detected after pre-clear Nov 22 04:20:46 media preclear_disk-diff[14168]: note, some 'raw' values may change, but not be an indication of a problem Nov 22 04:20:46 media preclear_disk-diff[14168]: 19,20c19,20 Nov 22 04:20:46 media preclear_disk-diff[14168]: < Offline data collection status: (0x82)^IOffline data collection activity Nov 22 04:20:46 media preclear_disk-diff[14168]: < ^I^I^I^I^Iwas completed without error. Nov 22 04:20:46 media preclear_disk-diff[14168]: --- Nov 22 04:20:46 media preclear_disk-diff[14168]: > Offline data collection status: (0x84)^IOffline data collection activity Nov 22 04:20:46 media preclear_disk-diff[14168]: > ^I^I^I^I^Iwas suspended by an interrupting command from host. Nov 22 04:20:46 media preclear_disk-diff[14168]: 54c54 Nov 22 04:20:46 media preclear_disk-diff[14168]: < 1 Raw_Read_Error_Rate 0x002f 100 253 051 Pre-fail Always - 0 Nov 22 04:20:46 media preclear_disk-diff[14168]: --- Nov 22 04:20:46 media preclear_disk-diff[14168]: > 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 Nov 22 04:20:46 media preclear_disk-diff[14168]: 63c63 Nov 22 04:20:46 media preclear_disk-diff[14168]: < 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 59 Nov 22 04:20:46 media preclear_disk-diff[14168]: --- Nov 22 04:20:46 media preclear_disk-diff[14168]: > 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 60 Nov 22 04:20:46 media preclear_disk-diff[14168]: ============================================================================ Nov 22 04:20:46 media preclear_disk-diff[14168]: