WingmanNZ

Members
 View Profile  See their activity

  • Posts

    100

  • Joined

  • Last visited

 Content Type 

Posts posted by WingmanNZ

    [PLUGIN] GPU Statistics

    in Plugin Support

    Posted

    33 minutes ago, SimonF said:

    do you have the gvt-g plugin installed?

     

    can you provide lspci -nnmm

     

    No I don't have the plug-in installed.

     

     

    here is the output you requested;

     

    note: I have the ASPEED VGA adaptor as my primary to allow HTML5 KVM access to the machine, and the Intel UHD GPU is enabled in the bios so that I can use it in docker for HW transcoding.

      

    root@NAS:~# lspci -nnmm
00:00.0 "Host bridge [0600]" "Intel Corporation [8086]" "Device [a703]" -r01 -p00 "Super Micro Computer Inc [15d9]" "Device [1c48]"
00:01.0 "PCI bridge [0604]" "Intel Corporation [8086]" "Device [a70d]" -r01 -p00 "Super Micro Computer Inc [15d9]" "Device [1c48]"
00:02.0 "Display controller [0380]" "Intel Corporation [8086]" "Raptor Lake-S GT1 [UHD Graphics 770] [a780]" -r04 -p00 "Super Micro Computer Inc [15d9]" "Device [1c48]"
00:06.0 "PCI bridge [0604]" "Intel Corporation [8086]" "Device [a74d]" -r01 -p00 "" ""
00:0a.0 "Signal processing controller [1180]" "Intel Corporation [8086]" "Device [a77d]" -r01 -p00 "" ""
00:14.0 "USB controller [0c03]" "Intel Corporation [8086]" "Alder Lake-S PCH USB 3.2 Gen 2x2 XHCI Controller [7ae0]" -r11 -p30 "Super Micro Computer Inc [15d9]" "Device [1c48]"
00:14.2 "RAM memory [0500]" "Intel Corporation [8086]" "Alder Lake-S PCH Shared SRAM [7aa7]" -r11 -p00 "" ""
00:15.0 "Serial bus controller [0c80]" "Intel Corporation [8086]" "Alder Lake-S PCH Serial IO I2C Controller #0 [7acc]" -r11 -p00 "Super Micro Computer Inc [15d9]" "Device [1c48]"
00:15.1 "Serial bus controller [0c80]" "Intel Corporation [8086]" "Alder Lake-S PCH Serial IO I2C Controller #1 [7acd]" -r11 -p00 "Super Micro Computer Inc [15d9]" "Device [1c48]"
00:16.0 "Communication controller [0780]" "Intel Corporation [8086]" "Alder Lake-S PCH HECI Controller #1 [7ae8]" -r11 -p00 "Super Micro Computer Inc [15d9]" "Device [1c48]"
00:16.3 "Serial controller [0700]" "Intel Corporation [8086]" "Device [7aeb]" -r11 -p02 "Super Micro Computer Inc [15d9]" "Device [1c48]"
00:17.0 "SATA controller [0106]" "Intel Corporation [8086]" "Alder Lake-S PCH SATA Controller [AHCI Mode] [7ae2]" -r11 -p01 "Super Micro Computer Inc [15d9]" "Device [1c48]"
00:1c.0 "PCI bridge [0604]" "Intel Corporation [8086]" "Alder Lake-S PCH PCI Express Root Port #1 [7ab8]" -r11 -p00 "Super Micro Computer Inc [15d9]" "Device [1c48]"
00:1c.1 "PCI bridge [0604]" "Intel Corporation [8086]" "Alder Lake-S PCH PCI Express Root Port #2 [7ab9]" -r11 -p00 "Super Micro Computer Inc [15d9]" "Device [1c48]"
00:1c.3 "PCI bridge [0604]" "Intel Corporation [8086]" "Device [7abb]" -r11 -p00 "Super Micro Computer Inc [15d9]" "Device [1c48]"
00:1f.0 "ISA bridge [0601]" "Intel Corporation [8086]" "Device [7a88]" -r11 -p00 "Super Micro Computer Inc [15d9]" "Device [1c48]"
00:1f.3 "Audio device [0403]" "Intel Corporation [8086]" "Alder Lake-S HD Audio Controller [7ad0]" -r11 -p00 "Super Micro Computer Inc [15d9]" "Device [1c48]"
00:1f.4 "SMBus [0c05]" "Intel Corporation [8086]" "Alder Lake-S PCH SMBus Controller [7aa3]" -r11 -p00 "Super Micro Computer Inc [15d9]" "Device [1c48]"
00:1f.5 "Serial bus controller [0c80]" "Intel Corporation [8086]" "Alder Lake-S PCH SPI Controller [7aa4]" -r11 -p00 "Super Micro Computer Inc [15d9]" "Device [1c48]"
00:1f.6 "Ethernet controller [0200]" "Intel Corporation [8086]" "Ethernet Connection (17) I219-LM [1a1c]" -r11 -p00 "Super Micro Computer Inc [15d9]" "Ethernet Connection (17) I219-LM [1a1c]"
01:00.0 "Serial Attached SCSI controller [0107]" "Broadcom / LSI [1000]" "SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] [0072]" -r03 -p00 "Broadcom / LSI [1000]" "9211-8i [3020]"
02:00.0 "Non-Volatile memory controller [0108]" "ADATA Technology Co., Ltd. [1cc1]" "XPG SX8200 Pro PCIe Gen3x4 M.2 2280 Solid State Drive [8201]" -r03 -p02 "ADATA Technology Co., Ltd. [1cc1]" "XPG SX8200 Pro PCIe Gen3x4 M.2 2280 Solid State Drive [8201]"
03:00.0 "PCI bridge [0604]" "Integrated Technology Express, Inc. [1283]" "IT8893E PCIe to PCI Bridge [8893]" -r41 -p01 "" ""
05:00.0 "Ethernet controller [0200]" "Intel Corporation [8086]" "Ethernet Controller I225-LM [15f2]" -r03 -p00 "Super Micro Computer Inc [15d9]" "Ethernet Controller I225-LM [15f2]"
06:00.0 "PCI bridge [0604]" "ASPEED Technology, Inc. [1a03]" "AST1150 PCI-to-PCI Bridge [1150]" -r06 -p00 "Super Micro Computer Inc [15d9]" "AST1150 PCI-to-PCI Bridge [1c48]"
07:00.0 "VGA compatible controller [0300]" "ASPEED Technology, Inc. [1a03]" "ASPEED Graphics Family [2000]" -r52 -p00 "Super Micro Computer Inc [15d9]" "ASPEED Graphics Family [1c48]"
root@NAS:~#

     

     

    I ended up changing `VGA` in the grep search to `lspci -Dmm | grep -E 'Display|VGA'` in /usr/local/emhttp/plugins/gpustat/lib/Intel.php and the plug-in now works for me. 

    [PLUGIN] GPU Statistics

    in Plugin Support

    Posted

    On 3/29/2023 at 5:42 AM, SimonF said:

    But do both gpus have vga in text was not there on screen print for igpu

    My UHD 770 does not have VGA in the name... It has Display controller
      

    00:02.0 Display controller: Intel Corporation Raptor Lake-S GT1 [UHD Graphics 770] (rev 04)


     

     

     

     

    Intel Core i9-13900K with SuperMicro X13SAE-F or Gigabyte MW34-SP0?

    in Motherboards and CPUs

    Posted

    9 hours ago, brainreplaced said:

    @WingmanNZ, hello!

    I have a same build with x13sae-f + intel 12700. Did you try to start in legacy mode? I want to passthrough my gtx 1660 to vm but it is unsuccessful and I dont see any option in bios.

    I'm using UEFI only. I don't have a GPU installed yet for VM pass through. I can try this week with a Quadro P2000. Do you mind checking your idle power drawer with just your cpu/ram/motherboard connected to the power supply?

    Intel Core i9-13900K with SuperMicro X13SAE-F or Gigabyte MW34-SP0?

    in Motherboards and CPUs

    Posted

    On 1/4/2023 at 1:24 PM, saf said:

    Couple quick comments based on my current use of the Supermicro X13sae-f.

     

    • I purchased on the last week of December and it shipped with the 2.0 bios.
    • I am able to use the Intel i9 13900K without issues.  This was a nice surprise to include the 2.0 BIOS I noted above
    • First issue I ran into is that it cannot see my LSI 9300-8i adapter.  It sees it but no drives.  It is flashed into IT mode (shipped) but I also updated it.  I can see it on my Windows 10 desktop and can also boot into the controller after boot using ctrl-c.
    • According to Supermicro response to my ticket (their support is nice, quick, and so far pretty spot on for me) they said the PCIe x16 slot on this platform doesn't support any storage controlled card according to Intel.  So, our LAB didn't test any storage controller card on this platform.  I'm trying to upgrade from an older X11SSH-CTF that is rock solid outside of lack of compute by current CPU standards (home use)
    • Also of note that I am not able to see any drives even using the SATA ports.  I installed 6 WD 16 TB drives but only see one.  I've removed them all but again only see 1.  Support is still trying to see what could be the issue although they said the HD I am using is not on their supported list.

    So on one had it shipped with the required BIOS to support the 13900k CPU.  What little I have used of it - it is stupid fast.  Downside for me is the possibility of unsupported drives, no storage control, so not much use for a ZFS pool (I run 2 pools each of 6 disks).  It could be I didn't set something up correctly but so far everything support is saying it isn't supported be it drive or storage card.  Not sure what the board is for then outside maybe desktop workstation compute/cad that doesn't require lots of disks.

     

    I had an issue with my LSI 9200-8i adaptor not working in the second slot, it only works in the first 16x slot (closest) to the CPU. I have 24 drives connected to it via a SAS expander and it works great. I also have 4 SATA SSD's connected to 4 of the onboard SATA ports which are all working correctly.

     

    So far my only issue has been trying to get the CPU to drop down to C-States/P-States lower than C1/C2....

    What's your idle power consumption?

    in Motherboards and CPUs

    Posted

    On 11/23/2022 at 9:33 PM, fiR3W4LL said:

    Hi Guys
    Switched recently my build from Ryzen 7 3700x hoping to get less power consumption was pretty happy with the result.

    I have two servers, i changed only the Backupserver for now. 

     

    MB Supermicro X13SAE-F

    CPU: Intel 12700

    RAM: 64GB ECC DDR5 Kingston

    BeQuiet! Dark Rock TF2

    2x 1TB Cache NVME

    1x 500GB  VM NVME

    5x 16TB Toshiba MG08

    1x Ironwolf 8TB

     

    With the old Build i had a Powerconsumption of 110W with my Switch connected to it. Now i have a power consumption of about 55w. Will post more infos after i done with the Mainserver where is the only thing connected to the other USV.

     

    I would love to know what the output of running `powertop` on your system is. Also, what BIOS settings do you have configured. I have a similar CPU/RAM/Motherboard combo, but cannot get the CPU (Intel 13700) to move any lower than C2 power states :(

     

     

    XFS (MD5): EXPERIMENTAL ONLINE SHRINK FEATURE IN USE. USE AT YOUR OWN RISK!

    in General Support

    Posted

    8 hours ago, dalben said:

     

    Who would know then?  And would that person know if all large drives formatted with 6.10 need to be reformatted or just the one throwing the error?

    I would like to know this as well. I have one 10TB drive that shows this error upon every boot.

    I have been following this thread closely and look forward to RC4. Thank you @JorgeB for your investigations!

    Unraid OS version 6.7.2 available

    in Announcements

    Posted · Edited by WingmanNZ

    Looks like 6.8.0 RC's are not far away :D:D

     

    The new remote access management plugin appears to be live and testing internally as it requires `6.8.0-rc0p`

     

    https://raw.githubusercontent.com/limetech/Unraid.net/master/Unraid.net.plg

      

    <?xml version='1.0' standalone='yes'?>
<!DOCTYPE PLUGIN [
	<!ENTITY name "Unraid.net">
	<!ENTITY launch "Settings/ManagementAccess">
	<!ENTITY author "limetech">
	<!ENTITY version "2019.03.07a">
	<!ENTITY pluginURL "https://raw.githubusercontent.com/limetech/&name;/master/&name;.plg">
]>
<PLUGIN name="&name;" author="&author;" version="&version;" launch="&launch;" min="6.8.0-rc0p">

     

    • Like 1

    Double or Triple "Cache" pools

    in Feature Requests

    Posted

    @limetech or @jonp Would we be able to get some confirmation that this feature is in the works?

     

    I would love to have a setup with

     

    4x 4TB HDD in a cache pool for shares, and some cache only shares like backups/photos etc (stuff that having BTRS bitrot protection is good for)

    4x 1TB SSD's in another cache pool for VM's, Docker, appdata.

    20x 4TB disks in an array for bulk media storage. (single parity)

     

     

    VM Template UI: Keep custom XML edits when saving in template view.

    in Feature Requests

    Posted · Edited by WingmanNZ

    Currently I have hand edited options at the end of my VM XML config, as well as a manually selected network model `<model type='vmxnet3'/>`


    Example:
      

      </devices>
  <qemu:commandline>
    <qemu:arg value='one'/>
    <qemu:arg value='two'/>
    <qemu:arg value='three'/>
    <qemu:arg value='four'/>
  </qemu:commandline>
</domain>

     

    Could the Template editor keep these custom edits by offering an editable field in the template to add <qemu:commandline>, and also offer a dropdown for the network card to allow selecting a model?

     

    Thank you in advanced :)

    • Like 3
    • Upvote 1

    Qemu 3.1

    in Feature Requests

    Posted

    3 hours ago, limetech said:

    Added to Unraid 6.7

    Is there any ETA on Unraid 6.7? I am looking forward to the improvements in QEMU 3.1. Could we see Unraid 6.7 as a holiday season release??