subwars
-
Posts
194 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by subwars
-
-
ok i belive i did everything right.. followed all the steps in the wiki.
copied the files for the gui.
installed the unmenu web package thing.
went into the webserver settings put in the location and port
clicked on it and the web interface for vbox opened and asked me to log in
i used what i guess would be
admin
admin
and now all i get is a blank greyish page
also can't access the webserver eiteher goto server:89 and get an internal server error.. restarted.. got it back, restarted the webserver thing.. and again grey page, and can't access port 89 page anymore
-
Unraid 5 Beta 2 is from August 10, 2010, 09:32:21
That is the longest beta for a commercial product I have ever seen.....
You haven't been around much then.
i donno how long that took... but how about diablo 3.
-
yay, now to get that version 5 finished
-
ok been away for the last few days so havn't manage to report but.. i did the sync again.. had no syn errors but had another 125 disk errors. so the web gui is showing 250 errors atm.
did another short test and report
the system han't been restarted at all since the initial power failure, either, so if i needed to do a restart before doing another smart test, then yea...
smartctl -a -d ata /dev/sda smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: SAMSUNG HD204UI Serial Number: S2H7JD6B102899 Firmware Version: 1AQ10001 User Capacity: 2,000,398,934,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 6 Local Time is: Mon Feb 27 12:14:30 2012 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (20760) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 367 2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0 3 Spin_Up_Time 0x0023 068 061 025 Pre-fail Always - 9890 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 668 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1134 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 28 181 Program_Fail_Cnt_Total 0x0022 100 100 000 Old_age Always - 30707 191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 2698 192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0 194 Temperature_Celsius 0x0002 064 054 000 Old_age Always - 31 (Lifetime Min/Max 19/46) 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 252 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 3 200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 3608 223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0 225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 668 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 1133 - # 2 Short offline Completed: read failure 90% 1115 1010982376 Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
-
ok joe i'll let it do another parity sync
-
ok i'll pull it out and reset the cable, and do another smart test? or do that initconfig thing?
-
i shutdown through the web interface.
here is the smart report.. i did it though unmenu. clicked short smart test, then clicked smart status report 10 mins later
smartctl -a -d ata /dev/sda smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: SAMSUNG HD204UI Serial Number: S2H7JD6B102899 Firmware Version: 1AQ10001 User Capacity: 2,000,398,934,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 6 Local Time is: Thu Feb 23 10:47:28 2012 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: (20760) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 341 2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0 3 Spin_Up_Time 0x0023 068 061 025 Pre-fail Always - 9890 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 659 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1115 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 28 181 Program_Fail_Cnt_Total 0x0022 100 100 000 Old_age Always - 30707 191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 2698 192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0 194 Temperature_Celsius 0x0002 064 054 000 Old_age Always - 28 (Lifetime Min/Max 19/46) 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 3 200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 3607 223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0 225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 659 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 90% 1115 1010982376 Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed_read_failure [90% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
-
opps forgot to attach log
-
ok, i had to shutdown the server yesterday, power outage, ups kept it live while i loged in, stoped, and shutdown.
After starting back up, it started a parity sync. Odd i thought, but meh, it had been 2-3months since i last did one, and it was already 20% though by the time i realised, so i let it go.
Now i've receieved i belive 1 parity sync error and 121 parity disk errors, if i'm reading it right. Would like it if someone could check for me. If the 121 errors, are disk errors i'll pull it out and check the cable on the parity drive, well i'll replug all the cables, and run another parity?
-
and i'll ask again location?
-
location if still available?
-
So I'm going to need more storage before long... recently bought a 2tb external to keep me out of trouble, so should be ok for the time being, but still need to start considering my options.
My case is full atm 12 hdds 3 x 4 hdd cages in it, and no more space, apart from laying them on the bottom of the case.
So my first thoughts are either to get a bigger case. and either 1 replace current case, 2 do a whole new build for it, and have 2 servers, 3 just put a power supply in and somehow try and get longer cables to run over to the other case. Will need more pci sata cards as well. 8 on current board and a 4xpci for my 12 drives. (ps what are peoples thoughts on them sas card things?), 4 start replacing some of the smaller drives with bigger drives. have 3 750s and 4 1tb, that could be swaped out, but then what to do with the older smaller drivers. seems like a waste, unless i can get some decent money for them selling 2nd hand... which i kind of doubt.
So after opinions on what other people have done, when they have gotten to this point?
-
Hi, have just run preclear for the first time on a couple new 2tb drives. had them running simultaneously, and the difference the report gave was a fair bit, especially the g-sense, drive most of been dropped at some point by the looks of it? still says it passed though.
Anyway heres a copy past from unmenu
drive 1 - 26hrs 39mins to clear
SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 8 2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0 3 Spin_Up_Time 0x0023 068 068 025 Pre-fail Always - 9971 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 33 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3 181 Program_Fail_Cnt_Total 0x0022 100 100 000 Old_age Always - 154883 191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 29 192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0 194 Temperature_Celsius 0x0002 064 050 000 Old_age Always - 30 (Lifetime Min/Max 25/50) 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 7 223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0 225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 3
drive2 - 27hrs 18mins to clear
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 52 2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0 3 Spin_Up_Time 0x0023 068 068 025 Pre-fail Always - 9927 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 33 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3 181 Program_Fail_Cnt_Total 0x0022 100 100 000 Old_age Always - 30707 191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 254 192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0 194 Temperature_Celsius 0x0002 064 054 000 Old_age Always - 30 (Lifetime Min/Max 24/46) 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 13 223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0 225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 3
-
Are there any problems changing from ide to ahci. as far as causing problems with data corruption or anything?
My boards been in ide for some time now, from memory ahci used to cause problems? Remember you added a thing to disable the ncq at least anyway.
-
Make sure that you resolve the HPA issue fully. If your board does not turn off HPA by default then the problem will reoccur when CMOS is reset for any reason, e.g., the CMOS battery dies. Having the option to disable it is not good enough; the board must default to the off setting. Sometimes a BIOS update will fix the problem. Although, others have replaced their MB due to this problem. Motherboards the have HPA enabled by default are not suitable for unRAID. You don't want to be surprised by HPA in the future.
Well I just tested this, connected a couple more power and sata cables, getting everything prepped for the new drives this afternooon. And while i was doing all that i pulled the battery and turned the power off, to simulate what would happen.
When i turned it back I, i was hit by the gigabyte logo thing which is normal disabled... so first thought was buggar, but then after that it presented a menu with something like cmos error (can't remember exactly what it said but anyway), it had a list of default and last known good config, and a few others that you could save, in the save cmos to bios thing that i did.
It was defaulted at last known good with 15sec count down.. let it go and bam restarted with all the previous settings, with all the extras that i have disabled, re-disabled.
So i'm not going to have to sacrifice the good asus board in my main
I also ran the full surface scan on the parity drive using the samsung utiltiy last night.. and it came back clean.. so hopefully it was just a glitch.
-
do a long test?
that disk has 47 reallocated sectors. Nothing too bad, but watch it in the future and if the number increases, constantly, replace the drive.
Joe L.
as in bad sectors?
have pulled the server out and hooked upto my monitor, and ran the samsung diag tools just ran the short test, i'll do a full surface scan on it tonight when i goto bed, but it passed the quick test.
on another topic from yesterday about the hpa thing, i updated the bios and it gave the option to disable it, plus i did a save cmos to bios thing.. so hoping that fixes the part about it coming back in the event of battery going flat that was commented about
-
do a long test?
-
What does SMART for sdh report?
Statistics for /dev/sdh SAMSUNG_HD154UI_S1XWJ9ASB00115
smartctl -a -d ata /dev/sdh
smartctl version 5.38 [i486-slackware-linux-gnu] Copyright © 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG HD154UI
Serial Number: S1XWJ9ASB00115
Firmware Version: 1AG01118
User Capacity: 1,500,301,910,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 3b
Local Time is: Fri Feb 25 11:23:58 2011 EST
==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for details.
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (19417) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 34) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 099 051 Pre-fail Always - 16
3 Spin_Up_Time 0x0007 072 072 011 Pre-fail Always - 9320
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 727
5 Reallocated_Sector_Ct 0x0033 099 099 010 Pre-fail Always - 42
7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 095 095 015 Pre-fail Offline - 16876
9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 9406
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 78
13 Read_Soft_Error_Rate 0x000e 100 099 000 Old_age Always - 16
183 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
184 Unknown_Attribute 0x0033 100 100 000 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 19
188 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 070 055 000 Old_age Always - 30 (Lifetime Min/Max 26/33)
194 Temperature_Celsius 0x0022 070 053 000 Old_age Always - 30 (Lifetime Min/Max 24/36)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 1150713847
196 Reallocated_Event_Count 0x0032 099 099 000 Old_age Always - 42
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 100 099 000 Old_age Always - 60
201 Soft_Read_Error_Rate 0x000a 099 099 000 Old_age Always - 3
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 9406 -
# 2 Short offline Aborted by host 10% 4293 -
# 3 Short offline Completed without error 00% 2732 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
-
i'm in the same boat as your mazma, was discussing it last night, if you want to check my thread labeled "few questions"
yes that hdparm will get rid of it.. the problem is, if the hpa isn't disabled, it will just be re created. weather your option of setting it to dual bios has indeed disabled it.. well i don't know.
i'll do that fdisk for you as well bjp
edit: here ya go
Disk /dev/sdg: 1500.3 GB, 1500300828160 bytes 1 heads, 63 sectors/track, 46512302 cylinders, total 2930275055 sectors Units = sectors of 1 * 512 = 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdg1 63 2930275054 1465137496 83 Linux Partition 1 does not end on cylinder boundary.[\code]
-
Hi, i ran an unmenu verify but don't correct over night, and it's returned 0 errors, but has spat out 48 disk errors on the parity drive.
Now from what i can tell from the system log it looks as though the errors occurred towards the end for the drive, so I'm guessing it's not a cable problem? I'd imagine if it was the cable the errors would of been more frequent then just a few dozen blocks near the end together. So i'm guessing it's physical?
Anyway before i get to carried swapping cables, i'll check what you experts say.
I've attached the system log starting from last night, would be too big to attach the whole thing as it's been up for a few weeks. if more is needed let me know.
Thanks
-
god damit.. so 4.7 wont work with a hpa in place period?
-
just download the M/B manual and went through the bios settings in the manual, and couldn't find any reference to the hpa in it, must of been a different board i saw it
.. so does that mean if i get rid of it off the drive with hdpam, it will just come straight back after a reboot? -
pretty sure i did notice it and disable it already awhile ago, i'll have to pull it out and hook up a monitor to it to check
-
the fact they were new and didn't actually need to be zeroed anyway
This is wrong. New drives are not zeroed by the manufacturer. A new drive could be totally full of ones. There are no rules or standards for the content of new drives. They could be filled jpegs of Lena for all we know.
The reason that none of your new drives were cleared is because they we added as parity drives. The parity drive does not need to be cleared because it is written completely when parity is calculated.
Did you reuse any of the parity drive you replaced in unRAID? These drives would have to be cleared before they could be formatted.
yes the old parity drives became data drives, and unraid never cleared them at that stage either
edit: just checked my system log and that hpa error is in it.
Feb 9 20:32:46 Server kernel: ata7.01: HPA detected: current 2930275055, native 2930277168 (Errors)
.. so does that mean if i get rid of it off the drive with hdpam, it will just come straight back after a reboot?
VirtualBox in unRAID
in User Customizations
Posted
please explain