R-Rizzo

Ah, I get what your saying now. I do have a backup, but it is not as current as it should be. And there are several docker's that I've added and configured since my last backup. The docker's are all there and active/running. But since the corresponding XML files are missing I can't edit them. Do you know of a way to have Community Apps recreate them without reinstalling over the docker?

I was deleting them manually from "/boot/config/plugins/dockerMan/templates-user" Is there a backup stored somewhere else?

Annnnnd I just realized that I can no longer edit my current Dockers, I imagine because there is no corresponding .xml. I'm an idiot. Sent from my ONEPLUS A6013 using Tapatalk

Is there a way to manually refresh the User Templates? I was cleaning out old entries manually and got a little excited and deleted them all. I basically just want to to backup the paths/ports of my currently installed dockers.

I had restarted the server twice. Hadn't worked. Then I went it and unmounted it with fuserunmount -u user, rebooted and it's back. So somehow something had stuck. Seems to be working now. If it happens again, I'll grab a log before I restart and we'll go from there.

So all 5 of my dockers took a crap today. After about an hour of messing around with everything I found the culprit and have setup a work around but I'm trying to figure out what happened. Long story condensed. All 5 of my dockers referenced /mnt/user in someway. I keep all the configuration files on the cache drive and that's just how it got set up. Now I have them directly pointing to /mnt/cache/"Insert Appropriate Folder Here". But while digging around I discovered that /mnt/user is no longer a vaild point. Here is an appropriate screen shot. Any ideas? Will this seriously affect anything else. I no longer have anything pointing to /mnt/user anywhere on the system. EDIT: SO I'm an idiot, I just figured out why this is bad. I have several episodes of shows that are still on the cache drive. So all my paths that are pointing to /mnt/user0 obviously cant see them.... Now I just need to figure out how to get /mnt/user to come back.....

Were you able to pass through the PCI usb controller to the VM and get hot plug support? I have this exact motherboard and am having problems isolation the motherboard pci controllers.

I had this this exact same problem on my ASRock H97M Pro 4. I couldn't get any thing to pass through until I added an old GPU in my primary PCI-E slot. My CPU has no onboard video. Did you end up leaving the old GPU in? I didn't try removing it and starting the VM, but I have a feeling it won't work without the old one in place for unraid to use. I did end up leaving it in. If I took it out, even with the GPU I wanted to pass through in the second Pci-E slot, it wouldn't work

I had this this exact same problem on my ASRock H97M Pro 4. I couldn't get any thing to pass through until I added an old GPU in my primary PCI-E slot. My CPU has no onboard video.

+1, fwiw

Well I got it to work. The work around is not ideal. But it's up and running. Basically, my motherboard is one of the ones that does not like to pass through primary PCI-E slot. When I had my EVGA 750ti in the primary PCI-E Slot I had all the problems as above. I plugged in an old ati 5750 in the pci express 2.0 Slot and created a new VM. Boom, booted right up when using the secondary GPU. Switched GPU's. Put the ati in PCI-E 3.0 and the EVGA in PCI-E 2.0 and then the EVGA worked fine and the ati had no screen. Tried booting with the EVGA in PCI-E 2.0 and nothing in PCI-E 3.0. And no dice. So basically I have to have a GPU that I'm not going to use in the PCI-E 3.0 slot and the GPU I'm going to pass through in the PCI-E 2.0 slot and everything works great. Although now I'm out of PCI-E slots which is going to affect future upgrade paths but I'm Just glad it's working now. Should be mentioned for anyone who comes across this later I'm running an ASRock H97M Pro4 with a Intel Xeon E3-1231v3 (With no integrated GPU) which may or may not be the issue. And a EVGA 750Ti SC GPU.

Affirm, Code 43 disabled. With the windows default driver, latest Nvidia, and most recently with 340.52

And do I just remove this from my xml? Thanks in advance for your help. I can also provide a copy of my XML and logs if that would help. Sincerely, Rob If you used unRAID to create your VM and assign an NVIDIA GPU to it, we automatically take care of all this for you. Well pewp.... I'm getting absolutely nothing out of my card. No flickers. Just a "no signal" from my monitor. Doesnt matter what guest is I'm using. I'm pretty sure I'm overlooking something. I'll post XML and logs when I get home tonight. Have you tried all the suggestions in the wiki (see link in my signature for the manual)? Going through that, nothing is standing out that I missed. I'll go through it again step by step tonight Have you tried both OVMF and SeaBIOS? Have you tried loading the GPU ROM? Yeah, I have a windows based seabios and a Ubuntu based ovfm. Can access both with rdp and vnc respectively. I have the ROM passed through on the windows vm but not the Ubuntu. That got rid of the "invalid" rom contents error in the log. Both are still exhibiting the same behavior. No signal like the HDMI cable isn't even plugged in.

And do I just remove this from my xml? Thanks in advance for your help. I can also provide a copy of my XML and logs if that would help. Sincerely, Rob If you used unRAID to create your VM and assign an NVIDIA GPU to it, we automatically take care of all this for you. Well pewp.... I'm getting absolutely nothing out of my card. No flickers. Just a "no signal" from my monitor. Doesnt matter what guest is I'm using. I'm pretty sure I'm overlooking something. I'll post XML and logs when I get home tonight. Have you tried all the suggestions in the wiki (see link in my signature for the manual)? Going through that, nothing is standing out that I missed. I'll go through it again step by step tonight

And do I just remove this from my xml? Thanks in advance for your help. I can also provide a copy of my XML and logs if that would help. Sincerely, Rob If you used unRAID to create your VM and assign an NVIDIA GPU to it, we automatically take care of all this for you. Well pewp.... I'm getting absolutely nothing out of my card. No flickers. Just a "no signal" from my monitor. Doesnt matter what guest is I'm using. I'm pretty sure I'm overlooking something. I'll post XML and logs when I get home tonight.