Katherine
-
Posts
66 -
Joined
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by Katherine
-
-
This is a good addition. I have read my fair share of troubleshooting posts from Larry which is sort of how I've learned Unraid. Congrats @ljm42!
-
1
-
1
-
-
I received the message in the log to switch to PIA's next-gen network:
VPN configuration file '/config/openvpn/openvpn.ovpn' 'remote' line is referencing PIA legacy network which is now shutdown, see Q19. from the following link on how to switch to PIA 'next-gen':- https://github.com/binhex/documentation/blob/master/docker/faq/vpn.md exiting script...
I downloaded the next-gen ovpn config file from the link in the FAQ. I used the same credentials.conf as my previous settings but replaced everything else. This my ovpn file:
client dev tun proto udp remote de-berlin.privacy.network 1198 resolv-retry infinite nobind persist-key cipher aes-128-cbc auth sha1 tls-client remote-cert-tls server auth-user-pass credentials.conf compress verb 1 crl-verify crl.rsa.2048.pem ca ca.rsa.2048.crt disable-occFor some reasons, I am unable to connect and I keep getting AUTH_FAILED error in a loop which freezes the Unraid webui.
DEBG 'start-script' stdout output: AUTH: Received control message: AUTH_FAILED DEBG 'start-script' stdout output: SIGTERM[soft,auth-failure] received, process exitingHas anyone encountered this problem?
-
3 hours ago, tknx said:
So I have lots of weirdness going on. No request for authentification. I can't get the mic to work in the chat since I am set to muted/no video and can't unset it. But when I click on the little arrow, I can see the meter go up and down when I talk and I can see a preview video.
...And I get thrown off a bunch.
I suspect it has to to do with my reverse proxy and https issues since WebRTC won't work without it. What sucks is I don't think there is a way to test WebRTC without https just to make sure.
I had similar issues but it was due to browser permissions. I've since switched to Jitsi apps and haven't had any issues since.
On 4/24/2020 at 12:11 AM, Michael Woodson said:It looks like I have resolved this issue by commenting out this line of the lets-encrypt jitsimeet.subdomain.conf config file. Now things only direct to https.
Did you managed to figure out a way to redirect visitors from the "meet.domain.com" to "https://meet.domain.com/"? Doesn't work automatically for me.
-
8 hours ago, SpaceInvaderOne said:
Here is a video guide for setting up Jitsi
Thank you for this guide @SpaceInvaderOne. Had Jitsi docker up and running before the video was over. 😆
Out of curiosity, how does one update this docker? Should we re-clone the repo and compose the dockers again?
-
Not sure about docker but I'm running Jitsi Meet on an Ubuntu VM using this ansible playbook.
-
I removed the old container, image and started fresh. I don't see the message in the logs anymore. 👍
-
9 hours ago, aptalca said:
Dns via container name doesn't handle uppercase. It has to be all lowercase. You need to change the container name to bitwarden
And... it is working. 😎
Thank you so much.
I've started getting this warning in the log file since I started using stream:
nginx: [warn] could not build optimal variables_hash, you should increase either variables_hash_max_size: 1024 or variables_hash_bucket_size: 64; ignoring variables_hash_bucket_size
Looking up the documentation, this is related to stream:
Syntax: variables_hash_bucket_size size; Default: variables_hash_bucket_size 64; Context: stream Syntax: variables_hash_max_size size; Default: variables_hash_max_size 1024; Context: stream
I'm wondering where should I place these settings? Under proxy-confs or site-confs? or in nginx.conf?
-
Is there a way to supress this message somehow?
2019-02-06 04:55:27,868 DEBG 'watchdog-script' stdout output: [info] Nginx log file does not exist, skipping log rotation 2019-02-06 04:55:58,003 DEBG 'watchdog-script' stdout output: [info] Nginx log file does not exist, skipping log rotation 2019-02-06 04:56:28,136 DEBG 'watchdog-script' stdout output: [info] Nginx log file does not exist, skipping log rotation 2019-02-06 04:56:58,270 DEBG 'watchdog-script' stdout output: [info] Nginx log file does not exist, skipping log rotation 2019-02-06 04:57:28,404 DEBG 'watchdog-script' stdout output: [info] Nginx log file does not exist, skipping log rotation
-
Docker: Bitwarden
Issue: 502 Bad Gateway Error
I'm able to access Bitwarden from a subdomain but only if I hardcode the docker IP address in the conf file. When using upstream, I get a 502 error. Not sure what I'm doing wrong.
I used this sample radarr conf:set $upstream_radarr radarr; proxy_pass http://$upstream_radarr:7878;
This should work but I get a 502 error. The name of the docker container begins with a capital letter so no typo here.
set $upstream_bitwarden Bitwarden; proxy_pass http://$upstream_bitwarden:80;The conf with the hardcoded IP that works:
# make sure that your dns has a cname set for bitwarden server { listen 443 ssl; listen [::]:443 ssl; server_name bitwarden.*; include /config/nginx/ssl.conf; client_max_body_size 0; # enable for ldap auth, fill in ldap details in ldap.conf #include /config/nginx/ldap.conf; location / { # enable the next two lines for http auth #auth_basic "Restricted"; #auth_basic_user_file /config/nginx/.htpasswd; # enable the next two lines for ldap auth #auth_request /auth; #error_page 401 =200 /login; include /config/nginx/proxy.conf; resolver 127.0.0.11 valid=30s; set $upstream_bitwarden Bitwarden; proxy_pass http://10.10.8.28:80; } }Note: The conf works even without adding "set $upstream_bitwarden Bitwarden;".
-
My eyes thank you, Tom. 😊
On 12/3/2018 at 2:47 PM, LammeN3rd said:Really love this option!!!
update went great!
Updated as soon as I saw this screenshot. Thank you so much for sharing this.
How did you manage to hide the text from the icons in the header menu? I tried looking around in the Display settings but couldn't find the right setting.
-
@Djoss Thank you so much for the offer. I'll do some testing on rar/zip files and then PM you the logs by next week.
I used WinRAR to extract this archive and it went well. I'm fairly certain this is not an archive specific issue because I haven't been able to extract anything. Not sure what I am doing wrong. Is it a settings issue? or permissions issue? I'm hoping I can figure it out so I can avoid firing up the Windows VM just to extract archives. 😁
-
It just says "Failed".
1543026527953 - Archive Name: Cake.me_W4F-TBU.720p 1543026527954 - Archive Path: /output/fin/Movies/Cake Wars/Cake.me_W4F-TBU.720p.part1.rar 1543026527954 - Date:Fri Nov 23 20:28:47 UTC 2018 1543026527954 - Start Extracting 1543026527955 - Extension Setup: { "blacklistpatterns" : [ "##Lines with ## are comments", "## Use / as path seperator", "##Example to skip extraction of sample folder files", ".*\\.jpe?g", ".*\\.html?", ".*\\.nfo", ".*\\.txt", ".*\\.url" ], "deepextractionenabled" : true, "deletearchivefilesafterextractionaction" : "NULL", "flushmode" : "NONE", "deleteinfofilesafterextraction" : false, "maxcheckedfilesizeduringoptimizedpasswordfindinginbytes" : 1024000, "iffileexistsaction" : "SKIP_FILE", "askforunknownpasswordsenabled" : true, "customextractionpathenabled" : false, "subpath" : "%PACKAGENAME%", "bubblecontentarchivenamevisible" : true, "latestiffileexistsaction" : "OVERWRITE_FILE", "deletearchivedownloadlinksafterextraction" : true, "bubblecontentextracttofoldervisible" : true, "lastworkinglibid" : "Linux-amd64", "subpathenabled" : true, "enabled" : true, "useoriginalfiledate" : true, "freshinstall" : false, "guienabled" : false, "writeextractionlogenabled" : true, "bubblecontentcircleprogressvisible" : true, "passwordfindoptimizationenabled" : true, "iomodeforcrchashing" : "NORMAL", "bubbleenabledifarchiveextractionisinprogress" : true, "subpathminfolderstreshhold" : 0, "restorefilepermissions" : true, "bubblecontentstatusvisible" : true, "customextractionpath" : "/output/fin/Movies/<jd:packagename>", "cpupriority" : "HIGH", "passwordlist" : [ "Cake.me" ], "subpathminfilesorfolderstreshhold" : 2, "bubblecontentdurationvisible" : true, "subpathminfilestreshhold" : 0, "askforpassworddialogtimeoutinms" : 600000, "oldpwlistimported" : true, "deepextractionblacklistpatterns" : [ "##Lines with XX are comments", "##Skip deep extraction of archives that contain binary files", ".*\\.exe", ".*\\.msi", ".*\\.bat", ".xbe", ".elf", ".sh" ], "bubblecontentcurrentfilevisible" : true } 1543026527955 - Archive Setup: { "autoExtract" : "UNSET", "extractionInfo" : null, "extractPath" : null, "finalPassword" : null, "ifFileExistsAction" : null, "passwords" : [ ], "removeDownloadLinksAfterExtraction" : "UNSET", "removeFilesAfterExtraction" : "UNSET" } 1543026527955 - Start unpacking of /output/fin/Movies/Cake Wars/Cake.me_W4F-TBU.720p.part1.rar 1543026527955 - (DownloadLinkArchiveFile)File:/output/fin/Movies/Cake Wars/Cake.me_W4F-TBU.720p.part1.rar|FileArchiveFileExists:true|FileSize:1572864000 1543026527955 - (DownloadLinkArchiveFile)File:/output/fin/Movies/Cake Wars/Cake.me_W4F-TBU.720p.part2.rar|FileArchiveFileExists:true|FileSize:1572864000 1543026527955 - (DownloadLinkArchiveFile)File:/output/fin/Movies/Cake Wars/Cake.me_W4F-TBU.720p.part3.rar|FileArchiveFileExists:true|FileSize:1572864000 1543026527955 - (DownloadLinkArchiveFile)File:/output/fin/Movies/Cake Wars/Cake.me_W4F-TBU.720p.part4.rar|FileArchiveFileExists:true|FileSize:1083426531 1543026527955 - Prepare 1543026527956 - Failed
-
I'm unable to get extraction working on this docker. Not sure what I'm doing wrong. Extraction is enabled in the settings and there is plenty of space on the drive. I'm able to extract the rar files manually but jdownloader refuses to extract anything.
-
I'm currently locked out of the BMC and I need to change the IP address and DHCP. Is this possible? or do I need to reset BMC and start fresh?
-
Thank you, @Bungy
Can you also include the following modules?
py2-requests-oauthlib py2-markdown py2-decorator
These are for Subliminal.
-
NZBGet 20 is out.
https://nzbget.net/history-latest -
7 hours ago, binhex said:
/media is a separate volume mapping used to point at your existing media (normally on your array) i would advise keeping /media seperate to where you download files to.
I'll change that.
Though my question is that Sonarr and Radarr have /downloads as the default container path like:
/downloads /mnt/cache/appdata/media/So can I change /downloads container path to /data without any issues? Just so that all the docker and their paths are consistent.
-
@binhex I tend to use the /media mapping so in terms of sonarr and radarr, is it really as simple as changing the default /download mapping to /media? Or is there other stuff that needs to be updated once I switch from the default /download mapping? I'm sorry I'm not well versed in either sonarr and radarr.
On a side note, is there any difference to using /mnt/cache/appdata/Downloads/ as oppose to /mnt/user/appdata/Downloads/?
-
8 hours ago, superderpbro said:
This guide is kinda old. Does the OP's method still work?
And if so is this correct?
Depends on which docker container you use. For Plex docker from LinuxServer.io, you can simply add
-v /tmp:/transcode
under Extra Parameters. You will need to toggle the Basic View to Advance View to get to Extra Parameters.
-
Thank you @Bungy for the update.
I updated the docker and restored the default shebang (#!/usr/bin/env python) but that only made all the scripts throw errors. So I'm back to using the shebang you suggested (#!/usr/sbin/python2) and now all the scripts are working with the exception of one. The script in question is Subliminal. It does state on their GitHub repo that they support Python 2.6 and it was working fine when I was using LinuxServer's NZBGet docker. I did reset permissions after I switched over to your docker just to be safe.
Here's the error Subliminal throws with the default shebang (#!/usr/bin/env python):
ERROR Mon Oct 30 2017 04:43:41 Post-process-script Subliminal/Subliminal.py for c80122f7a8dc35d02d918f0b7aaaa0fe failed (terminated with unknown status) INFO Mon Oct 30 2017 04:43:41 Subliminal: SyntaxError: invalid syntax INFO Mon Oct 30 2017 04:43:41 Subliminal: ^ INFO Mon Oct 30 2017 04:43:41 Subliminal: except ConfigException, e: INFO Mon Oct 30 2017 04:43:41 Subliminal: File "/media/scripts/Subliminal/Subliminal.py", line 2435 INFO Mon Oct 30 2017 04:43:41 Executing post-process-script Subliminal/Subliminal.py for c80122f7a8dc35d02d918f0b7aaaa0fe
I'm using Subliminal 1.0.0 though I've also tried Subliminal 0.10.0 without any success.
-
Thank you @Bungy once again. I did change the shebang in all the scripts to
#!/usr/sbin/python2from
#!/usr/bin/env pythonWith the exception of one script, I got all the scripts working. Oddly enough, when I check the documentation for the failed script it does say that the script will work with Python 2.6 and above so I'm not entirely sure what is going on.
-
Thank you @Bungy, I'll generate a certificate.
I also had all my scripts terminate with unknown status. Is this an issue with the Python folder? Any suggestions how to fix this?
ERROR Tue Oct 24 2017 22:31:12 Post-process-script Others/ResetDateTime.py for Ubuntu-16.04.1-server-I386 failed (terminated with unknown status) INFO Tue Oct 24 2017 22:31:12 ResetDateTime: /usr/bin/env: ‘python’: No such file or directory INFO Tue Oct 24 2017 22:31:12 Executing post-process-script Others/ResetDateTime.py for Ubuntu-16.04.1-server-I386 ERROR Tue Oct 24 2017 22:31:12 Post-process-script Others/DeleteSamples.py for Ubuntu-16.04.1-server-I386 failed (terminated with unknown status) INFO Tue Oct 24 2017 22:31:12 DeleteSamples: /usr/bin/env: ‘python’: No such file or directory INFO Tue Oct 24 2017 22:31:12 Executing post-process-script Others/DeleteSamples.py for Ubuntu-16.04.1-server-I386 -
In NZBGet, I enabled CertCheck under Security and now I'm getting a bunch of errors:
ERROR Tue Oct 24 2017 15:20:46 Could not set certificate store location: error:0B084002:x509 certificate routines:X509_load_cert_crl_file:system lib ERROR Tue Oct 24 2017 15:20:46 Could not set certificate store location: error:2006D080:BIO routines:BIO_new_file:no such file ERROR Tue Oct 24 2017 15:20:46 Could not set certificate store location: error:02001002:system library:fopen:No such file or directoryDoes the NZBGet docker container already have the cacert.pem?
-
4 hours ago, binhex said:
You're trying to connect to flood webui on port 5000 right!
Sent from my SM-G900F using Tapatalk
I sure am now.
Though I still can't access Flood webui. Do I need to download Flood separately somewhere?
I did notice something odd. After I've removed rTorrentVPN container and the image, docker doesn't pull everything for a new installation. For a bunch of stuff it says, "Already exists". I checked if there were orphaned images in the UI and through SSH but couldn't find any. I also deleted all the files in the appdata directory before the pull.
IMAGE ID [latest]: Pulling from binhex/arch-rtorrentvpn. IMAGE ID [7368fdad902f]: Already exists. IMAGE ID [63103ef8f895]: Already exists. IMAGE ID [886bc19fa75a]: Already exists. IMAGE ID [5ebe09dc3070]: Already exists. IMAGE ID [eda8514a153b]: Already exists. IMAGE ID [32f9f48aa48d]: Already exists. IMAGE ID [c95dcf8376ee]: Already exists. IMAGE ID [ac8f0f660af6]: Already exists. IMAGE ID [8a4b14f9a6c3]: Already exists. IMAGE ID [993283da8e1e]: Already exists. IMAGE ID [87106dcd4d9f]: Already exists. IMAGE ID [98f82b52e736]: Already exists. IMAGE ID [ef5a49354e56]: Already exists. IMAGE ID [4f735333349d]: Already exists. IMAGE ID [85a5678a4d9d]: Already exists. IMAGE ID [88049a5340b6]: Pulling fs layer. Download complete. Extracting. Pull complete. IMAGE ID [9b7735f4d0de]: Pulling fs layer. Download complete. Extracting. Pull complete. IMAGE ID [7dd04ee3c1ac]: Pulling fs layer. Downloading 100% of 2 KB. Download complete. Extracting. Pull complete. IMAGE ID [0386d78bf9fc]: Pulling fs layer. Downloading 100% of 4 KB. Download complete. Extracting. Pull complete. IMAGE ID [51847e98f26f]: Pulling fs layer. Downloading 100% of 5 KB. Download complete. Extracting. Pull complete. IMAGE ID [582bbac0db72]: Pulling fs layer. Downloading 100% of 86 MB. Verifying Checksum. Download complete. Extracting. Pull complete. Status: Downloaded newer image for binhex/arch-rtorrentvpn:latest TOTAL DATA PULLED: 86 MB
[Support] binhex - rTorrentVPN
in Docker Containers
Posted
I was using the "PPTP/L2TP/SOCKS" username and password which starts with an x--------.
With the next-gen network, PIA wants everyone to use their login username and password which start with p--------. Once I switched credentials, I was able to authenticate right away.