alturismo
-
Posts
6,203 -
Joined
-
Last visited
-
Days Won
48
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by alturismo
-
-
32 minutes ago, saarg said:
I almost said RTFM, but now I don't have to
You do get the choice to choose branch when installing through CA, but no choice when it's already installed. Then you have to add the tag yourself.
The release-4.2 will get whatever the latest stable for 4.2 is.
RTFM ...it would have been the right answer ... i know
and i ve choosen 4.2 and its perfect as before, thanks again.
Have a good weekend
-
thanks alot, changed to stable branch and all is good
didnt noticed tags to choose ... my fault
-
1 minute ago, s.Oliver said:
yep, noticed the change as well. since then, safari (on macOS) also only shows the epg-tab – nothing else (and btw. it even takes firefox a second or two before it displays the other tabs). before that change, both browsers did show all tab instantly.
true, the 1-2 sec. delay is also here when using IP directly ... reverse proxy as mentioned above ... chrome and IE.
what i also see is when keeping the epg window open it refreshes every few seconds and .. may that helps figure out ...
2017-08-19 11:10:40.046 [ ERROR] http: 192.168.1.2: HTTP/1.1 GET /comet/ws -- 415
2017-08-19 11:10:44.992 [ ERROR] http: 192.168.1.2: HTTP/1.1 GET /comet/ws -- 415
2017-08-19 11:10:51.233 [ ERROR] http: 192.168.1.2: HTTP/1.1 GET /comet/ws -- 415 -
Hi, as im running TVH behind my apache reverse proxy and it seems to be broken since update from 04th or 5th august (only working EPG window) i would like
to ask if there is a way to rollback to a "older" build ?
i guess TVH changed something with their http header ...
it works when i use IP:9981 (internal and external), but not when i use my reverse proxy anymore ... then only EPG windows ...
thanks ahead fo an tip.
-
On 10.8.2017 at 5:14 PM, unJim said:
I'm trying to get tvhproxy working but Plex doesn't find it, makes no difference if I supply it with the IP address of the docker.
If I go to http://192.168.1.159:5004 (the IP address I have assigned to tvhproxy) with a web browser it returns a 404 error which the tvhproxy docker logs show so it's kind of running but something isn't right. Does anybody have this working?
yes, i guess u have a common setup as i do, plex, tvh and proxy all on unraid, if u assign a ip to tvhproxy it cant be accessed by the other dockers, i assume some sort of security,
u need all dockers assign an ip ... tvh, plex and tvhproxy, then it works.
the webgui of the proxy (192.x.x.x:5004) will always end up in 404, doesnt matter.
-
On 25.7.2017 at 10:53 PM, jonp said:
So in short, the issue is specific to UEFI boot when you create a Windows VM and pass through the integrated graphics device. Does the mouse disappear if you use a different OS for the VM? Perhaps something Linux based? This would be helpful to know.
good morning
so, i gave it another try now and sadly cant give any feedback with ubuntu.
6.3.5
1st, installed a ubuntu VM and tested function, all fine.
upgrade to 6.4rc7a
boot legacy
win10 vm, all good
ubuntu vm, all good
boot uefi
win10 vm, 1st no boot screen, 1st screen i see is the logon screen, nvm, but still no visible mouse (working but invisible)
ubuntu vm, no boot screen or any screen at all ... i see monitor turns on, but stays on black screen ... so cant tell if theres a mouse or not
tried then several mashine types up to 2.9, no change ... screen stays black ... also no log entries ...
sorry ...
-
On 25.7.2017 at 10:53 PM, jonp said:
So in short, the issue is specific to UEFI boot when you create a Windows VM and pass through the integrated graphics device. Does the mouse disappear if you use a different OS for the VM? Perhaps something Linux based? This would be helpful to know.
i ll give it a try on sunday (working till saturday here), and as my VM´s also gets messed up on upgrade (somehow the harddrive assignements doesnt keep saved) its not a quick switch and back for me
thankf for taking a look
-
4 hours ago, Squid said:
Any manual changes to the xml are lost if you make any changes to the template.
Sent from my LG-D852 using Tapatalk
i know that all xml manual changes are lost when using the template, but here its currently that especially the disk settings are "resetted" ...
always go back to "auto", roughly the correct path seems to be there, but it doesnt boot ... always flickering screen on memtest, says mamtest ok, and so on ... but really flickering,
completely out of sync.
update, just downgraded to 6.3.5 and VM booting again, just as note, sadly log doesnt say anything decent ...
-
Hi,
after some sorts of issues with my Media VM i recognize that the disk settings are always setted to auto instead keeping the manual setup, path and sata ...
like this it will always fail to boot after the memory test screen ...
for an tip thanks ahead.
-
4 hours ago, limetech said:
This is fixed in the next release.
great news, thanks for the info
-
+1 same here
also a 22:9 Display here and its alot og head turning
-
Hi,
i changed from legacy to uefi and now on my VM (win10) my mouse cursor dissappeared, only way to see it to activate the mouse tracker ...
booting is a bit faster, also no windows logo on boot, that doesnt matter
may someone with an ides, i ll test some bios settings about fast boot and so on to check ...
thanks ahead
Update
ok, tested now several things.
ahead, this only happens on IGD Intel (in my case KabyLake 7700) passthrough VM, not on Nvidia GTX1070 VM.
turned all fastboot options off, always same behavior, no more mouse cursor visible, usable but not visible (only when enabling mouse tracker).
also no windows boot screen on uefi boot, only black and then the logon screen appears, not a real issue but may come together ...
cause the VM booting shouldnt be affected if the Unraid OS is loaded by uefi or legacy i assumed.
back to legacy boot now and all is fine again, visible mnouse cursor and boot screen ...
btw, seems with 6.4 the "scrambled" boot screen from before driver loading on Intel IGD is also fixed, very nice
so now u can install the OS directly withouth starting with VNC unless u want to "click and try" ...
i ll test this again when next releases come up, for now i stay on legacy.
my goal was if i could speed up the boot sequence with my Emulex 10gb NIC, but didnt change anyway, so nvm
- 1
-
thanks, i ll rather stay on 1500 ... dunno if all clients etc can take 9000 properly.
now last step is somehow get the card boot faster, takes > 2min to pass init screen, no real big deal cause server shouldnt reboot to often, but ...
thanks again for all the advices and help.
-
finally, the HP card with emulex is working
may some tipps about MTU, stay at 1500 or set higher ?
-
couldnt find an affordable broadcom card, tomorrow my HP with Emulex Chipset will arrive, i hope these drivers are included
-
ok, i may will try then another card an no intel currently.
HP CN1000E 2x 10Gbit SFP+ looks ok, based on emulex wich should be quite compatible.
Thanks for the infos
-
@limetech, thanks for the info, so i can stop trying atm.
just to clarify for me, when i read this now correctly, currently no intel will probably work, also not an "unbranded" one.
another option would be the Synology E10G15-F1, its the same as Tehuti TN9310: 10GbE SFP+, just different color.
may i ask about the brocade one (i had before but also no driver support), may gets added in 6.4 ?
roughly i already bought me passive cables and i think the brocade only runs with active
cause the mellanox ones ... are not compatible with my board, system stalls on boot completely.
thanks ahead.
-
tried now all kinda usb live dists ... none really working properly on pc, i assume the 2 GPU´s are not nice for live
stick working fine on laptop ... i ll check again when i get the stick running.
when i check your link, all i see is the modprobe sfp edit wich i already tried, anything else i could test in ubuntu enviroment when im in there ?
i get the stick running without persistent mode, so i could check some more exept the modprobe ...
-
thanks for the links, but thats not my skill to check the unraid kernel if that driver is loaded or if its in the right place
also i dont see any error message that the sfp module would be unsupported ... all i see in syslog is the modprobe command ... but no respond or anything.
so i ll try to get another replacement with an original not branded Intel card, may that will help if its not from supermicro ... cant really imagine that there should be any difference,
but who knows
thanks again for the advices, sadly no luck here
-
58 minutes ago, uldise said:are you running this command with sudo?
the modprobe command, yes
the lspci -v not
now sudo lspci -vi added the onboard ethernet in paste, there is the kernel driver loaded, but not for the intel one,
i guess i just have no luck with NICs ...
03:00.0 Ethernet controller: Intel Corporation Device 0001 (rev 01)
Subsystem: Device 1b52:10fb
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at 2000000000 (64-bit, prefetchable)
I/O ports at d020
Memory at 2000100000 (64-bit, prefetchable)
Expansion ROM at df580000 [disabled]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
Capabilities: [70] MSI-X: Enable- Count=64 Masked-
Capabilities: [a0] Express Endpoint, MSI 00
Capabilities: [e0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 00-25-90-ff-ff-97-10-98
Capabilities: [150] Alternative Routing-ID Interpretation (ARI)
Capabilities: [160] Single Root I/O Virtualization (SR-IOV)03:00.1 Ethernet controller: Intel Corporation Device 0001 (rev 01)
Subsystem: Device 1b52:10fb
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at 2000080000 (64-bit, prefetchable)
I/O ports at d000
Memory at 2000304000 (64-bit, prefetchable)
Expansion ROM at df500000 [disabled]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
Capabilities: [70] MSI-X: Enable- Count=64 Masked-
Capabilities: [a0] Express Endpoint, MSI 00
Capabilities: [e0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 00-25-90-ff-ff-97-10-98
Capabilities: [150] Alternative Routing-ID Interpretation (ARI)
Capabilities: [160] Single Root I/O Virtualization (SR-IOV)05:00.0 Ethernet controller: Qualcomm Atheros Device e0b1 (rev 10)
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7a78
Flags: bus master, fast devsel, latency 0, IRQ 19
Memory at df400000 (64-bit, non-prefetchable)
I/O ports at c000
Capabilities: [40] Power Management version 3
Capabilities: [58] Express Endpoint, MSI 00
Capabilities: [c0] MSI: Enable- Count=1/16 Maskable+ 64bit+
Capabilities: [d8] MSI-X: Enable+ Count=16 Masked-
Capabilities: [100] Advanced Error Reporting
Capabilities: [180] Device Serial Number ff-b3-82-ac-4c-cc-6a-ff
Kernel driver in use: alx
Kernel modules: alx -
ok, live usb running, also not loaded ... access denied in Capabilities, so also no driver loaded
also same, router says connected (pic) ... so hardware seems ok, no driver support.
03:00.0 Ethernet controller: Intel Corporation Device 0001 (rev 01)
Subsystem: Device 1b52:10fb
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 2000000000 (64-bit, prefetchable)
Region 2: I/O ports at d020
Region 4: Memory at 2000100000 (64-bit, prefetchable)
Expansion ROM at df580000 [disabled]
Capabilities: <access denied>03:00.1 Ethernet controller: Intel Corporation Device 0001 (rev 01)
Subsystem: Device 1b52:10fb
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 10
Region 0: Memory at 2000080000 (64-bit, prefetchable)
Region 2: I/O ports at d000
Region 4: Memory at 2000304000 (64-bit, prefetchable)
Expansion ROM at df500000 [disabled]
Capabilities: <access denied> -
ok, i ll try, never used live cd (usb) ... dunno if all necessary is loaded in live mode ...
-
Same results ...
should a ubuntu live do it to see ? from USB ?
-
ok, i ll try a reboot, no error in cmd
Question Docker with seperate IP
in Prerelease Support [DEPRECATED]
Posted · Edited by alturismo
Hi,
just would like to ask if i understand this correctly, as soon as i setup an docker with an sep IP adress its not able to communicate with other dockers or the host anymore ?
example (unraid is 192.168.1.2)
apache (mainly as reverse proxy for)
plex
tvheadend
guacamole
unraid webgui
...
as soon as i put apache for example on an sep IP (192.168.1.12) i would have to put all on sep IP adresses so they can communicate with each other ?
one thing i would loose for sure then would be to have unraid webgui behind my reverse proxy cause there seems to be no way to reach the host anymore ?
the rest could be solved by putting them all on sep ip adresses (in the same netmask 192.168.1.x).
thanks ahead for an info if i see this correctly ?