ilovegoodnugz

http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=422169&sku=C13-2810 $20 free ship after rebate. Can't beat it.

ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 095 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 168 100 050 Pre-fail Offline - 162 3 Spin_Up_Time 0x0007 106 099 024 Pre-fail Always - 492 (Average 447) 4 Start_Stop_Count 0x0012 099 099 000 Old_age Always - 6544 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 1 (0, 1) 7 Seek_Error_Rate 0x000b 100 076 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 132 100 020 Pre-fail Offline - 33 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 4045 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 6539 192 Power-Off_Retract_Count 0x0032 095 095 000 Old_age Always - 6548 193 Load_Cycle_Count 0x0012 095 095 000 Old_age Always - 6548 194 Temperature_Celsius 0x0002 171 127 000 Old_age Always - 35 (Min/Max 15/49) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 1 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 47 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 47 occurred at disk power-on lifetime: 4036 hours (168 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 a8 40 5b e1 Error: UNC 8 sectors at LBA = 0x015b40a8 = 22757544 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 a8 40 5b e0 08 01:23:06.200 READ DMA EXT ec 00 00 00 00 00 a0 08 01:23:06.200 IDENTIFY DEVICE ef 03 45 00 00 00 a0 08 01:23:06.200 SET FEATURES [set transfer mode] ec 00 00 00 00 00 a0 08 01:23:06.200 IDENTIFY DEVICE 25 00 08 a8 40 5b e0 08 01:23:00.400 READ DMA EXT Error 46 occurred at disk power-on lifetime: 4036 hours (168 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 a8 40 5b e1 Error: UNC 8 sectors at LBA = 0x015b40a8 = 22757544 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 a8 40 5b e0 08 01:23:00.400 READ DMA EXT ec 00 00 00 00 00 a0 08 01:23:00.400 IDENTIFY DEVICE ef 03 45 00 00 00 a0 08 01:23:00.400 SET FEATURES [set transfer mode] ec 00 00 00 00 00 a0 08 01:23:00.400 IDENTIFY DEVICE 25 00 08 a8 40 5b e0 08 01:22:54.700 READ DMA EXT Error 45 occurred at disk power-on lifetime: 4036 hours (168 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 a8 40 5b e1 Error: UNC 8 sectors at LBA = 0x015b40a8 = 22757544 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 a8 40 5b e0 08 01:22:54.700 READ DMA EXT ec 00 00 00 00 00 a0 08 01:22:54.700 IDENTIFY DEVICE ef 03 45 00 00 00 a0 08 01:22:54.700 SET FEATURES [set transfer mode] ec 00 00 00 00 00 a0 08 01:22:54.700 IDENTIFY DEVICE 25 00 08 a8 40 5b e0 08 01:22:49.000 READ DMA EXT Error 44 occurred at disk power-on lifetime: 4036 hours (168 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 a8 40 5b e1 Error: UNC 8 sectors at LBA = 0x015b40a8 = 22757544 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 a8 40 5b e0 08 01:22:49.000 READ DMA EXT ec 00 00 00 00 00 a0 08 01:22:49.000 IDENTIFY DEVICE ef 03 45 00 00 00 a0 08 01:22:49.000 SET FEATURES [set transfer mode] ec 00 00 00 00 00 a0 08 01:22:49.000 IDENTIFY DEVICE 25 00 08 a8 40 5b e0 08 01:22:43.300 READ DMA EXT Error 43 occurred at disk power-on lifetime: 4036 hours (168 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 a8 40 5b e1 Error: UNC 8 sectors at LBA = 0x015b40a8 = 22757544 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 a8 40 5b e0 08 01:22:43.300 READ DMA EXT ec 00 00 00 00 00 a0 08 01:22:43.300 IDENTIFY DEVICE ef 03 45 00 00 00 a0 08 01:22:43.300 SET FEATURES [set transfer mode] ec 00 00 00 00 00 a0 08 01:22:43.300 IDENTIFY DEVICE 25 00 08 a8 40 5b e0 08 01:22:37.700 READ DMA EXT SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 4033 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.[list] See alot of problems with the hex codes, can someone help? Trash or good?

Thanks that means alot to me especially since I couldn't have done it without all of your advice and guides I am actually working on taking better pictures and posting temps with my build on my ucd page so will update all pricing as well. Thanks again

Hey thanks for the shoutout Raj, actually the case comes with 6 built in hot swap bays but I chose to buy another 3, total for the case and 9 hotswap bays plus the extra comes out to about $150 shipped in the US. The extra is a trayless monoprice one. So basically I have 9 bays for HDD and 1 for parity. In the future I plan to add 5 3 in 2 for a 15 drive max but I would have to switch out alot of parts to make that happen.

Are there any 5 in 3's that do not require me to bend down the tabs on my case to install?

How about the Zalman MS1000 + Extra ZM1 hotswap cage, its got sound deadening and 3 x 3 hotswap bays granted not at the density you may want but for a budget build you can get a 9 bay hot swap MS1000 OTD for about $220 shipped. A Helios plus 9 monoprice hotswap racks with no fans for the HDD comes out to $190 give or take $20 for shipping, its pretty close....